Latest ProductsSee New Products

2-way bass-reflex bi-amplified nearfield studio monitor
₹48,000.00
16-channel Analog Automation System with Digital Control
₹148,724.00
Stereo/Dual Mono Bus Compressor with Digital Control
₹231,395.00
₹242,648.00
alt=
1-channel Tube Compressor, with Side-chain Highpass Filter and Stereo Link Capability
₹128,056.00

Amphion

Sort By:  
Ultra compact near-field monitor with excellent resolution, imaging and sweet-spot width
₹73,184.00
Near-field 2-way monitor with dual 6½” LF/MF drivers and passive radiators
₹219,527.00
Amphion + Bryston = the perfect pairing.
₹0.00
Ultra compact near-field monitor with excellent resolution, imaging and sweet-spot width
₹53,666.00
Compact 2-Way near-field monitor with excellent resolution, imaging and sweet-spot width
₹109,775.00
Near-field 2-way monitor with dual 5¼” LF/MF drivers and passive radiators
₹146,367.00
Amphion + Bryston = the perfect pairing.
₹0.00
Passive Amphion studio monitoring system featuring Amphion One18 + Amp100
₹329,326.00
Powered subwoofer system with 2 x subwoofer towers and BaseAmp500 amplifier/crossover.
₹634,226.00
Powered low-frequency extension system with 2 x subwoofer towers and 2 x 900W amplifier
₹0.00
Powered low-frequency extension system with 2 x subwoofer towers and 2 x 900W amplifier
₹475,658.00
High-quality portable monitoring kit housed in a rugged wooden travel case
₹0.00
Amphion One15 Passive Nearfield Studio Monitor (Amphion One15 Passive Nearfield Studio Monitor)

Amphion One15 Passive Nearfield Studio Monitor (Single)

The Amphion One15 studio monitors are pure and authentic across the whole frequency spectrum.One15 studio monitors are the optimum affordable nearfield monitors.They offer an impressive stereo image, keeping the accurate balance even at low listening levels. These monitors translate perfectly to any other playback system, saving you time from additional checks and amendments.

Be it for tracking, mixing or mastering,Providing clear and transparent mids, smooth highs, and an incredibly honest bass response, the One15 can easily fit in any musician’s set up, even in those, demanding extra clarity in the low-frequency spectrum.

Any pro-monitoring setup could benefit from Amphion One15s. These high-end passive monitors employ custom-designed drivers, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound needed to make critical mixing decisions.

Every tool a sound engineer or producer uses, either helps to make the final product better or allows working quicker. But with the One15 studio monitors, you can do both. Make better decisions faster no matter if you are composing, tracking or mixing. The One15 nearfield monitors are equally suited to the commercial or home studio environment.

Amphion One15 Features

  • Compact nearfield monitor with all the power for any monitoring situation or setup
  • Powerful ability to resolve sonic details combined with an incredible neutral tonal balance
  • Delivers trustworthy and transparent translation in an affordable nearfield package
  • Handmade in Finland by Amphion
Technical Specs:

Operating principle:
 Two-way, passive radiator
Tweeter: 25 mm / 1” titanium
Mid / woofer: 15 cm / 5¼” aluminium
Crossover point: 1600 Hz
Impendance: 8 Ω
Sensitivity: 84 dB @ 2.83V/1m
Frequency response: 49 - 20 000 Hz +/-3dB
Power recommendation: 20 - 100 W
Measurements (H x W x D): 12.5 x 6.3 x 10.5 in
Weight: 15.5 lb


Ultra compact near-field monitor with excellent resolution, imaging and sweet-spot width
₹73,184.00
Amphion Two18 Passive Nearfield Studio Monitor (Amphion Two18 Passive Nearfield Studio Monitor)

Amphion Two18 Passive Nearfield Studio Monitor (Single)

Near-field 2-way monitor with dual 6½” LF/MF drivers and passive radiators to provide the natural, transparent, un-hyped sound you need to make critical mixing decisions.

The Amphion Two18 passive studio monitors are the number 1 choice for a number of A-list composers, sound engineers, and producers.The Two18 monitors bring them the confidence that their work will translate accurately to the outside world. These loudspeakers provide a neutral presentation, with a phase-accuracy and imaging that is second to none.

