Dynaudio Pro

Sort By:  
Two 9.5" MSP+ Hybrid Drive long
₹171,500.00
₹108,500.00
Dynaudio
₹293,200.00
₹325,600.00
Studio Reference Monitor with 1" Esotar Pro tweeter, 5" midrange, 9.5" woofer
₹269,900.00
₹299,500.00
Dynaudio Pro
₹179,900.00
₹199,700.00
Dynaudio
₹219,800.00
₹245,000.00
Dynaudio Pro
₹219,800.00
₹245,000.00
Dynaudio Pro
₹111,800.00
₹123,800.00
Dynaudio Pro
₹111,800.00
₹123,800.00
Dynaudio
₹135,000.00
₹151,000.00
Dynaudio Pro
₹135,000.00
₹151,000.00
Dynaudio Pro
₹159,800.00
₹177,800.00
Dynaudio
₹159,800.00
₹177,800.00
Dynaudio Pro 18S (18S)
  • 500W Powered Subwoofer
  • Two 9.5" MSP+ Hybrid Drive long-throw woofers for accurate low-frequency reproduction
  • Advanced DSP with updatable presets for a range of Dynaudio pro studio monitors
  • Built-in 3-band parametric EQ
  • Master/Slave feature for daisy-chaining multiple subs
  • Dual-opposing driver design principle
  • Frequency response: 16Hz—230Hz ±3dB
Product Description

Dynaudio's 18S is a serious, pro-grade subwoofer that gets you tightly down to 16Hz. You'll feel the crush of a well-recorded kick drum. The full weight of a 5-string bass. You'll also be able to identify any low-frequency mud that needs to be cleaned up. To properly record frequencies this low, you've got to be able to hear them. Adding the 18S to your monitoring setup opens up a new world of performance that lets you record, mix, and master with meticulous accuracy — and deliver tracks that translate perfectly to the world beyond your studio. Employing dual-opposing 9.5" long-throw MSP+ Hybrid Drive units and 500 watts of Class D amplification, the 18S features intelligent DSP that seamlessly tailors its performance to popular Dynaudio high-end monitors, for true full-range monitoring that will help you make better recordings.

Advanced DSP automatically mates with popular Dynaudio monitors


The 18S is engineered with Dynaudio's advanced DSP modeling technology that acoustically mates the 18S to any of the company's pro studio monitors from the BM and LYD series and above, essentially turning a two-way speaker into a three-way system. And if you combine the 18S with an LYD 48 stereo or surround setup, you’ll have a four-way monitoring system. Tight integration of your full-range speakers with your sub is key for critical accuracy during the recording, mixing, and mastering process. For Dynaudio, this involved assessing the acoustical characteristics of each of their popular high-end studio monitors and creating customized performance maps for each one. You select the specific Dynaudio speakers you are using from the 18S display's menu, and the appropriate roll off will be applied automatically. The process is also future-proof: when Dynaudio adds new monitors to their range, 18S firmware updates that include the new speakers' performance maps will be made available — so your monitoring system can grow according to your needs.

Flexible time- and phase-aligned integration into any studio setup

The 18S is fitted with a selection of RCA and XLR connections for flexible integration into your studio setup and includes a number of handy features to assist with integration into more advanced systems. This includes your ability to set a time delay to ensure the subwoofer and main speakers are working in perfect synchronicity. Simply enter the distance from the sub to the speakers, and the 18S automatically adjusts itself using time and phase delays. Also onboard is a three-way parametric equalizer to defeat room modes that could adversely affect the accuracy of your recordings.

Dual-opposing driver design for power and punch


In the 18S, two new drivers reside at either end of the cabinet, which is wider than it is deep for placement convenience. Delivering a powerful one-two punch is a pair of Dynaudio's cutting-edge MSP+ Hybrid Drive units in a dual-opposing configuration, powered by a 500-watt Class D amplifier.

Hear every nuance and produce mixes that translate

For for the 18S, Dynaudio designed a brand-new driver they call the MSP+ Hybrid Drive. It's made from aluminum rather than the company's usual magnesium silicate polymer. It's effectively a sandwich, with paper backing and an MSP dust-cap on the front. In recent years, the efficacy of sandwich construction has proven its worth for subwoofers, which typically require a more critical balance between stiffness, lightness, and damping than standard speaker drivers. Aside from the technology under the hood, Sweetwater can confirm that the 18S's performance is exemplary. It's a sub that integrates seamlessly with your Dynaudio monitors and lets you work with unfettered creative freedom, confident that you're hearing every nuance — and that your mixes will translate to any playback system.

Features:

  •     Onboard 500-watt Class D amplifier
  •     Preset speaker crossover filters
  •     Dual-opposing driver design principle
  •     Two 9.5" MSP+ Hybrid Drive long-throw woofers for accurate low-frequency reproduction
  •     Flexible time- and phase-aligned integration into any studio setup
  •     Frequency response: 16Hz—230Hz ±3dB
  •     Advanced DSP with updatable presets for a range of Dynaudio pro studio monitors
  •     Built-in 3-band parametric EQ
  •     Master/Slave feature for daisy-chaining multiple subs
  •     I/O connectors: balanced XLR, unbalanced RCA
  •     Auto On/Off for energy conservation
Two 9.5" MSP+ Hybrid Drive long
₹171,500.00
₹108,500.00
Dynaudio Pro BM15A (Pair) ( BM15A (Pair) )
  • Active nearfield monitor with 10" woofer and 1.1" silk dome tweeter
  • Frequency response 40Hz - 22kHz (+/- 3 dB)
  • Maximum SPL at 1 meter, pair (IEC Long Term) - 124 dB RMS
  • Maximum SPL at 2 meters, 5.1 (IEC Long Term) - 125.5 dB RMS
  • Amplifier power - Tweeter: 100 W / Woofer: 200 W
  • Bass reflex cabinet with radius edges on front baffle
  • Esotec tweeter with soft dome, rear chamber, magnetic fluid cooled
  • One-piece molded polypropylene cone woofer with 4" pure aluminum wire voice coil
  • Handcrafted aluminum drivers
  • 124dB SPL peak power output
  • HF & LF analog trim filters
Product Description

