Latest ProductsSee New Products

2-way bass-reflex bi-amplified nearfield studio monitor
₹48,000.00
16-channel Analog Automation System with Digital Control
₹148,724.00
Stereo/Dual Mono Bus Compressor with Digital Control
₹231,395.00
₹242,648.00
alt=
1-channel Tube Compressor, with Side-chain Highpass Filter and Stereo Link Capability
₹128,056.00

Miktek

Sort By:  
Small-diaphragm Condenser Microphone
₹53,580.00
Matched Pair of Small-diaphragm with Mic Clips, Shockmounts, Windscreens, Stereo Bar Set, Wood Presentation Case, and Aluminum Carrying Case
₹114,822.00
Large-diaphragm Tube Condenser Microphone
₹77,937.00
Large-diaphragm Tube Condenser Microphone
₹116,908.00
4-Piece Dynamic Drum Mic Kit
₹46,428.00
4-Piece Dynamic Drum Mic Kit
₹56,530.00
7-Piece Dynamic Drum Mic Kit
₹126,163.00
MikTek C5 (MikTek C5)
C5 small diaphragm cardioid pencil condenser

The Miktek C5 pencil condenser provides discerning engineers with a valuable new tool for the critical recording of acoustic instruments. The C5, fitted with our MK5a, 0.5-inch cardioid capsule, produces a super-linear, full-bodied response. The capsule employs a 5-micron tensioned Mylar diaphragm, on which a 0.4-micron layer of evaporated gold is applied. Tight tolerances and special attention to precise machining of the backplate, and acoustical porting, produces an off-axis response that ensures the accuracy of the microphone. Also included is the MK5b omnidirectional capsule.

The C5’s head amplifier has been designed around the AMI T5 transformer and, together with the implementation of high quality components including hand-selected transistors, offers a sweet response reminiscent of the iconic classic mics of the past. The Miktek C5 is perfect for recording acoustic instruments including violin, acoustic guitar, mandolin, dobro, brass, woodwind, and piano. The C5 produces excellent results on drums as overheads or hi-hat mics.

The Miktek C5 is hand built using components from the US, Europe and Asia, and is tested and packaged in Nashville, Tennessee, USA. Each microphone includes its serialized frequency response graph created during final testing.


The C5 is available as a single instrument packaged with a mic clip and wooden presentation box, or as a matched pair packaged with two clips in a wooden box and set inside an aluminum case. Matched-pair accessories include two shock mounts, windscreens and a stereo bar.


Specifications:

  • MK5a 0.5-inch Cardioid Capsule with 5-micron Mylar, Evaporated Gold Diaphragm
  • MK5b Omni Capsule included
  • AMI T5 Transformer
  • Hand-selected Transistors
  • Individual serialized Frequency Response Graph
  • Available as a single mic in a wood Presentation Case with Mic Clip; or
  • Available as a stereo matched pair with wood Presentation Case with Mic Clips, Shock-mounts, Windscreens, Stereo Bar Set, in a rugged aluminum carrying case

Miktek C5 Microphone Specifications

  • Type: Small diaphram condenser
  • Polar Pattern: Cardioid, Omni
  • Frequency Response: 20~20000Hz
  • Equivalent Noise Level: 17dB
  • Dynamic Range: 109dB
  • Signal to Noise Ratio: 77dB
  • Max. SPL: 126dB
  • Power Supply: 48V phantom
  • Power Consumption: 0.5mA

Miktek C5 Microphone Includes

  • Miktek C5 Microphone
  • Cardioid Capsule
  • Omni Capsule
  • Mic Clip
  • Wooden Presentation Box


Small-diaphragm Condenser Microphone
₹53,580.00
MikTek C5 Matched Pair (MikTek C5 Matched Pair)

About Miktek C5MP

The Miktek C5MP Small Diaphragm Condenser Microphones are a matched pair of C5 microphones. The C5 is hand crafted, features a super-linear, full-bodied frequency response and is intended for instrument and vocal capturing during recording sessions or live sound reinforcement applications. The C5 features Miktek's MK5a 0.5-inch capsule with 5-micron mylar evaporated gold diaphragm. Its cardioid polar pattern accurately rejects off-axis noise, ambiance and feedback. Its AMI T5 transformer ensures pristine audio throughput without noise. The C5 is an ideal solution for amplifier cabinets, acoustic guitars, brass, strings, drums, percussion, stereo capturing (with multiple microphones) and more.