Whether you are composing, tracking, mixing, or mastering, the Two18 studio monitors are the perfect tool to assist you finishing your work both faster as well as achieving premium results. These transparent and elegantly-truthful studio monitors are perfectly balanced, and easily respond to any acoustic environment, personal tastes, or music genre.

The Two18 monitor provides very clear definition – particularly space and sonic placement, and even frequency response and dynamic changes. They remain full and sonically constant at lower listening levels, making them ideal for long-haul mix or mastering sessions. The Two18 studio monitors provide exceptionally precise imaging and a wide sweet spot, keeping the sound well-balanced even when you move around the room.

Amphion’s Two18 is a high-end passive monitor that employs custom-designed drivers, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver natural, transparent and un-hyped sound. The dual LF/MF drivers work in tandem with precise phase alignment to reproduce a wide sonic range with exceptional accuracy.

Amphion Two18 Features

  • Amphion's Flagship monitor with 6½” LF/MF drivers, 1" titanium tweeter and passive raditors
  • Delivers unsurpassed levels of detail, 3D depth, stereo width, phase/frequency response
  • Delivers consistent mix translation, removing insecurities regarding frequency or end-results
  • Handmade in Finland by Amphion

Technical Specs:

Operating principle: Two-way, passive radiators
Tweeter: 25 mm / 1” titanium
Mid / woofer: 18 cm / 6½” aluminium
Crossover point: 1600 Hz
Impendance: 4 Ω
Sensitivity: 89 dB @ 2.83V/1m
Frequency response: 40 - 20 000 Hz +/-3dB
Power recommendation: 50 - 200 W
Measurements (H x W x D): 21.65 x 7.5 x 12 in
Weight: 40 lb


Near-field 2-way monitor with dual 6½” LF/MF drivers and passive radiators
₹219,527.00
Amphion Two18 + Bryston 4B ST Studio Monitor Bundle (Amphion Two18 + Bryston 4B ST Studio Monitor Bundle)

Amphion Two18 + Used Bryston 4B ST Studio Monitor Bundle

Amphion + Bryston = the perfect pairing. While supplies last, buy a new pair of Amphion Two18 studio monitors and bundle it with a USED Bryston 4B ST.Don't wait–very limited quantities available!

Bryston Amps are used, in good physical condition and in perfect working order. Come fully tested by our service tech and include a 6-month RSPE Platinum Warranty. 

Amphion Two18 Studio Monitor

The Amphion Two18 passive studio monitors are the number 1 choice for a number of A-list composers, sound engineers, and producers. The Two18 monitors bring them the confidence that their work will translate accurately to the outside world. These loudspeakers provide a neutral presentation, with a phase-accuracy and imaging that is second to none.

Whether you are composing, tracking, mixing, or mastering, the Two18 studio monitors are the perfect tool to assist you finishing your work both faster as well as achieving premium results. These transparent and elegantly-truthful studio monitors are perfectly balanced, and easily respond to any acoustic environment, personal tastes, or music genre.

The Two18 monitor provides very clear definition – particularly space and sonic placement, and even frequency response and dynamic changes. They remain full and sonically constant at lower listening levels, making them ideal for long-haul mix or mastering sessions. The Two18 studio monitors provide exceptionally precise imaging and a wide sweet spot, keeping the sound well-balanced even when you move around the room.

Amphion’s Two18 is a high-end passive monitor that employs custom-designed drivers, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver natural, transparent and un-hyped sound. The dual LF/MF drivers work in tandem with precise phase alignment to reproduce a wide sonic range with exceptional accuracy.

Amphion Two18 Features

  • Amphion's Flagship monitor with 6½” LF/MF drivers, 1" titanium tweeter and passive raditors
  • Delivers unsurpassed levels of detail, 3D depth, stereo width, phase/frequency response
  • Delivers consistent mix translation, removing insecurities regarding frequency or end-results
  • Handmade in Finland by Amphion

Classic Bryston 4B ST Stereo Amplifier

The Bryston 4B-ST stereo amplifier consists of two amplifier modules, each with its own +/- 85v power supply. Each of the two amplifier modules uses eight of Bryston's custom power transistors for a total of 16 output devices. The two channels may be operated independently (at 250 watts per channel @ 8 ohms, 400 watts @ 4 ohms), or combined to form a single 800 watt monaural amplifier into 8 ohms.