The BM15A is a revolutionary nearfield monitor offering exceptionally high performance. Its full range extended bass response makes it the perfect nearfield monitor, particularly for commercial studios, project studios and post production facilities.

The BM15A is a relatively large 2-way active system comprising of a large 240mm (10") woofer, a special version of the Dynaudio ESOTEC soft dome tweeter and an electronic phase-aligned crossover, which feeds the build-in dual, high performance discrete MOSFET amplifiers.

The ESOTEC HF driver spells quality and headroom due to a dynamic headroom of 1000W, and the 240mm (10") bass driver is world-renowned for its 100mm (4") aluminium alloy voice coil, which outperforms most 300mm (12") drivers in terms of power output and sheer punch.

The electronics offer complex protection circuitry helping to prevent accidental damage to the drivers, while still providing maximum transient response.

The BM15A monitor is front ported for powerful and extended low frequency response, and the elegant matte cabinet has radius edges on the front baffle to reduce boundary effects and improve the overall sound quality.

100% custom-designed and built drivers, cabinets and electronics
Like all Dynaudio monitors, the BM15A is completely custom-designed and built to assure a perfect match of components. The drivers are specifically designed to avoid acoustic and performance problems that would require extensive manipulation of crossovers to correct. The cabinets are crafted in Dynaudio's Denmark facility and minimize resonance while enhancing bass response. And the BM15A's crossovers, protection circuitry and power amplifiers all are optimized for maximum performance, phase-coherent reproduction and high SPLs.

A 10" woofer that outperforms most 12" drivers
Key to the BM15A is its 10" low frequency driver. Dynaudio molds its cone of Magnesium Silicate Polymer with their special "flat cone" geometry for outstanding transient response and minimal breakup. With a cast aluminum frame, oversized vented magnet and 4" aluminium alloy voice coil this driver outperforms most 12" speakers in terms of power output and sheer punch. In fact, the BM15A delivers clean, tight bass response down to 30Hz.

Master-built bass reflex cabinet
Also built in Dynaudio's plant, the BM15A enclosure is constructed of hand-selected premium woods and quality veneers. Its front bass port contributes to the BM15A's solid low frequencies. Radius edges on the front baffle reduce boundary effects and improve the overall sound quality. And with its elegant matte finish the BM15A looks every bit as good as it sounds!

Precision electronics for the cleanest possible signal
Thanks to its custom-designed phase-coherent electronic crossover with a 30dB per octave slope the BM15A offers a seamless transition between drivers. You've got plenty of power from the built-in high performance discrete MOSFET amplifiers, with 200 watts for the low frequency driver and 100 watts for highs. Precision protection circuitry ensures the drivers are safe from damage. If you demand ultimate quality in sound reproduction you don't want to miss the BM15A!



Specifications:

  • Powered     Yes
  • Power Configuration     Bi-amped
  • LF Driver Size     9"
  • LF Driver Type     Cone
  • LF Driver Material     Polypropylene
  • HF Driver Size     1.1"
  • HF Driver Type     Soft Dome
  • HF Driver Material     Aluminum
  • LF Driver Power Amp     200W
  • HF Driver Power Amp     100W
  • Total Power     300W
  • Frequency Range     40Hz - 22kHz
  • Crossover Frequency     1800 Hz 30 dB/Oct
  • Maximum Peak SPL     124dB
  • Enclosure Type     Ported
  • Input Types     1 x XLR
  • Height     17.9"
  • Width     11.4"
  • Depth     15.2"
  • Weight     41 lbs.


Dynaudio
₹293,200.00
₹325,600.00
Dynaudio Pro Core 59 (Single) (Core 59 (Single))
  • Studio Reference Monitor with 1" Esotar Pro tweeter, 5" midrange, 9.5" woofer
  • Class D Pascal tri-amplification: HF 150 watts / MF 500 watts / LF 500 watts
  • Frequency response: 42Hz–21kHz ±3dB (36Hz–24kHz -6dB)
  • Core DSP optimizes imaging, balance, and bass extension
  • Sampling rate: 192kHz, resolution: 64-bit; dependent on input signal
  • Maximum SPL: 112dB at 1m anechoic, 118dB half space
  • Analog and digital inputs
  • Front-loaded bass reflex cabinet design
  • All drivers handcrafted by Dynaudio in Denmark
Product Description

When you’re working with art – whether it’s someone else’s or your own – you need equipment you can trust. A professional producer or engineer is part of the creative process, and his or her ears are the most trustworthy tools they have. They know what sounds good, and they know that a good reference monitor can help them make a good performance great.

Core 59 – the flagship of our high-end professional reference monitor series – is that monitor. This three-way speaker features uncompromising class-D amplification, cutting-edge digital signal processing, a super-inert 32mm-thick baffle and a flat bass response down to 42Hz with -6dB at 36Hz.