The C5’s head amplifier has been designed around the AMI T5 transformer and, together with the implementation of high quality components including hand-selected transistors, offers a sweet response reminiscent of the iconic classic mics of the past. The Miktek C5 is perfect for recording acoustic instruments including violin, acoustic guitar, mandolin, dobro, brass, woodwind, and piano. The C5 produces excellent results on drums as overheads or hi-hat mics.

The Miktek C5 is hand built using components from the US, Europe and Asia, and is tested and packaged in Nashville, Tennessee, USA. Each microphone includes its serialized frequency response graph created during final testing.

The C5 is available as a single instrument packaged with a mic clip and wooden presentation box, or as a matched pair packaged with two clips in a wooden box and set inside an aluminum case. Matched-pair accessories include two shock mounts, windscreens and a stereo bar.

Specifications

  • MK5a 0.5-inch Cardioid Capsule with 5-micron Mylar, Evaporated Gold Diaphragm

  • AMI T5 Transformer

  • Hand-selected Transistors

  • Individual serialized Frequency Response Graph

  • Available as a single mic in a wood Presentation Case with Mic Clip

  • Type . . . . . . . . . . . . . . Small diaphram Condenser

  • Polar Pattern . . . . . . . . . Cardioid

  • Frequency Response . . . . 20~20000Hz

  • Sensitivity . . . . . . . . . . - 32.4 dBV/Pa

  • Equivalent Noise Level . . . 17dB

  • Dynamic range . . . . . . . 109dB

  • S/N Ratio . . . . . . . . . . . 77dB

  • Max. SPL . . . . . . . . . . . 126dB

  • Power Supply . . . . . . . . 48V phantom

  • Power Consumption . . . . 0.5mA

Matched Pair of Small-diaphragm with Mic Clips, Shockmounts, Windscreens, Stereo Bar Set, Wood Presentation Case, and Aluminum Carrying Case
₹114,822.00
MikTek CV3 (MikTek CV3)

CV3 Nine Pattern Tube Condenser Microphone

The Miktek CV3 is a large-diaphragm tube condenser ­microphone offering nine pick-up patterns. The CV3’s sound is truly large and produces a musical response that will please artists, producers and most seasoned engineers alike. The bottom end is big, warm and tight, with mids that are present and even, along with a high frequency response that’s sweet and airy. The CV3 is ideal for recording single vocalists, and perfect for acoustic instruments, groups of vocals, piano, string ensembles, winds, overheads on a drum kit or as ­ambient room mics.



The CV3 utilizes the MK9 capsule developed by Miktek. This unique capsule features dual 1-inch diaphragms manufactured using 5-micron Mylar with a 0.4-micron layer of evaporated gold, which is precisely tensioned, mounted to carefully-tuned backplates, and set back-to-back to create the final capsule. Tight tolerances and special attention to precise machining of the backplate produce a linear off-axis response that ensures the accuracy of the microphone.


The CV3’s head amplifier employs exotic discrete components together with a hand selected subminiature pentode vacuum tube, in which the high-voltage circuit has been uniquely implemented, the CV3 challenges the performance of the best-in-class industry standards without hesitation.

The output stage features a custom AMI transformer, which offers a classic sound and an extended low frequency response found in the earliest versions of the most famous vintage tube microphones.

The Miktek CV3 is hand assembled, tested and packaged in Nashville, Tennessee, USA using components from the US, Europe and Asia. Each microphone includes its serialized ­frequency response graph created during final testing.The CV3 is packaged with its swivel mount in a wooden box, which is set inside an aluminum case with the included power supply unit, 7-pin XLR cable and shock mount.

Specifications:

  • Classic Large-diaphragm Tube Condenser Design
  • MK9 Dual 1-inch Capsule with 5-micron Mylar, Evaporated Gold Diaphragms
  • Nine Selectable Pick-up Patterns
  • Custom Designed Made in USA Miktek Output Transformer
  • Hand Selected Subminiature Pentode Vacuum Tube
  • Individual serialized Frequency Response Graph
  • External Power Supply and 7-pin XLR Cable
  • Wood Presentation Case with swivel-mount, shock-mount and rugged aluminum Carrying Case
Large-diaphragm Tube Condenser Microphone
₹77,937.00
MikTek CV4 (MikTek CV4)

CV4 large diaphragm multi-pattern tube condenser

The Miktek CV4 is a large-diaphragm tube condenser microphone offering nine pick-up patterns. The CV4’s sound is truly large and produces a musical response that will please artists, producers and most seasoned engineers alike. The bottom end is big, warm and tight, with mids that are present and even, along with a high frequency response that’s sweet and airy. The CV4 is ideal for recording single vocalists, and perfect for acoustic instruments, groups of vocals, piano, string ensembles, winds, overheads on a drum kit or as ­ambient room mics.