Bryston amplifiers come equipped with one unbalanced RCA (single-ended0 and one balanced combination XLR 1/4 inch jacks per channel. All inputs use fully discrete buffer circuitry. The balanced inputs use a combination 3-pin XLR and 1/4" tip-ring-sleeve input connector. All input connectors are gold-plated and should only be used with high-quality gold plated interconnect cable, as a poorly plated connector will eventually corrode through the gold flash.

Bryston ST series amplifiers have gain levels that match the type of input used. This provides overall system gain that is consistent whether RCA, XLR/Phone bridged or stereo is selected.

Bryston 4B St Features

  • Solid-state stereo power amplifier
  • Output power: 250W continuous into 8 ohms (24dBW), 400Wpc rms continuous into 4 ohms (23dBW); 800W continuous into 8 ohms in bridged mode (29dBW)
  • Current delivery: 16A continuous, 48A peak, per channel
  • Frequency response: 1Hz–100kHz, ±3dB for 1W output
  • Total harmonic distortion: <0.007%, 20 Hz- 20 kHz @ 250 Wpc
  • S/N Ratio: hum and noise, 108dB below rated output, 90dB IHF
  • Input sensitivity: 1.4V for 250Wpc into 8 ohms
  • Voltage gain: 30dB
  • THD+noise: 20Hz–20kHz, 0.01%
  • IM distortion (60Hz+7kHz, 4:1, SMPTE method): less than 0.01% at rated power
  • Damping factor: greater than 500 at 20Hz, at 8 ohms (equivalent to an output impedance of less than 0.016 ohms)
  • Input impedance: 50k ohms unbalanced, 30k ohms balanced
  • Polarity: non-inverting
  • Gold-plated connectors

Technical Specs:

Operating principle: 
Two-way, passive radiators
Tweeter: 25 mm / 1” titanium
Mid / woofer: 18 cm / 6½” aluminium
Crossover point: 1600 Hz
Impendance: 4 Ω
Sensitivity: 89 dB @ 2.83V/1m
Frequency response: 40 - 20 000 Hz +/-3dB
Power recommendation: 50 - 200 W
Measurements (H x W x D): 21.65 x 7.5 x 12 in
Weight: 40 lb
Amphion + Bryston = the perfect pairing.
₹0.00
Amphion One12 Passive Nearfield Studio Monitor (Single) (Amphion One12 Passive Nearfield Studio Monitor (Single))

Amphion One12 Passive Nearfield Studio Monitor (Single)

Ultra compact near-field monitor with excellent resolution, imaging and sweet-spot width in a small but powerful package

The Amphion One12 studio monitor is a compact 2-way passive studio monitor that utilizes a 1″ (25mm) titanium dome tweeter set in a Corian waveguide.The tweeter is meticulously aligned with a 4.5” (115mm) woofer, delivering surprisingly tight and even lows for speakers with such a small footprint. This approach, together with a very low crossover at 1600 Hz, ensures a rock-solid “phantom” center image, exceptional time and phase coherence, spectacular 3D soundstage and imaging, and an extremely wide and deep sweet spot.

These small One12 monitors provide an amazingly correct translation to much bigger mixing and mastering studio systems, home audio setups, or even large PA systems. Many other monitors fall apart at low listening volume, but the One12 sounds equally solid at any volume.

The One12 monitors are a perfect fit for home studios, small post-production edit bays, mobile trucks, or FOH where space is a precious commodity. Designed for any pro audio application, in the studio, or on-the-go, these extreme-nearfields take the room out of the equation and allow you to listen to the pure music – and not affected by the surrounding acoustics. One12 studio monitors are like a large pair of high-resolution headphones which are very comfortable to wear all day long but also allow sharing the experience with the whole production team.

