PMC

Sort By:  
PMC's patented ATL speaker technology to create a dynamic, accurate speaker
₹0.00
XBD Extended Bass Cabinet for even more dynamic range
₹0.00
3-way ATL™ active reference monitor
₹0.00
BB6 with the XBD Extended Bass Cabinet for even more dynamic range
₹0.00
Compact reference monitors with ATL™ bass loading technology
₹0.00
Compact reference monitors with ATL™ bass loading technology
₹600,000.00
Compact reference monitors with ATL™ bass loading technology
₹0.00
Hghi-quality digital signal processing with active amplification
₹0.00
Nearfield reference monitor combines sophisticated digital signal processing
₹0.00
High resolution and detail, accurate, extended bass, consistent tonal balance at all levels
₹265,000.00
High Resolution, plug and play studio monitors
₹0.00
DSP-Controlled, Class-D powered cabinets and PMC's patented ATL
₹0.00
DB1 Gold - the finest version of the DB1 studio monitor made to date.
₹0.00
Design has a narrow front baffle that eradicates the problems of diffraction
₹0.00
PMC Loudspeakers MB3-A Three-Way Active Studio Monitors ( MB3-A Three-Way Active Studio Monitors)

PMC Loudspeakers MB3-A Three-Way Active Studio Monitors - Pair

The PMC MB3-A Studio Monitors feature PMC's patented ATL speaker technology to create a dynamic, accurate speaker (does not include stands)

The PMC Loudspeakers MB3-A Active Studio Monitor, with distinctive 12-inch Radial™ bass driver, combines the extended low-frequency response and dynamic range, nonfatiguing sound and extreme consistency and accuracy of PMC’s groundbreaking ATL™ designs with the high power and headroom of the proprietary Control 1200 and Power 2400 Class-D amplification, originally developed for the QB1-A.

The MB3-A is ideal for medium-sized recording, mixing, mastering or outside broadcast facilities, or as rear surround speakers in larger multi-channel recording studios, film soundstages, or post-production houses. The MB3-A produces an extremely smooth frequency response extending from 20Hz to 25kHz thanks to its ATL™ technology, and is also capable of producing high SPLs, to a maximum of 126dB, but without the distortion and loss of definition that are frequently associated with a device of its size, and without becoming fatiguing when used for extended periods. You won't be needing at dedicated subwoofer, as the MB3-A cabinets already cover the 20-60Hz sub-bass frequency range with ease. But, if you did want that extra bass, and sub-bass frequency, you can take a look at the MB3 XBD-A with the PMC Extended Bass Cabinet.

MB3-A Key Features

  • Type: 3-way ATL™ active reference monitor
  • Frequency response: 20Hz-25kHz
  • Power per channel: 3225W (HF 275W, MF 550W, LF 2400W)
  • Effective ATL™ length: 3 metres
  • Maximum SPL: 126dB

ATL - Advanced Transmission Line

PMC’s unique ATL™ (Advanced Transmission Line) enclosures have taken loudspeaker design to the highest level, using sophisticated cabinet construction, proprietary drive units, and patented absorption materials and techniques. The benefits are enormous compared to the relatively simple sealed and ported designs currently available elsewhere.

PMC’s innovative approach places the bass driver near one end of a long cavity ATL™ (the Advanced Transmission Line). This cavity is heavily damped with acoustic material specified carefully to absorb the upper bass and higher frequencies radiating from the rear of the bass driver. The lowest frequencies are allowed to pass down the line and emerge from the large frontal vent in the same polarity as the driver’s direct radiation, the vent acting essentially as a second bass driver. An important benefit of the approach is that the air pressure inside the cabinet, which loads the bass driver, remains consistent. This helps to maintain control of the driver over a wide frequency range and significantly reduces LF distortion. Consequently, the upper bass and mid-range detail is not masked by harmonic distortion and the result is PMC’s characteristically transparent mid-range, fast, dynamic bass, and outstanding clarity.

A further advantage of the ATL™ design approach is greater bass extension and higher SPL capability compared to typical ported or sealed designs of a similar size and driver specification. Moreover, the very consistent bass driver loading brings the welcome benefit that the frequency response remains consistent regardless of listening level, and analytical auditioning can be conducted without the need for high replay volumes to achieve an optimal bass response. This tonal consistancy at all output levels is a unique and very valuable characteristic of PMC’s Advanced Transmission Line.

Silent Cabinet

The highly engineered MB3 cabinets play an integral role in the overall superb performance of the loudspeakers. Aside from incorporating the Advanced Transmission Line itself, the enclosure has to be of a high standard to eradicate colouration and audible cabinet talk. Highly braced, resonance-damped Medite® is used with offset HF and MF drivers, radiused edges and acoustically absorbent StealthBaffles™ at the boundaries, as deployed in the QB1-A design, to minimise edge diffraction effects. These details were formulated with the aid of pioneering acoustic research and measurements undertaken by PMC in anechoic environments at the UK’s National Physical Laboratory, using opto-acoustic laser interferometry to map the soundfield and acoustic dispersion.