It’s a serious system designed for serious audio professionals. Core 59 has been made for the highest-demand environments that recording engineers, mixers, producers, and editors work in – and has been specifically designed to solve many of the monitoring issues that career professionals face every day.

Listen all day (and all night) without fatigue


Listener fatigue is the thorn in the side of every studio engineer. Once it sets in, you’re done for the day. Core 59’s all-new Esotar Pro tweeter has been created to keep fatigue at bay so you won’t be finished before the mix is.

We’ve long been known for our sweet-sounding soft-dome tweeters. They provide hours of pinpoint imaging and detail without the tiring quality that’s common to other designs. The Esotar Pro builds on this heritage with the ingenious Hexis device. It’s an inner dome that sits just behind the diaphragm and optimises airflow, smooths the frequency response and eliminates unwanted internal resonances. The result is outstanding imaging, transient detail, and effortless high frequency response.

The speaker’s 5in midrange driver provides staggering detail. It uses our proprietary MSP (Magnesium Silicate Polymer) material in its cone for the best combination of lightness, stiffness and damping and, coupled with an aluminium voice-coil, has an incredibly fast response and authoritative control from its neodymium magnet system. With crossover points at 312Hz and 5.1kHz, Core 59 delivers so much more of the critical vocal range in one driver than typical designs, ensuring your mix decisions on vocal balances and dialogue subtleties are made with total confidence.

Core 59’s new bass driver has emerged from over 18 months of intensive study into subwoofer driver technology, including our 18S subwoofer, which dives all the way down to 16Hz. The outcome of that research is a new copper voice-coil and glass-fibre former, pushed by ceramic magnets and a 500W class-D Pascal amplifier. It gives the 9in long-excursion woofer even more grip on the bottom without sacrificing a deep frequency response.

And because each driver is handmade in our factory in Denmark (we produce 1.4 million drivers each year for our home hi-fi, custom-install, in-car and pro-studio speakers), we can maintain incredible consistency. That means you can use Core monitors in multiple studios and have them all sound and perform at the same high level – everything you need to hear, everywhere you go. Should you need to replace a driver, you can either do it yourself and calibrate it to within 0.2dB as on the AIR series, or have your service centre do a full factory-level calibration.

Ultra-flexible positioning and the Orbit baffle


When we revolutionised studio monitoring with the AIR series, we also revolutionised speaker positioning. Literally. AIR made it possible to use a three-way speaker in multiple orientations without compromising the midrange driver and tweeter’s phase response by using sealed midrange and tweeter assemblies that can be rotated in the cabinet.

Core 59’s Orbit baffle rotates too, so you can use it in left, right, or centre-channel orientation. You can even position the woofer above the tweeter/midrange assembly to accommodate placement in front of a console in an LCR array.

Since every application is unique and monitors may need to be placed in a variety of environments – on their sides, vertically or sometimes even inverted – we’ve given Core 59 indentations on all four sides. Just fit our special Dynaudio pads to protect the cabinet's finish and stabilise it on the mounting surface.

Core 59 is also compatible with standard VESA mounting brackets or our custom K&M bracket should you want to mount them on walls or the ceiling as part of a multichannel or immersive-audio reference system such as Dolby ATMOS.

Sophisticated DSP that’s surprisingly easy to use


The AIR series was famous for its advanced DSP system. But our acoustic engineers don’t believe laurels are for resting on, so they’ve constantly been looking for better and more innovative ways of doing it. That work has resulted in some great leaps in DSP sophistication – but also in the way it’s applied in everyday use. You, our users, wanted something easier to use, and that’s exactly what you get with Core – with even better performance.

Positioning is critical when installing a monitor system. That’s why each Core 59 has two DSP filter switches to address its position and boundary locations. For example, if you place the monitors on the meter bridge of a large-format mixing console, set them to ‘Desk’. This will help compensate for the first reflection created by the mixing surface. On the other hand, if you put the monitors into a purpose-built wall, setting the Position 1 filter to ‘Soffit’ will compensate for the increased bass response.

Boundary effects created by placing a monitor close to walls or a ceiling can be compensated for by adjusting the Position 2 filter between ‘Wall’ or ‘Corner’. These filters help compensate for the reflections created by the boundary walls, especially in the lower frequencies. There’s also a low-frequency 80Hz Linkwitz-Riley cutoff that can be engaged if you’re using Core 59 with a subwoofer to extend the low frequency response.

Users can also alter the overall presentation. Core 59 uses the same concept as the LYD series Sound Balance filter – a different design to typical shelving-EQ tweeter and woofer adjustments found on most active monitors. Instead of simply fine-tuning the tweeter level up or down, which will affect phase response, Core 59 uses a full-spectrum band-pass filter that tilts depending on the desired tonal response. In the ‘Dark’ setting, the entire frequency response is tilted so that 20kHz is down -1.5dB, while 20Hz is up +1.5dB. In ‘Bright’, the tilt is reversed (+1.5dB at 20kHz and -1.5dB at 20Hz). This gentle filter maintains the proper phase response between the drivers while providing the tone that meet your tastes. The changes are subtle, but often this little tweak is enough to make the sound balance just right.

Input sensitivity the way you want it


The noise-floor and signal resolution of any monitoring system is critical to its performance. Whether you’re using the analogue or digital inputs, you need to be able to control the gain staging between the monitor controller and the speaker system. We’ve provided a range of 0dBu to +24dBu to match the analogue input sensitivity to the output level. Once optimised, Core 59 processes all analogue signals at a 192kHz sampling rate and 64-bit resolution in the DSP (from the 24-bit analogue-to-digital converter) for the greatest degree of mathematical precision.