Amphion One12 Features

  • First-class resolution, imaging, sweet spot width, and depth in a small but powerful package
  • Compact studio monitors that are created for low-volume performance and superb imaging
  • Translation at its best – from bedroom studios to commercial studios to PA monitoring
  • Handmade in Finland by Amphion

Technical Specs:

Operating principle: Two-way, passive radiator
Tweeter: 25 mm / 1” titanium
Mid / woofer: 12 cm / 4½” aluminium
Crossover point: 1600 Hz
Impendance: 8 Ω
Sensitivity: 84 dB @ 2.83V/1m
Frequency response: 78 - 20 000 Hz +/-3dB
Power recommendation: 20 - 100 W
Measurements (H x W x D): 10.25 x 2.5 x 8.7 in
Weight: 13.25 lb


Ultra compact near-field monitor with excellent resolution, imaging and sweet-spot width
₹53,666.00
Amphion One18 Passive Nearfield Studio Monitor (Amphion One18 Passive Nearfield Studio Monitor)

Amphion One18 Passive Nearfield Studio Monitor (Single)


The Amphion One18 studio monitors offer a wide sweet spot and pinpoint-accurate imaged sound. This allows for fast and accurate creative decisions.Whether you are writing music, recording, or mixing, the One18 loudspeakers can be your creative weapon-of-choice. Thanks to their natural tone and balanced frequency response you can enjoy 12-hour-long sessions, with no ear fatigue.Compact 2-Way near-field monitor with excellent resolution, imaging and sweet-spot width delivering unparalleled sonic clarity and sound image

Extremely detailed but not bright or harsh, the One18 studio monitors allow you to achieve great results quicker and without any doubt. Their perfect translation to any other listening system or environment brings no surprises when auditioning your work outside of your studio.

While being remarkably accurate, One18 monitors are strikingly musical and able to translate not only the finest mixing details but also the most delicate acoustic emotions. This results in an effective and deeply enjoyable music-creating process.

The Amphion One18 studio monitor offers premium performance for critical monitoring sessions. These high-end passive monitors employ a custom-designed 6.5″ (180mm) woofer, a fast-response titanium tweeter, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound you need to make critical mixing decisions.

Amphion One18 Features

  • The new studio-standard for nearfield monitors delivering an exquisite sonic performance
  • The One18s Cost-Performance alone make these a vital addition to any studio – large or small
  • This muscular monitor workhorse produces unparalleled sonic clarity and sound image
  • Handmade in Finland by Amphion


Technical Specs:

Operating principle: Two-way, passive radiator
Tweeter: 25 mm / 1” titanium
Mid / woofer: 18 cm / 6½” aluminium
Crossover point: 1600 Hz
Impendance: 8 Ω
Sensitivity: 85 dB @ 2.83V/1m
Frequency response: 45 - 20 000 Hz +/-3dB
Power recommendation: 30 - 150 W
Measurements (H x W x D): 15 x 7.5 x 12 in
Weight: 26.5 lb



Compact 2-Way near-field monitor with excellent resolution, imaging and sweet-spot width
₹109,775.00
Amphion Two15 Passive Nearfield Studio Monitor (Amphion Two15 Passive Nearfield Studio Monitor)

Amphion Two15 Passive Nearfield Studio Monitor (Single)

Near-field 2-way monitor with dual 5¼” LF/MF drivers and passive radiators to provide excellent resolution, imaging and sweet-spot width.

The Amphion Two15 is a passive nearfield monitor with exceptionally low levels of distortion, tonal balance, and neutrality–allowing you to spend more time creating and less time re-mixing. With Amphion Two15 studio monitors you do not need to check your mixes on various other systems anymore. Two15 loudspeakers ensure that your mixes sound identical outside the studio as they do in your own.

No matter if you are composing or mixing, Two15 deliver you the musical detail you need in order to make the right creative decision. These speakers are able to draw out the finest spatial details without masking the big picture. Two15 studio monitors present dynamic, frequency and transient content in extreme resolution. Two15 loudspeakers truthfully reproduce the material with all engineering nuances while retaining the musical emotions present and vivid. This allows for highly effective, fast and intuitive work, which still keeps the fun as a part of the process.

The dual LF/MF drivers of Two15 studio monitors work together in perfect phase alignment to reproduce a wide sonic range with exceptional accuracy. These high-end passive speakers employ custom-designed drivers, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound you need to make critical mixing decisions.