Sublime Highs and Mids

The MB3 features PMC’s hand-built, precision matched 34mm soft-dome HF driver and legendary 75mm fabric soft-dome mid-range driver, renowned for their natural, transparent sound and ultra-low distortion. The perforated acoustic lens on the high-frequency driver extends the treble response to well beyond the upper limit of human hearing, and controls dispersion to ensure close integration with the mid-range; the output of both drivers is meticulously combined to create an ultra-wide, stable image and entirely natural in-room response.

When designing the 75mm soft-dome, PMC’s aim was to create a driver capable of reproducing vocals, in particular, with unparallelled authenticity and transparency — but to high SPLs when required. Each handcrafted unit takes seven days to produce, and has to pass exceptionally tight matching and testing criteria. The result is an extremely clean, neutral and natural sounding mid-range driver, which means it can be used for long periods without inducing fatigue.

Deep and Meaningful Bass

High-performance bass drivers present serious engineering challenges. The power requirements, especially at higher SPLs, produce a rapid build-up of heat in poor designs. Heat is itself damaging to performance, causing power compression effects: rapid loss of efficiency, lower output levels and higher distortion. The Radial™ drivers employed in the PMC MB3 and BB6 are uniquely specified to drive ATL™ loudspeakers, using PMC’s own ultra-rigid, low-mass cone in a custom-built Radial basket. Not only is the chassis carefully constructed to conduct heat away from the driver’s voice coil, the design also vents hot air through the back of the driver assembly. In this way, heat is efficiently dissipated even when the speakers are operating at high level, ensuring that distortion is negligible, reliability stays high, and frequency response and performance remain consistent at all output levels — irrespective of how long the speakers have been in use.

Technical Specs:

Type: Active 3-way, single-cabinet reference monitor

Usable frequency response: 20Hz - 25kHz

Maximum SPL: 126dB @1metre

Effective ATL length: 3m (10ft)

Crossover frequencies: 380Hz & 3.8kHz

Drive unit complement:

  • LF PMC 310mm (12-inch) Radial driver
  • MF PMC hand-built 75mm soft-dome driver
  • HF PMC 34mm soft-dome tweeter with acoustic radiator

Amplifier power: LF 1 x 2400Wrms, MF 1 x 550Wrms, HF 1 x 275Wrms

I/O: Balanced analogue input, digital AES3 input

Digital input: AES3, 24-bit, 192kHz

Analogue input sensitivity: Adjustable +4dB to +20dBu

EQ: LF shelf +/-8dB, HF shelf +/-8dB

Remote control: Wired via RJ45, rotary volume -48.5dB to +15dB

Operational voltage: 115V/230V

Cabinet dimensions: H 870mm (34.2 inches) W 380mm (15 inches) D 535mm (21 inches)

Weight: 49kg (108lbs) each

Available finishes: Studio black


PMC's patented ATL speaker technology to create a dynamic, accurate speaker
₹0.00
PMC Loudspeakers MB3 XBD-A Three-Way Active Studio Monitors (MB3 XBD-A Three-Way Active Studio Monitors)

PMC Loudspeakers MB3 XBD-A Three-Way Active Studio Monitors - Pair

The PMC MB3-A with the XBD Extended Bass Cabinet for even more dynamic range.

The PMC Loudspeakers MB3 XBD-A takes the clarity and power of the MB3-A and adds the XBD extended bass cabinet devoted exclusively to bass. With an additional single 12-inch Radial bass driver, the twin-cabinet MB3 XBD-A system offers even better dynamics than the MB3, with an additional 3dB of headroom below the bass crossover frequency of 380Hz, and allows larger rooms to be driven with an even smoother frequency response, producing a maximum SPL of 129dB.

The twin XBD cabinets can be freestanding or soffit-mounted, and may be positioned vertically or side by side for greater flexibility. As with the MB3-A, a matching low-profile centre channel (MB3 XBD-C-A) is available for use in multi-channel arrays. Thanks to the wide-ranging frequency response of the twin-cabinet system, additional dedicated subwoofers are not a requirement.

MB3 XBD-A Key Features

  • Type: 3-way ATL™ active reference monitor
  • Frequency response: 20Hz-25kHz
  • Power per channel: 3225W (HF 275W, MF 550W, LF 2400W)
  • Effective ATL™ length: 2 x 3 metres
  • Maximum SPL: 129dB

ATL - Advanced Transmission Line

PMC’s unique ATL™ (Advanced Transmission Line) enclosures have taken loudspeaker design to the highest level, using sophisticated cabinet construction, proprietary drive units, and patented absorption materials and techniques. The benefits are enormous compared to the relatively simple sealed and ported designs currently available elsewhere.