There’s a switch to determine the maximum output SPL with the greatest bit-depth in the DSP. If you want the maximum level, set this to 112dB. If you work mostly at lower levels, choose a lower SPL setting to optimise the bit-depth of the DSP for both inputs.

When using the AES digital inputs, you must determine which channel (left or right) of the AES stream is used for that monitor. Core 59’s DSP operates at the incoming sample rate and either locks to the digital audio clock or word clock to maintain the most accurate signal possible.

The beating heart of your studio


We’ve designed Core 59 for you. We’ve designed it to be used however and wherever you need it – whether that’s for near-field, mid-field or main monitoring, or in soffit-mounted set-ups. It’s made for music mastering, mixing, and recording; theatrical re-mixing; editorial and sound design for games or anywhere else you need an uncompromising critical monitoring system.

Core 59 is ready to be installed in high-SPL immersive audio and other multi-channel environments with both analogue and digital connectivity, DSP controlled acoustic response, and versatile positioning. That means complete tonal consistency whatever your monitoring needs.

It really does give you everything you need to hear.

Specifications:

  • Powered:    Yes
  • Power Configuration:    Tri-amped
  • LF Driver Size:    9.5"
  • LF Driver Type:    Glass-fibre cone, Copper voice coil
  • MF Driver Size:    5"
  • MF Driver Type:    Magnesium Silicate Polymer cone, Aluminum voice-coil
  • HF Driver Size:    1" tweeter
  • HF Driver Type:    Soft-domed
  • LF Driver Power Amp:    500W
  • MF Driver Power Amp:    500W
  • HF Driver Power Amp:    150W
  • Total Power:    1150W
  • Frequency Response:    42Hz-21kHz ±3dB, (36Hz-24kHz -6dB)
  • Crossover Frequency:    312.5Hz (LF/MF), 5100Hz (MF/HF)
  • Maximum Peak SPL:    112 dB SPL @ 1m
  • Input Types:    1 x XLR, 1 x XLR (AES/EBU)
  • Output Types:    1 x XLR (direct out)
  • USB:    1 x Type B
  • Enclosure Type:    Ported
  • Enclosure Material:    Reinforced MDF
  • Height:    21.6"
  • Width:    11"
  • Depth:    15"
  • Weight:    54.2 lbs.
Studio Reference Monitor with 1" Esotar Pro tweeter, 5" midrange, 9.5" woofer
₹269,900.00
₹299,500.00
Core 7 (Single) ( Core 7 (Single) )
  • Studio Reference Monitor with 1"Esotar Pro, 7" mid/woofer
  • Class D Pascal bi-amplification HF 150 watts / LF 500 watts
  • Frequency response: 44Hz–21kHz ±3dB (38Hz–24kHz -6dB)
  • Core DSP optimizes imaging, balance, and bass extension
  • 24-bit sampling rate and 192kHz resolution
  • Maximum SPL: 112dB at 1m anechoic, 118dB half space
  • Analog and AES3 digital inputs 
  • Front-loaded bass reflex cabinet 
  • All drivers handcrafted by Dynaudio in Denmark
Product Description

Trust is critical in this business. Whether you’re recording a power-trio or an orchestra, mixing a solo voiceover or video-game soundtrack, or mastering a full immersive audio project (such as a Dolby ATMOS mix), you need to know that your monitors reproduce everything you need to hear – warts and all.

Core 7 has been developed alongside industry professionals with exactly this in mind. It’s the most compact model in our range of high-end professional reference monitor systems. This no-compromise two-way design features two class-D amplifiers (one 500W amp for the mid/woofer and a 150W unit for the tweeter), plus the best of modern DSP technology and a flat bass response down into to 44Hz with -6dB at 38Hz.

It’s been specifically designed and engineered to meet the challenges of high-demand environments that recording engineers, mixers, producers, and editors work in all day, every day.

Consistent performance with no fatigue

Our acoustic designers are always improving on driver design for each model – and when they wheeled Core 7 out for listening tests, you could genuinely see the pride on their faces.

Each driver unit is handmade at our factory in Denmark. And because we produce 1.4 million drivers each year for the home hi-fi, custom-install, in-car and pro-studio markets, we can ensure extreme consistency. That makes it possible to use Core monitors in multiple studios and have them all sound and perform at the same high level – giving you everything you need to hear, everywhere you use them.

We’re known for our soft-dome tweeters. They provide hours of pinpoint imaging and detail without the listener fatigue common to other designs. Core 7 builds on this heritage with the brand-new Esotar Pro tweeter – the latest breakthrough in our engineers’ obsessive attention to driver detail. New advanced manufacturing techniques and our astonishing Jupiter testing facility, have let our designers take tweeter design to a new level with the revolutionary Hexis system. Hexis optimises airflow, smooths frequency response and eliminates unwanted internal resonances. The result? Jaw-dropping imaging and transient detail, and effortless high-frequency response.

But they weren’t happy to leave it there: Core 7’s mid/woofer driver is another leap forward. We’ve taken our proprietary MSP (Magnesium Silicate Polymer) cone material along with aluminium voice coils, glass-fibre formers and advanced magnet designs to produce drivers capable of the kind of accuracy and honesty you’d never thought possible. MSP provides the best combination of lightness, stiffness and damping – making it capable of producing deep, accurate bass while also delivering natural midrange detail, all in one driver for the best imaging and point-source delivery.