Amphion Two15 Features

  • Two15s are celebrated for their exceptionally low levels of distortion, tonal balance, neutrality
  • Two15s remain, for many composers and producers, the creative tool-of-choice in the studio
  • For mix/mastering engineers requiring bass without hype and no room/desire for subwoofers
  • Handmade in Finland by Amphion


Technical Specs:


Operating principle: Two-way, passive radiators
Tweeter: 25 mm / 1” titanium
Mid / woofer: 15 cm / 5¼” aluminium
Crossover point: 1600 Hz
Impendance: 4 Ω
Sensitivity: 86 dB @ 2.83V/1m
Frequency response: 44 - 20 000 Hz +/-3dB
Power recommendation: 50 - 200 W
Measurements (H x W x D): 20.1 x 6.3 x 10.5 in
Weight: 26.5 lb
Near-field 2-way monitor with dual 5¼” LF/MF drivers and passive radiators
₹146,367.00
Amphion One18 + Bryston 4B ST Studio Monitor Bundle (Amphion One18 + Bryston 4B ST Studio Monitor Bundle)

Amphion One18 + Used Bryston 4B ST Studio Monitor Bundle

Amphion + Bryston = the perfect pairing. While supplies last, buy a new pair of Amphion One18 studio monitors and bundle it with a USED Bryston 4B ST. Don't wait–very limited quantities available!

Amphion One18 Studio Monitors

The Amphion One18 studio monitors offer a wide sweet spot and pinpoint-accurate imaged sound. This allows for fast and accurate creative decisions. Whether you are writing music, recording, or mixing, the One18 loudspeakers can be your creative weapon-of-choice. Thanks to their natural tone and balanced frequency response you can enjoy 12-hour-long sessions, with no ear fatigue.

Extremely detailed but not bright or harsh, the One18 studio monitors allow you to achieve great results quicker and without any doubt. Their perfect translation to any other listening system or environment brings no surprises when auditioning your work outside of your studio.

While being remarkably accurate, One18 monitors are strikingly musical and able to translate not only the finest mixing details but also the most delicate acoustic emotions. This results in an effective and deeply enjoyable music-creating process.

The Amphion One18 studio monitor offers premium performance for critical monitoring sessions. These high-end passive monitors employ a custom-designed 6.5″ (180mm) woofer, a fast-response titanium tweeter, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound you need to make critical mixing decisions.

Amphion One18 Features

  • The new studio-standard for nearfield monitors delivering an exquisite sonic performance
  • The One18s Cost-Performance alone make these a vital addition to any studio – large or small
  • This muscular monitor workhorse produces unparalleled sonic clarity and sound image
  • Handmade in Finland by Amphion

Classic Bryston 4B ST Stereo Amplifier

The Bryston 4B-ST stereo amplifier consists of two amplifier modules, each with its own +/- 85v power supply. Each of the two amplifier modules uses eight of Bryston's custom power transistors for a total of 16 output devices. The two channels may be operated independently (at 250 watts per channel @ 8 ohms, 400 watts @ 4 ohms), or combined to form a single 800 watt monaural amplifier into 8 ohms.

Bryston amplifiers come equipped with one unbalanced RCA (single-ended0 and one balanced combination XLR 1/4 inch jacks per channel. All inputs use fully discrete buffer circuitry. The balanced inputs use a combination 3-pin XLR and 1/4" tip-ring-sleeve input connector. All input connectors are gold-plated and should only be used with high-quality gold plated interconnect cable, as a poorly plated connector will eventually corrode through the gold flash.

Bryston ST series amplifiers have gain levels that match the type of input used. This provides overall system gain that is consistent whether RCA, XLR/Phone bridged or stereo is selected.

Bryston 4B St Features

  • Solid-state stereo power amplifier
  • Output power: 250W continuous into 8 ohms (24dBW), 400Wpc rms continuous into 4 ohms (23dBW); 800W continuous into 8 ohms in bridged mode (29dBW)
  • Current delivery: 16A continuous, 48A peak, per channel
  • Frequency response: 1Hz–100kHz, ±3dB for 1W output
  • Total harmonic distortion: <0.007%, 20 Hz- 20 kHz @ 250 Wpc
  • S/N Ratio: hum and noise, 108dB below rated output, 90dB IHF
  • Input sensitivity: 1.4V for 250Wpc into 8 ohms
  • Voltage gain: 30dB
  • THD+noise: 20Hz–20kHz, 0.01%
  • IM distortion (60Hz+7kHz, 4:1, SMPTE method): less than 0.01% at rated power
  • Damping factor: greater than 500 at 20Hz, at 8 ohms (equivalent to an output impedance of less than 0.016 ohms)
  • Input impedance: 50k ohms unbalanced, 30k ohms balanced
  • Polarity: non-inverting
  • Gold-plated connectors