PMC’s innovative approach places the bass driver near one end of a long cavity ATL™ (the Advanced Transmission Line). This cavity is heavily damped with acoustic material specified carefully to absorb the upper bass and higher frequencies radiating from the rear of the bass driver. The lowest frequencies are allowed to pass down the line and emerge from the large frontal vent in the same polarity as the driver’s direct radiation, the vent acting essentially as a second bass driver. An important benefit of the approach is that the air pressure inside the cabinet, which loads the bass driver, remains consistent. This helps to maintain control of the driver over a wide frequency range and significantly reduces LF distortion. Consequently, the upper bass and mid-range detail is not masked by harmonic distortion and the result is PMC’s characteristically transparent mid-range, fast, dynamic bass, and outstanding clarity.

A further advantage of the ATL™ design approach is greater bass extension and higher SPL capability compared to typical ported or sealed designs of a similar size and driver specification. Moreover, the very consistent bass driver loading brings the welcome benefit that the frequency response remains consistent regardless of listening level, and analytical auditioning can be conducted without the need for high replay volumes to achieve an optimal bass response. This tonal consistancy at all output levels is a unique and very valuable characteristic of PMC’s Advanced Transmission Line.

Silent Cabinet

The highly engineered MB3 cabinets play an integral role in the overall superb performance of the loudspeakers. Aside from incorporating the Advanced Transmission Line itself, the enclosure has to be of a high standard to eradicate colouration and audible cabinet talk. Highly braced, resonance-damped Medite® is used with offset HF and MF drivers, radiused edges and acoustically absorbent StealthBaffles™ at the boundaries, as deployed in the QB1-A design, to minimise edge diffraction effects. These details were formulated with the aid of pioneering acoustic research and measurements undertaken by PMC in anechoic environments at the UK’s National Physical Laboratory, using opto-acoustic laser interferometry to map the soundfield and acoustic dispersion.

Sublime Highs and Mids

The MB3 features PMC’s hand-built, precision matched 34mm soft-dome HF driver and legendary 75mm fabric soft-dome mid-range driver, renowned for their natural, transparent sound and ultra-low distortion. The perforated acoustic lens on the high-frequency driver extends the treble response to well beyond the upper limit of human hearing, and controls dispersion to ensure close integration with the mid-range; the output of both drivers is meticulously combined to create an ultra-wide, stable image and entirely natural in-room response.

When designing the 75mm soft-dome, PMC’s aim was to create a driver capable of reproducing vocals, in particular, with unparallelled authenticity and transparency — but to high SPLs when required. Each handcrafted unit takes seven days to produce, and has to pass exceptionally tight matching and testing criteria. The result is an extremely clean, neutral and natural sounding mid-range driver, which means it can be used for long periods without inducing fatigue.

Deep and Meaningful Bass

High-performance bass drivers present serious engineering challenges. The power requirements, especially at higher SPLs, produce a rapid build-up of heat in poor designs. Heat is itself damaging to performance, causing power compression effects: rapid loss of efficiency, lower output levels and higher distortion. The Radial™ drivers employed in the PMC MB3 and BB6 are uniquely specified to drive ATL™ loudspeakers, using PMC’s own ultra-rigid, low-mass cone in a custom-built Radial basket. Not only is the chassis carefully constructed to conduct heat away from the driver’s voice coil, the design also vents hot air through the back of the driver assembly. In this way, heat is efficiently dissipated even when the speakers are operating at high level, ensuring that distortion is negligible, reliability stays high, and frequency response and performance remain consistent at all output levels — irrespective of how long the speakers have been in use.



XBD Extended Bass Cabinet for even more dynamic range
₹0.00
PMC Loudspeakers BB6-A Three-Way Active Studio Monitors (BB6-A Three-Way Active Studio Monitors)

PMC Loudspeakers BB6-A Three-Way Active Studio Monitors - Pair

The BB6 is the next generation of PMC's historic line of studio monitors, featuring the clarity and range you expect with even more power and improved performance.

The PMC Loudspeakers BB6-A Active Studio Monitors build upon the unique heritage and 25-year success of PMC’s BB5. The BB6 features the same wide dynamic range and frequency response, 15-inch Radial™ bass driver, unwavering tonal consistency at all output levels and high maximum SPL (up to 128dB) of its predecessor, but also adds the additional power and flexibility of PMC’s proprietary Class-D amplification and DSP control. Flat down to a truly profound 17Hz and extending to beyond the limits of human hearing at 25kHz, the BB6-A may be used in larger recording, mixing, mastering or outside broadcast applications, and is equally at home in a tower configuration or mounted in soffits — although soffit-mounting is not essential, as the ATL™ bass response is sufficient without the LF gain achieved by soffit-mounting.