Under the hood: how to set up Core 7 for your studio

The active Dynaudio AIR series was famous for its advanced digital signal processing. Our acoustic engineers continued this forward-thinking approach by taking the past 18 years’ worth of DSP innovation and applying it in a simple, easy to use system with the Core series. Make no mistake, though: under the hood is a sophisticated system that makes light work of challenging studio environments.

Positioning is critical when installing a monitor system. That’s why each Core 7 has two DSP filter switches to address its position and boundary locations. For example, if you place the monitors on the meter bridge of a large-format mixing console, set them to ‘Desk’. This will help compensate for the first reflection created by the mixing surface. On the other hand, if you put the monitors into a purpose-built wall, setting the Position 1 filter to ‘Soffit’ will compensate for the increased bass response.

Boundary effects created by placing a monitor close to walls or a ceiling can be compensated for by adjusting the Position 2 filter between ‘Wall’ or ‘Corner’. These filters help compensate for the reflections created by the boundary walls, especially in the lower frequencies. There’s also a low-frequency 80Hz Linkwitz-Riley cutoff that can be engaged if you’re using Core 7 with a subwoofer to extend the low frequency response.

Users can also alter the overall presentation. Core 7 uses the same concept as the LYD series Sound Balance filter – a different design to typical shelving-EQ tweeter and woofer adjustments found on most active monitors. Instead of simply fine-tuning the tweeter level up or down, which will affect phase response, Core 7 uses a full-spectrum band-pass filter that tilts depending on the desired tonal response. In the ‘Dark’ setting, the entire frequency response is tilted so that 20kHz is down -1.5dB, while 20Hz is up +1.5dB. In ‘Bright’, the tilt is reversed (+1.5dB at 20kHz and -1.5dB at 20Hz). This gentle filter maintains the proper phase response between the drivers while providing the tone that meet your tastes. The changes are subtle, but often this little tweak is enough to make the sound balance just right.

Input sensitivity the way you want it

The noise-floor and signal resolution of any monitoring system is critical to its performance. Whether you’re using the analogue or digital inputs, you need to be able to control the gain staging between the monitor controller and the speaker system. We’ve provided a range of 0dBu to +24dBu to match the analogue input sensitivity to the output level. Once optimised, Core 7 processes all analogue signals at a 192kHz sampling rate and 64-bit resolution in the DSP (from the 24-bit analogue-to-digital converter) for the greatest degree of mathematical precision.

There’s a switch to determine the maximum output SPL with the greatest bit-depth in the DSP. If you want the maximum level, set this to 112dB. If you work mostly at lower levels, choose a lower SPL setting to optimise the bit-depth of the DSP for both inputs.

When using the AES digital inputs, you must determine which channel (left or right) of the AES stream is used for that monitor. Core 7’s DSP operates at the incoming sample rate and either locks to the digital audio clock or word clock to maintain the most accurate signal possible.

Placement options: all of them

We’ve made sure Core 7’s cabinet is as stiff and inert as we could make it – hence the 32mm thick baffle, which contributes to its excellent linearity across the spectrum. Since every application is unique and monitors need to be placed in a variety of environments – either on their sides, vertically or sometimes even inverted with the woofer above the tweeter – we’ve designed Core 7 with indentations on all four sides. We’ve even developed special pads that can be placed in order to protect the cabinet's finish and stabilise the cabinet on the surface.

That goes for multi-channel set-ups, too: we also have custom K&M brackets to mount Core 7 in orientations suitable for surround sound, immersive audio (such as Dolby ATMOS) and other custom configurations.

One speaker, every type of studio

Core 7 is designed for maximum flexibility and performance where its compact size is desirable. This includes recording studios, edit suites, broadcast trucks, mobile facilities, broadcast and theatrical dub stages, immersive audio mixing rooms and custom installations. And because its size doesn’t diminish its performance either in frequency response or output SPL, it plays seamlessly with Core 59 monitors in calibrated multi-channel monitoring systems.

Stop second-guessing. Core delivers everything you need to hear.

Specifications:

  • Powered:    Yes
  • Power Configuration:    Bi-amped
  • LF Driver Size:    7" woofer
  • LF Driver Type:    MSP cone
  • HF Driver Size:    1" tweeter
  • HF Driver Type:    Dome
  • LF Driver Power Amp:    500W
  • HF Driver Power Amp:    150W
  • Total Power:    650W Class D
  • Frequency Response:    38Hz-24kHz
  • Crossover Frequency:    2300Hz
  • Maximum Peak SPL:    112 dB SPL @ 1m
  • Input Types:    1 x XLR (analogue), 1 x XLR (AES/EBU)
  • Output Types:    1 x XLR
  • USB:    1 x Type B
  • Enclosure Type:    Ported
  • Height:    15.5"
  • Width:    8.6"
  • Depth:    14.6"
  • Weight:    32.4 lbs.
Dynaudio Pro
₹179,900.00
₹199,700.00
Dynaudio Pro LYD 48 Pair (Black) ( LYD 48)
  •     Studio Reference Monitor with 8" woofer, 4" midrange, and 1" tweeter
  •     Designed in mirror-imaged pairs
  •     Class D tri-amplified: LF 80W, MF 50W, HF 50W
  •     Provides astonishing clarity across the frequency spectrum
  •     Delivers neutral midrange response critical for proper placement of vocals and instruments
  •     Advanced DSP lets you adjust low-frequency extension by +/-10Hz
  •     Position and Sound Balance controls for optimizing performance for any environment
  •     Expertly designed and crafted at Dynaudio's facilities in Skanderborg, Denmark
Product Description

The 3-way LYD monitor.