Technical Specs:

Operating principle: Two-way, passive radiator
Tweeter: 25 mm / 1” titanium
Mid / woofer: 18 cm / 6½” aluminium
Crossover point: 1600 Hz
Impendance: 8 Ω
Sensitivity: 85 dB @ 2.83V/1m
Frequency response: 45 - 20 000 Hz +/-3dB
Power recommendation: 30 - 150 W
Measurements (H x W x D): 15 x 7.5 x 12 in
Weight: 26.5 lb


Amphion + Bryston = the perfect pairing.
₹0.00
Amphion One18 + Amp100 Studio Monitor Bundle (Amphion One18 + Amp100 Studio Monitor Bundle)

Amphion One18 + Amp100 Studio Monitor Bundle


The Amphion One18 studio monitors offer a wide sweet spot and pinpoint-accurate imaged sound. This allows for fast and accurate creative decisions. Whether you are writing music, recording, or mixing, the One18 loudspeakers can be your creative weapon-of-choice. Thanks to their natural tone and balanced frequency response you can enjoy 12-hour-long sessions, with no ear fatigue.

Extremely detailed but not bright or harsh, the One18 studio monitors allow you to achieve great results quicker and without any doubt. Their perfect translation to any other listening system or environment brings no surprises when auditioning your work outside of your studio.

While being remarkably accurate, One18 monitors are strikingly musical and able to translate not only the finest mixing details but also the most delicate acoustic emotions. This results in an effective and deeply enjoyable music-creating process.

The Amphion One18 studio monitor offers premium performance for critical monitoring sessions. These high-end passive monitors employ a custom-designed 6.5″ (180mm) woofer, a fast-response titanium tweeter, a high-density Corian waveguide, and a sealed enclosure with a passive radiator to deliver the natural, transparent, un-hyped sound you need to make critical mixing decisions.

Amphion One18 Features

  • The new studio-standard for nearfield monitors delivering an exquisite sonic performance
  • The One18s Cost-Performance alone make these a vital addition to any studio – large or small
  • This muscular monitor workhorse produces unparalleled sonic clarity and sound image
  • Handmade in Finland by Amphion 

Technical Specs:

Operating principle: Two-way, passive radiator
Tweeter: 25 mm / 1” titanium
Mid / woofer: 18 cm / 6½” aluminium
Crossover point: 1600 Hz
Impendance: 8 Ω
Sensitivity: 85 dB @ 2.83V/1m
Frequency response: 45 - 20 000 Hz +/-3dB
Power recommendation: 30 - 150 W
Measurements (H x W x D): 15 x 7.5 x 12 in
Weight: 26.5 lb
Passive Amphion studio monitoring system featuring Amphion One18 + Amp100
₹329,326.00
Amphion BaseOne25 System (Amphion BaseOne25 System)

Amphion BaseOne25 System - BaseOne25 LF Extension Towers with BaseAmp500 Crossover/Amplifier Module

Powered subwoofer system with 2 x subwoofer towers and BaseAmp500 amplifier/crossover.

The Amphion BaseOne25 bass extension system offers a complete solution to seamlessly transform studio monitors into a true stereo full-range monitoring system.The BaseOne25 extends all the way down to 20Hz while simultaneously improving dynamic range and minimizing distortion by handling most of the heavy-lifting at the low end of the sound spectrum.

The BaseOne25 is designed to pair with either One18 or Two18 studio monitors, depending on your needs, room size and its acoustics. The bass extension is a perfect fit to a mixing or mastering studio, or even to a music-composing setup.

Driven by Amphion’s meticulously developed BaseAmp500 crossover/amplifier module, the BaseOne25 LF extension towers sit directly under the existing studio monitors. This makes physical integration and phase/time alignment much easier to achieve. Full range/monitor only -views into your music are available at the touch of a button (or a foot switch).

The result is a breathtaking 3D soundscape so accurate that you’ll swear the musicians are playing right in front of you … even with your eyes open!

Amphion BaseOne25 Features

  • BaseOne25 transforms studio monitors into a true stereo, full-range, monitoring system.
  • Life-like, natural, bass response with perfect phase coherence when paired with Amphion monitors
  • Dual 10” (250mm) aluminum drivers effortlessly delivering solid, full bass as low as 20Hz.
    