The CV4 utilizes the MK9 capsule developed by Miktek. This unique capsule features dual 1-inch diaphragms manufactured using 5-micron Mylar with a 0.4-micron layer of evaporated gold, which is precisely tensioned, mounted to carefully-tuned backplates, and set back-to-back to create the final capsule. Tight tolerances and special attention to precise machining of the backplate produce a linear off-axis response that ensures the accuracy of the microphone

The Miktek CV4 is hand-built using components from the US, Europe and Asia, and is tested and packaged in Nashville, Tennessee, USA. Each microphone includes its serialized frequency response graph created during final testing.

The CV4 utilizes the MK9 capsule developed by Miktek. This unique capsule features dual 1-inch diaphragms manufactured using 5-micron Mylar with a 0.4-micron layer of evaporated gold, which is precisely tensioned, mounted to carefully-tuned backplates, and set back-to-back to create the final capsule. Tight tolerances and special attention to precise machining of the backplate produce a linear off-axis response that ensures the accuracy of the microphone
The Miktek CV4 is hand-built using components from the US, Europe and Asia, and is tested and packaged in Nashville, Tennessee, USA. Each microphone includes its serialized frequency response graph created during final testing.

Together with an original NOS (new-old-stock) Telefunken EF800 tube, in which the high-voltage circuit has been uniquely implemented, the microphone challenges the performance of the best-in-class industry standards without hesitation.

Following the head amplifier, the heart and soul of the CV4’s is the massive AMI BT4 output transformer, which offers a classic sound and an extended low frequency response found in the earliest versions of the most famous vintage tube microphones.

Specifications:

  • Classic Large-diaphragm Tube Condenser Design
  • MK9 Dual 1-inch Capsule with 5-micron Mylar, Evaporated Gold Diaphragms
  • Nine Selectable Pick-up Patterns
  • AMI BT4 Transformer
  • Original NOS Telefunken EF800 Tube
  • Individual serialized Frequency Response Graph
  • External Power Supply and 7-pin XLR Cable
  • Wood Presentation Case with swivel-mount, shock-mount and rugged aluminum Carrying Case.
Large-diaphragm Tube Condenser Microphone
₹116,908.00
MikTek PMD4 (MikTek PMD4)

PMD4 4-Piece Dynamic Drum Mic Kit

The house lights go out. The crowd is roaring while you step behind your kit. You’re ready to give the energetic performance you painfully rehearsed and prepared weeks for. You took a lot of care when you put together your kit. How will your drums sound to the audience? Will you drums cut through the monitor mix? – No worries.

Experience Miktek PMD4 Performance Series Drum Microphones. You put a lot of time and money into selecting shells, hardware, cymbals and tuning your kit just right. The hard work and sweat you put into every rehearsal enables you to give a better than average performance, so you demand better than average microphones to reproduce the sound of your drum set. Miktek Performance Series drum microphones offer way above average sound and build quality that will impress the most discriminating engineers and drummers alike. Featuring cutting edge capsule design perfectly matched to Miktek’s proprietary output transformers; the Performance Series Microphones produce a modern, yet truly classic sound you not only hear, but you feel, too.

stevesinatra

The Miktek PMD4 drum mic kit brings the sound of two great microphones together for drummers, on the stage and in the studio. Featuring three PM10 snare/tom mics, three LRM100 rim mount clips, along with the PM11 kick drum mic all packed in a sturdy road case, the PMD4 is a perfect foundation for miking any kit. The PM10 and PM11 are super cardioid, dynamic microphones featuring custom designed, neodymium capsule elements offering extremely clear and articulate sound reproduction. The capsules are then matched with a proprietary boutique transformer made in the US by AMI, and finally, the microphones are assembled and tested in Nashville TN USA. Simply put, we use better components to achieve a higher level of sound quality. The PM10’s frequency response is full and robust and has been contoured to snare and tom-toms. Plus, the capsule’s unique labyrinth design provides ultimate rear rejection and maximum gain before feedback, so your snare and toms cut though the PA. The PM10 is an excellent choice for conga, timbale, hand-drums and other percussion as well. With high SPL capabilities the PM10 can easily accommodate the loudest drummers and can even be used to mic up loud guitar amps and brass instruments. The PM10 can be set upon a traditional mic stand, or use the included LRM100 Lever Rim Mount clip to quickly attached the microphone to your snare or tom rim.