With its newest addition to the LYD personal reference monitor series, Dynaudio is bringing a new perspective to power and precision for producers and musicians everywhere – with unmatched accuracy at any volume level.

This 3-way near- to midfield monitor reaches eyebrow-raising levels of accuracy thanks to a new soft-dome tweeter and Dynaudio’s proprietary MSP midrange driver and woofer. Each driver is fuelled by a powerful, state-of-the-art Class-D amplifier and a full 24-bit/96kHz signal path. And, like the rest of the LYD range, it lets you fine-tune low frequency response, position and sound-balance using cutting-edge DSP.

In a 2-way design, the woofer has to work very hard to reproduce the low frequencies as well as a portion of the midrange. Another inherent disadvantage is that the crossover to the tweeter is taking place within that all-important midrange — where the vocal tracks are most vibrant, where your guitars have girth and body, and generally where mixes either shine or fall flat. Having a dedicated midrange driver (and amp) delivers sweeping benefits, including solid bass extension, improved midrange purity, lower distortion, higher SPL capability, and overall accuracy. Suitable for both nearfield and midfield applications, the value-packed Dynaudio LYD 48 will help you make better recordings.

The benefits of 3-way monitoring

If you've never worked on 3-way monitors before, you're in for a treat: increased accuracy, extended frequency response, optimized sound staging, and more. Having three dedicated drivers to handle the lows, mids, and highs; and crossover points that avoid the critical midrange frequencies; the Dynaudio LYD 48 is able to provide astonishing clarity across the frequency spectrum — and particularly in the critical midrange, an area that is often compromised by the existence of a crossover point in 2-way monitor designs. It also means that the 8" woofer, freed from the burden of midrange duties, can do what it does best: deliver beefy, extended bass response. Likewise, the tweeter can concentrate on serving up silky, extended highs. Having the most important part of the frequency spectrum — the midrange — reproduced by a separate driver gives the Dynaudio LYD 48 an incredibly neutral midrange response that's critical for proper placement of lead vocals and solo instruments in your mix.

With over three decades of experience building speaker drivers, the Danish company knows what goes into a great monitor speaker. Add to that 20-plus years of producing professional monitors for top studios, and you have a company perspective that few pro audio manufacturers can match. Dynaudio's proprietary driver technologies produce monitors that are neutral and uncolored. This silky clarity, in combination with amazing dynamic capabilities, deliver monitors that let you work marathon sessions without ear fatigue — all while producing superior-sounding results.

Specifications:

  • Frequency Response:     32Hz - 21kHz
  • Max SPL (1m, pair):     112dB
  • Principle:     Bass reflex
  • Crossover Frequencies:     490Hz/ 5600Hz
  • Tweeter:     28mm Soft dome
  • Midrange:     4"
  • Woofer:     8''
  • Amplifier:     HF 50W / MF 50W / LF 80W Class-D
  • I/O Connectors:     XLR Balanced: RCA Unbalanced
  • Dimensions:     369 x 234 x 328mm
  • Weight:     10,55Kg
Dynaudio
₹219,800.00
₹245,000.00
LYD 48 Pair (White/Black) ( LYD 48 Pair (White/Black))
Max SPL (1m, pair):         
                       112dB
Principle:
                  Bass reflex       
Crossover
Frequencies:
                 460Hz/ 5.5kHz
Tweeter:
                1in soft dome
Midrange:
              4in
Woofer:
             8in
Dimensions (W x H x D):
               369 x 234 x 328mm
Weight:
     
         12kg
Sensitivity (85dB @ 1m, free field):
 
+6dB:                           50mV
0db  :                         100 mV

-6db :                         200 mV

Amplifier:
            Power (Tweeter/Midrange/Woofer):                50W/50W/80W
Type:             
          Class DPower consumption standby:                <0.5W
          Power consumption max.:                               100W
          Input voltage:                                                90 - 264V AC, 50 - 60Hz
          Inputs:                                                          XLR balanced/RCA unbalanced
          Outputs:                                                        N/A
Frequency response -6dB limits:                                                           
          Bass extension +10Hz:                                   60Hz - 21kHz
          Bass extension 0Hz:                                       50Hz - 21kHz
          Bass extension -10Hz:                                    40Hz - 21kHz
          Free field frequency response:                         50Hz - 19kHz
Frequency response -10dB limits:
          Bass extension +10Hz:                                   52Hz - 24kHz
          Bass extension 0Hz:                                       42Hz - 24kHz
           Bass extension -10Hz:                                   32Hz - 24kHz
Dynaudio Pro
₹219,800.00
₹245,000.00
LYD 5 Pair (Black) ( LYD 5 Pair (Black) )
  • Nearfield Monitor with 5" Woofer
  • Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
  • Bass extension settings to extend or curtail the low end frequency response
  • Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
  • Sound balance to influence the overall response of the speaker
  • Handmade in Denmark
Product Description

The LYD 5 is Dynaudio's premium small-format near-field monitor. With its low volume precision, LYD is the perfect fit for smaller setups and home studios. LYD uses lightweight aluminium wire and voice coils in its handmade drive units, along with a state-of-the-art Class-D amplifier with a 96 kHz / 24bit signal path and DSP used just right to provide outstanding performance.

The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.