 
Technical Specs:

Operating principle: One-way, passive radiator
Mid / woofer: 25 cm / 10” aluminium
Crossover point: 100 Hz
Frequency response: 20 - 100 Hz +/-3dB
Measurements (H x W x D): 38" x 7.5" x 15.25" in
Weight: 90 lb

Powered subwoofer system with 2 x subwoofer towers and BaseAmp500 amplifier/crossover.
₹634,226.00
Amphion BaseTwo25 System (Amphion BaseTwo25 System)

Amphion BaseTwo25 System - BaseTwo25 LF Extension Towers with BaseAmp1000 and BaseTwo25 Crossover

Powered low-frequency extension system with 2 x subwoofer towers and 2 x 900W amplifier

The Amphion BaseTwo25 is a state-of-the-art monitoring solution converting any Amphion two-way studio monitor into a full-range, time and phase coherent, three-way system.These full-range towers extend all the way down to 20Hz. Each BaseTwo25 has 2 x 25 cm woofers (top) and matching 2 x 25 cm radiators (below) mounted in back to back force-canceling mode on both sides of the cabinet. The system is driven by 2 x 900W amplifier, and controlled by Amphion’s signature filtering module with a variable-level attenuator.

BaseTwo25 low-frequency extension system fits equally well in any composing, mixing, or mastering setup, where correct reproduction and appreciation of the lowest octave is critical. Amphion’s innovative approach to low-frequency monitoring provides producers, sound engineers and artists with a completely new perspective to the base.

In addition to providing tight, tuneful bass, BaseTwo25 improves midrange clarity and increases the midrange power-handling abilities of the paired monitors. This is achieved by gradually transferring the low-end frequencies from the monitors to the base extenders.

Amphion BaseTwo25 Features

  • Perfectly integrated time and phase coherent, three-way system, extending all the way down to 20Hz.
  • Extremely robust 25 cm (10”) woofers with matching 25 cm passive radiators mounted in back to back force canceling mode on both sides of the cabinet.
  • Driven by 2 x 900W amplifiers housed in a 2U rack chassis and a stand-alone 1U filtering module with variable-volume control.

BaseTwo25
Operating principle: One-way, passive radiator
Woofer: 2 x 25 cm / 10” aluminium
Crossover point: 100 Hz
Passive radiator: 2 x 25 cm / 10” aluminium
Frequency response: 20 - 100 Hz +/-3dB
Measurements (H x W x D): 956 x 191 x 386 mm
Weight: 154 lb


Amp1000
Output power: 2x900W RMS into 4 Ω @ 1% THD
Frequency response: 10Hz - 65kHz (-3dB)
Distortion: @100W: 0,006% (100 Hz)
Distortion: @ 1W: 0,003% (100 Hz)
Signal to noise ratio: 93dB @ 1W
Efficiency: 85% @ full power (230V operation)


Powered low-frequency extension system with 2 x subwoofer towers and 2 x 900W amplifier
₹0.00
Amphion FlexBase25 System (Amphion FlexBase25 System)

Amphion FlexBase25 System - FlexBase LF Extension Tower with FlexAmp500

Amphion’s FlexBase25 in a modern approach to subwoofer design. FlexBase25 is room friendly and equally suited for studio acoustics as well as less-treated home studio environments. It is easy to setup and intuitive to adjust. FlexBase25 is a single box, stereo base extension system, which is placed in the centre line between the main speakers.Stereo bass-extension and management system with a separate LFE-channel input and a 600W amplifier

The Amphion FlexBase 25 is a single box, stereo subwoofer, which is placed in the center line between the main speakers. Wide adjustment possibilities over crossover frequency (35-260 Hz), subwoofer level, as well as the mono-stereo spread, allow FlexBase to address the needs of a rapidly changing landscape of modern music-making. With a turn of a few dials, the system can be adapted to what best works for the project an engineer is working on.

FlexBase can be fat, fun, and vibey when writing and producing. It will be precise, correct, and analytical when putting the finishing touches on a song or a film score. The system will allow you to continue to use your monitors for a narrower midrange view, as FlexBase can be bypassed. FlexBase works with all Amphion products. Pair it with One12, One15, Two15 or One18 for a smaller room full range system or place it with behind the console while keeping your One18, Two15 or Two18 on the meter bridge.