tonytccoleman

The PM11’s frequency response is full and robust and is perfect for reinforcing bass drums in live sound applications. The P11’s capsule features a unique labyrinth design provides ultimate rear rejection and maximum gain before feedback, so your kick, or kicks, cut though the PA with clarity and distinction. The deep and honest response makes the PM11 kick drum mic ideal for studio applications. With high SPL capabilities the PM11 can easily accommodate the loudest drummers and can even be used to mic up loud bass guitar amps. The PM10 and PM11’s steel grilles and die cast bodies ensure durability and reliability night after night. Their ultra sleek, silver finish with stainless steel and black appointments make the PM10 and PM11 attractive complements to any drum kit. The Miktek PMD4 drum microphone kit will reproduce the sound of your bass drum faithfully, delivering a solid foundation to any live or studio performance.

Specifications:

  • Dynamic Drum Microphone Set
  • Incudes 1 PM11 Kick Drum mic and 3 PM10 Snare/Tom Mics
  • Lever lock Rim Mount Tom Clips and Standard Mic Clips
  • Packaged with in a rugged aluminum carrying case
  • Three year warranty
4-Piece Dynamic Drum Mic Kit
₹46,428.00
MikTek PMD5 (MikTek PMD5)
PMD5 5-Piece Dynamic Drum Mic Kit
The house lights go out. The crowd is roaring while you step behind your kit. You’re ready to give the energetic performance you painfully rehearsed and prepared weeks for. You took a lot of care when you put together your kit. How will your drums sound to the audience? Will you drums cut through the monitor mix? – No worries.
Experience Miktek PMD5 Performance Series Drum Microphones. You put a lot of time and money into selecting shells, hardware, cymbals and tuning your kit just right. The hard work and sweat you put into every rehearsal enables you to give a better than average performance, so you demand better than average microphones to reproduce the sound of your drum set. Miktek Performance Series drum microphones offer way above average sound and build quality that will impress the most discriminating engineers and drummers alike. Featuring cutting edge capsule design perfectly matched to Miktek’s proprietary output transformers; the Performance Series Microphones produce a modern, yet truly classic sound you not only hear, but you feel, too.
eric-velezcurtis-rodriguez

The Miktek PMD5 drum mic kit brings the sound of two great microphones together for drummers, on the stage and in the studio. Featuring four PM10 snare/tom mics, four LRM100 rim mount clips, along with the PM11 kick drum mic all packed in a sturdy road case, the PMD5 is a perfect foundation for miking any kit. The PM10 and PM11 are super cardioid, dynamic microphones featuring custom designed, neodymium capsule elements offering extremely clear and articulate sound reproduction. The capsules are then matched with a proprietary boutique transformer made in the US by AMI, and finally, the microphones are assembled and tested in Nashville TN USA. Simply put, we use better components to achieve a higher level of sound quality.


The PM10’s frequency response is full and robust and has been contoured to snare and tom-toms. Plus, the capsule’s unique labyrinth design provides ultimate rear rejection and maximum gain before feedback, so your snare and toms cut though the PA. The PM10 is an excellent choice for conga, timbale, hand-drums and other percussion as well. With high SPL capabilities the PM10 can easily accommodate the loudest drummers and can even be used to mic up loud guitar amps and brass instruments. The PM10 can be set upon a traditional mic stand, or use the included LRM100 Lever Rim Mount clip to quickly attached the microphone to your snare or tom rim.


tonytccoleman

The PM11’s frequency response is full and robust and is perfect for reinforcing bass drums in live sound applications. The P11’s capsule features a unique labyrinth design provides ultimate rear rejection and maximum gain before feedback, so your kick, or kicks, cut though the PA with clarity and distinction. The deep and honest response makes the PM11 kick drum mic ideal for studio applications. With high SPL capabilities the PM11 can easily accommodate the loudest drummers and can even be used to mic up loud bass guitar amps.