Design Principles
Dynaudio monitors are designed to speak the truth so you get exactly what you need: an exact reproduction of your mix. Great mixing derives from attention to detail while striving for a final mix that goes way beyond the sum of its parts. We believe that the same principle applies when designing ultimate monitors.

Utmost care in selection of materials and production combined with the industry's most thorough and extensive testing program allow our monitors to achieve 100 percent consistency - not just between different pairs, but also when crossing pairs or relying on pairs in different locations.

And due to our unique driver technology our monitors are neutral and uncolored. The smooth clarity in combination with the outstanding dynamic capabilities of our monitors ensure that you can work long hours without ear fatigue.

Specifications:

  • Frequency Response - 50 Hz - 22 kHz
  • Max SPL 1m, pair (IEC Short Term): 106 dB
  • Principle: Bass reflex
  • Crossover Freq.: 5200 Hz
  • Tweeter: 28mm Soft Dome
  • Woofer: 5''
  • Amplifier: HF 50W/LF 50W Class-D
  • I/O Connectors: XLR Balanced: RCA Unbalanced
  • Dimensions (W x H x D): 170 x 260 x 211mm
  • Weight: 5.7kg


Dynaudio Pro
₹111,800.00
₹123,800.00
LYD 5 Pair (White/Black) (LYD 5)
  • Nearfield Monitor with 5" Woofer
  • Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
  • Bass extension settings to extend or curtail the low end frequency response
  • Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
  • Sound balance to influence the overall response of the speaker
  • Handmade in Denmark
Product Description

The LYD 5 is Dynaudio's premium small-format near-field monitor. With its low volume precision, LYD is the perfect fit for smaller setups and home studios. LYD uses lightweight aluminium wire and voice coils in its handmade drive units, along with a state-of-the-art Class-D amplifier with a 96 kHz / 24bit signal path and DSP used just right to provide outstanding performance.

The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.

Design Principles
Dynaudio monitors are designed to speak the truth so you get exactly what you need: an exact reproduction of your mix. Great mixing derives from attention to detail while striving for a final mix that goes way beyond the sum of its parts. We believe that the same principle applies when designing ultimate monitors.

Utmost care in selection of materials and production combined with the industry's most thorough and extensive testing program allow our monitors to achieve 100 percent consistency - not just between different pairs, but also when crossing pairs or relying on pairs in different locations.

And due to our unique driver technology our monitors are neutral and uncolored. The smooth clarity in combination with the outstanding dynamic capabilities of our monitors ensure that you can work long hours without ear fatigue.

Specifications:

  • Frequency Response - 50 Hz - 22 kHz
  • Max SPL 1m, pair (IEC Short Term): 106 dB
  • Principle: Bass reflex
  • Crossover Freq.: 5200 Hz
  • Tweeter: 28mm Soft Dome
  • Woofer: 5''
  • Amplifier: HF 50W/LF 50W Class-D
  • I/O Connectors: XLR Balanced: RCA Unbalanced
  • Dimensions (W x H x D): 170 x 260 x 211mm
  • Weight: 5.7kg


Dynaudio Pro
₹111,800.00
₹123,800.00
Dynaudio Pro LYD 7 Pair (Black) (Dynaudio Pro LYD 7 Pair (Black) )
  • Nearfield Monitor with 7" Woofer
  • Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
  • Bass extension settings to extend or curtail the low end frequency response
  • Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
  • Sound balance to influence the overall response of the speaker
  • Handmade in Denmark
Product Description

The new LYD 7 uses advanced Digital Signal Processing to extend or curtail the low-frequency response by 10 Hz where need while both Position and Sound Balance ensure better performance in any environment.

Compared to its smaller sized sibling, the LYD 7's larger woofer helps extends bass response.

A ferrit magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.

Design Principles
Dynaudio monitors are designed to speak the truth so you get exactly what you need: an exact reproduction of your mix. Great mixing derives from attention to detail while striving for a final mix that goes way beyond the sum of its parts. We believe that the same principle applies when designing ultimate monitors.

Utmost care in selection of materials and production combined with the industry's most thorough and extensive testing program allow our monitors to achieve 100 percent consistency - not just between different pairs, but also when crossing pairs or relying on pairs in different locations.

And due to our unique driver technology our monitors are neutral and uncolored. The smooth clarity in combination with the outstanding dynamic capabilities of our monitors ensure that you can work long hours without ear fatigue.

Specifications:

  • Frequency Response: 45 Hz - 22 kHz
  • Max SPL (1m, pair): 109dB
  • Principle: Bass reflex
  • Crossover Freq.: 4300 Hz
  • Tweeter: 28 mm Soft dome
  • Woofer: 7''
  • Amplifier: HF 50W/LF 50W Class-D
  • Dimensions (W x H x D): 186 x 320 x 296 mm
  • Weight: 8 kg
  • I/O Connectors: XLR Balanced: RCA Unbalanced
Dynaudio
₹135,000.00
₹151,000.00
LYD 7 Pair (White/Black) ( LYD 7)
  • Nearfield Monitor with 7" Woofer
  • Bi-amped speaker design with 2 x 50W and state-of-the-art Class-D amplification
  • Bass extension settings to extend or curtail the low end frequency response
  • Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
  • Sound balance to influence the overall response of the speaker
  • Handmade in Denmark
Product Description

The new LYD 7 uses advanced Digital Signal Processing to extend or curtail the low-frequency response by 10 Hz where need while both Position and Sound Balance ensure better performance in any environment.

Compared to its smaller sized sibling, the LYD 7's larger woofer helps extends bass response.