A single mono subwoofer is part of a movie format, but Amphion does not believe it is good enough to be used in music production. In music, it is necessary to keep the stereo information throughout the whole frequency band. Amphion’s FlexBase25 presents you with an unconventional approach to subwoofer design that should fit especially well with the rapidly changing landscape of modern music-making and will satisfy even the most demanding producers or sound engineers.

Amphion FlexBase25 Features

  • Variable crossover frequency allows changing the flavor of the system to match the specifics of the various production tasks.
  • Mono/stereo spread adjustment to ensure precise system-integration, even when higher crossover points are used.
  • Fast and simple-to-set-up, easily adapting to a large variety of projects and acoustic environments.

Technical Specs:


FelxBase25
Operating principle: One-way
Woofer: 25 cm / 10” aluminium
Crossover slopes: 35-260Hz
Crossover frequency: 24dB/octave
THD+N @ 0dBu: -100dB
System bandwidth: 6Hz - 200 kHz
Frequency response:
  • 20 Hz – 260 Hz +/-3dB (low pass)
  • 35 Hz – 200 kHz +/-3dB (high pass)
Input impedance: 25 kOhm
Output impedance: 100 Ohm
Measurements (H x W x D): 840 x 342 x 321 mm
Max HPF level: +20dBu
Weight: 99 lb


FlexAmp500
Output power: 600W RMS into 4 Ω @ 1% THD
Frequency response: 10Hz - 65kHz (-3dB)
Distortion: @ 1W: 0,003% (100 Hz)
Distortion: @100W: 0,006% (100 Hz)
Signal to noise ratio: 93dB @ 1W
Efficiency: 85% @ full power (230V operation)
Weight: 11 lb
Powered low-frequency extension system with 2 x subwoofer towers and 2 x 900W amplifier
₹475,658.00
BaseTwo25 LF Extension Towers with BaseAmp1000 and BaseTwo25 Crossover (BaseTwo25 LF Extension Towers with BaseAmp1000 and BaseTwo25 )

Amphion MobileOne12 Studio Monitor System - One12 Studio Monitors, Amp100 Mono Amplifiers, and Speaker Cables in a Wooden Travel Case

A high-quality portable monitoring kit housed in a rugged wooden travel case, so you can take the superior sound of your Amphion monitors with you on the road.

The Amphion MobileOne12 allows audio engineers and producers to take the Amphion sound with them anywhere they go.

The portable system features the compact One12 studio monitors along with a pair of Amp100 monoblock amplifiers and Amphion’s professional grade speaker cables – all housed in a sturdy wooden travel case padded to ensure easy and safe transportation.

The One12 studio monitors provide a stunning translation to much bigger mixing and mastering studio systems, home audio setups and even large PA systems. Many other monitors fall apart at low listening volume, but One12 sounds equally well at any volume. This allows them to be used in any acoustic environment, being a studio or a hotel room, while keeping it out of the equation.

MobileOne12 makes a perfect fit for artists and producers on-the-go who strive to keep the sound quality of their production. The system makes also a good fit to home studios, small post-production edit bays, mobile trucks or FOH where space is a precious commodity.

Amphion MobileOne12 Features

  • Handy portability, offering studio-quality monitoring in any remote-from-studio location.
  • Standalone 2nd reference set solution for engineers|producers, or creative tool for composers.
  • Developed to fit the home studio, edit bay, FOH, mobile truck where space is at a premium.

Technical Specs:

BaseTwo25
Operating principle: One-way, passive radiator
Woofer: 2 x 25 cm / 10” aluminium
Crossover point: 100 Hz
Passive radiator: 2 x 25 cm / 10” aluminium
Frequency response: 20 - 100 Hz +/-3dB
Measurements (H x W x D): 956 x 191 x 386 mm
Weight: 154 lb


Amp1000
Output power: 2x900W RMS into 4 Ω @ 1% THD
Frequency response: 10Hz - 65kHz (-3dB)
Distortion: @100W: 0,006% (100 Hz)
Distortion: @ 1W: 0,003% (100 Hz)
Signal to noise ratio: 93dB @ 1W
Efficiency: 85% @ full power (230V operation)


High-quality portable monitoring kit housed in a rugged wooden travel case
₹0.00
Per Page      1 - 12 of 12
  • 1