The PM10 and PM11’s steel grilles and die cast bodies ensure durability and reliability night after night. Their ultra sleek, silver finish with stainless steel and black appointments make the PM10 and PM11 attractive complements to any drum kit. The Miktek PMD5 drum microphone kit will reproduce the sound of your bass drum faithfully, delivering a solid foundation to any live or studio performance.

Specifications:

  • Dynamic Drum Microphone Set
  • Incudes 1 PM11 Kick Drum mic and 4 PM10 
 Snare/Tom Mics
  • Lever lock Rim Mount Tom Clips and Standard Mic Clips
  • Packaged with in a rugged aluminum carrying case
  • Three year warranty



4-Piece Dynamic Drum Mic Kit
₹56,530.00
MikTek PMD7 (MikTek PMD7)
PMD7 7-Piece Dynamic Drum Mic Kit
 
The house lights go out. The crowd is roaring while you step behind your kit. You’re ready to give the energetic performance you painfully rehearsed and prepared weeks for. You took a lot of care when you put together your kit. How will your drums sound to the audience? Will you drums cut through the monitor mix? – No worries.
Experience Miktek PMD7 Performance Series Drum Microphones. You put a lot of time and money into selecting shells, hardware, cymbals and tuning your kit just right. The hard work and sweat you put into every rehearsal enables you to give a better than average performance, so you demand better than average microphones to reproduce the sound of your drum set. Miktek Performance Series drum microphones offer way above average sound and build quality that will impress the most discriminating engineers and drummers alike. Featuring cutting edge capsule design perfectly matched to Miktek’s proprietary output transformers; the Performance Series Microphones produce a modern, yet truly classic sound you not only hear, but you feel, too.
chad_cromwell_v2

The Miktek PMD7 drum mic kit brings the sound of two great microphones together for drummers, on the stage and in the studio. Featuring four PM10 snare/tom mics, four LRM100 rim mount clips, along with the PM11 kick drum mic and 2 C5 mics all packed in a sturdy road case, the PMD7 is a perfect foundation for miking any kit. The PM10 and PM11 are super cardioid, dynamic microphones featuring custom designed, neodymium capsule elements offering extremely clear and articulate sound reproduction. The capsules are then matched with a proprietary boutique transformer made in the US by AMI, and finally, the microphones are assembled and tested in Nashville TN USA. Simply put, we use better components to achieve a higher level of sound quality.

The PM10’s frequency response is full and robust and has been contoured to snare and tom-toms. Plus, the capsule’s unique labyrinth design provides ultimate rear rejection and maximum gain before feedback, so your snare and toms cut though the PA. The PM10 is an excellent choice for conga, timbale, hand-drums and other percussion as well. With high SPL capabilities the PM10 can easily accommodate the loudest drummers and can even be used to mic up loud guitar amps and brass instruments. The PM10 can be set upon a traditional mic stand, or use the included LRM100 Lever Rim Mount clip to quickly attached the microphone to your snare or tom rim.


stevesinatra

The PM11’s frequency response is full and robust and is perfect for reinforcing bass drums in live sound applications. The P11’s capsule features a unique labyrinth design provides ultimate rear rejection and maximum gain before feedback, so your kick, or kicks, cut though the PA with clarity and distinction. The deep and honest response makes the PM11 kick drum mic ideal for studio applications. With high SPL capabilities the PM11 can easily accommodate the loudest drummers and can even be used to mic up loud bass guitar amps.

The PM10 and PM11’s steel grilles and die cast bodies ensure durability and reliability night after night. Their ultra sleek, silver finish with stainless steel and black appointments make the PM10 and PM11 attractive complements to any drum kit. The Miktek PMD7 drum microphone kit will reproduce the sound of your bass drum faithfully, delivering a solid foundation to any live or studio performance.

Specifications:

  • Dynamic Drum Microphone Set
  • Incudes 1 PM11 Kick Drum mic, 4 PM10 
 Snare/Tom Mics & 2 C5 Mics
  • Lever lock Rim Mount Tom Clips and Standard Mic Clips
  • Packaged with in a rugged aluminum carrying case
  • Three year warranty
7-Piece Dynamic Drum Mic Kit
₹126,163.00
Per Page      1 - 7 of 7
  • 1