A ferrit magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.

Design Principles
Dynaudio monitors are designed to speak the truth so you get exactly what you need: an exact reproduction of your mix. Great mixing derives from attention to detail while striving for a final mix that goes way beyond the sum of its parts. We believe that the same principle applies when designing ultimate monitors.

Utmost care in selection of materials and production combined with the industry's most thorough and extensive testing program allow our monitors to achieve 100 percent consistency - not just between different pairs, but also when crossing pairs or relying on pairs in different locations.

And due to our unique driver technology our monitors are neutral and uncolored. The smooth clarity in combination with the outstanding dynamic capabilities of our monitors ensure that you can work long hours without ear fatigue.

Specifications:

  • Frequency Response: 45 Hz - 22 kHz
  • Max SPL (1m, pair): 109dB
  • Principle: Bass reflex
  • Crossover Freq.: 4300 Hz
  • Tweeter: 28 mm Soft dome
  • Woofer: 7''
  • Amplifier: HF 50W/LF 50W Class-D
  • Dimensions (W x H x D): 186 x 320 x 296 mm
  • Weight: 8 kg
  • I/O Connectors: XLR Balanced: RCA Unbalanced



Dynaudio Pro
₹135,000.00
₹151,000.00
LYD 8 Pair (Black) ( LYD 8)
  • Nearfield Monitor with 8" Woofer
  • Bi-amped speaker design with 50W HF/80W LF and state-of-the-art Class-D amplification
  • Bass extension setings to extend or curtail the low end frequency response
  • Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
  • Sound balance to influence the overall response of the speaker
  • Handmade in Denmark

Specifications:

  • Frequency Response: 45 Hz - 22 kHz
  • Max SPL (1m, pair): 112 dB
  • Principle: Bass reflex
  • Crossover Frequencies: 3900 Hz
  • Tweeter: 28mm Soft dome
  • Woofer: 8''
  • Amplifier: HF 50W/LF 80W Class-D
  • I/O Connectors: XLR Balanced: RCA Unbalanced
  • Dimensions: 234 x 369 x 328 mm
  • Weight: 10.2 kg

Product Description

   
         The LYD series is a redefinition of our previous professional products, and LYD 8 is the biggest of them all. With its 8'' MSP woofer and advanced DSP, the LYD 8 provides outstanding performance and a low-end precision you won't believe. Perfect for smaller studios and home setups.

      A ferrit magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.

  Design Principles
            Dynaudio monitors are designed to speak the truth so you get exactly what you need: an exact reproduction of your mix. Great mixing derives from attention to detail while striving for a final mix that goes way beyond the sum of its parts. We believe that the same principle applies when designing ultimate monitors. 

          Utmost care in selection of materials and production combined with the industry's most thorough and extensive testing program allow our monitors to achieve 100 percent consistency - not just between different pairs, but also when crossing pairs or relying on pairs in different locations.
      
      And due to our unique driver technology our monitors are neutral and uncolored. The smooth clarity in combination with the outstanding dynamic capabilities of our monitors ensure that you can work long hours without ear fatigue.

Dynaudio Pro
₹159,800.00
₹177,800.00
Dynaudio Pro LYD 8 Pair (White/Black) (LYD 8 Pair)
  • Nearfield Monitor with 8" Woofer
  • Bi-amped speaker design with 50W HF/80W LF and state-of-the-art Class-D amplification
  • Bass extension setings to extend or curtail the low end frequency response
  • Two different tunings: one for free standing and one designed for speakers within 50 cm of wall
  • Sound balance to influence the overall response of the speaker
  • Handmade in Denmark
Product Description

The LYD series is a redefinition of our previous professional products, and LYD 8 is the biggest of them all. With its 8'' MSP woofer and advanced DSP, the LYD 8 provides outstanding performance and a low-end precision you won't believe. Perfect for smaller studios and home setups. 

A ferrit magnet system with vented pole piece for accurate driver control. Large diameter voice coil surrounds the magnet for superior linearity. The aluminium voice coil and wire are low mass so its transient response is quick and accurate. To ensure the ideal mix between stiffness, weight, and dampening for unrivalled accuracy, we mould the diaphragm and dust cap in one piece with our proprietary Magnesium Silicate Polymer.

Design Principles
Dynaudio monitors are designed to speak the truth so you get exactly what you need: an exact reproduction of your mix. Great mixing derives from attention to detail while striving for a final mix that goes way beyond the sum of its parts. We believe that the same principle applies when designing ultimate monitors.

Utmost care in selection of materials and production combined with the industry's most thorough and extensive testing program allow our monitors to achieve 100 percent consistency - not just between different pairs, but also when crossing pairs or relying on pairs in different locations.

And due to our unique driver technology our monitors are neutral and uncolored. The smooth clarity in combination with the outstanding dynamic capabilities of our monitors ensure that you can work long hours without ear fatigue.

Specifications:

  • Frequency Response: 45 Hz - 22 kHz
  • Max SPL (1m, pair): 112 dB
  • Principle: Bass reflex
  • Crossover Frequencies: 3900 Hz
  • Tweeter: 28mm Soft dome
  • Woofer: 8''
  • Amplifier: HF 50W/LF 80W Class-D
  • I/O Connectors: XLR Balanced: RCA Unbalanced
  • Dimensions: 234 x 369 x 328 mm
  • Weight: 10.2 kg
Dynaudio
₹159,800.00
₹177,800.00
Per Page      1 - 12 of 12
  • 1