You won't be needing at dedicated subwoofer, as the BB6-A cabinets already cover the 20-60Hz sub-bass frequency range with ease. But, if you did want that extra bass, and sub-bass frequency, you can take a look at the BB6 XBD-A with the PMC Extended Bass Cabinet.

BB6 Key Features

  • Type: 3-way ATL™ active reference monitor
  • Frequency response: 17Hz-25kHz
  • Power per channel: 3225W (HF 275W, MF 550W, LF 2400W)
  • Effective ATL™ length: 4 metres
  • Maximum SPL: 128dB

ATL - Advanced Transmission Line

PMC’s unique ATL™ (Advanced Transmission Line) enclosures have taken loudspeaker design to the highest level, using sophisticated cabinet construction, proprietary drive units, and patented absorption materials and techniques. The benefits are enormous compared to the relatively simple sealed and ported designs currently available elsewhere.

PMC’s innovative approach places the bass driver near one end of a long cavity ATL™ (the Advanced Transmission Line). This cavity is heavily damped with acoustic material specified carefully to absorb the upper bass and higher frequencies radiating from the rear of the bass driver. The lowest frequencies are allowed to pass down the line and emerge from the large frontal vent in the same polarity as the driver’s direct radiation, the vent acting essentially as a second bass driver. An important benefit of the approach is that the air pressure inside the cabinet, which loads the bass driver, remains consistent. This helps to maintain control of the driver over a wide frequency range and significantly reduces LF distortion. Consequently, the upper bass and mid-range detail is not masked by harmonic distortion and the result is PMC’s characteristically transparent mid-range, fast, dynamic bass, and outstanding clarity.

A further advantage of the ATL™ design approach is greater bass extension and higher SPL capability compared to typical ported or sealed designs of a similar size and driver specification. Moreover, the very consistent bass driver loading brings the welcome benefit that the frequency response remains consistent regardless of listening level, and analytical auditioning can be conducted without the need for high replay volumes to achieve an optimal bass response. This tonal consistancy at all output levels is a unique and very valuable characteristic of PMC’s Advanced Transmission Line.

Silent Cabinet

The highly engineered BB6 cabinets play an integral role in the overall superb performance of the loudspeakers. Aside from incorporating the Advanced Transmission Line itself, the enclosure has to be of a high standard to eradicate colouration and audible cabinet talk. Highly braced, resonance-damped Medite® is used with offset HF and MF drivers, radiused edges and acoustically absorbent StealthBaffles™ at the boundaries, as deployed in the QB1-A design, to minimise edge diffraction effects. These details were formulated with the aid of pioneering acoustic research and measurements undertaken by PMC in anechoic environments at the UK’s National Physical Laboratory, using opto-acoustic laser interferometry to map the soundfield and acoustic dispersion.

Sublime Highs and Mids

The BB6 features PMC’s hand-built, precision matched 34mm soft-dome HF driver and legendary 75mm fabric soft-dome mid-range driver, renowned for their natural, transparent sound and ultra-low distortion. The perforated acoustic lens on the high-frequency driver extends the treble response to well beyond the upper limit of human hearing, and controls dispersion to ensure close integration with the mid-range; the output of both drivers is meticulously combined to create an ultra-wide, stable image and entirely natural in-room response.

When designing the 75mm soft-dome, PMC’s aim was to create a driver capable of reproducing vocals, in particular, with unparallelled authenticity and transparency — but to high SPLs when required. Each handcrafted unit takes seven days to produce, and has to pass exceptionally tight matching and testing criteria. The result is an extremely clean, neutral and natural sounding mid-range driver, which means it can be used for long periods without inducing fatigue.

Deep and Meaningful Bass

High-performance bass drivers present serious engineering challenges. The power requirements, especially at higher SPLs, produce a rapid build-up of heat in poor designs. Heat is itself damaging to performance, causing power compression effects: rapid loss of efficiency, lower output levels and higher distortion. The Radial™ drivers employed in the PMC BB6 and BB6 are uniquely specified to drive ATL™ loudspeakers, using PMC’s own ultra-rigid, low-mass cone in a custom-built Radial basket. Not only is the chassis carefully constructed to conduct heat away from the driver’s voice coil, the design also vents hot air through the back of the driver assembly. In this way, heat is efficiently dissipated even when the speakers are operating at high level, ensuring that distortion is negligible, reliability stays high, and frequency response and performance remain consistent at all output levels — irrespective of how long the speakers have been in use.


Technical Specs:

Type: Active 3-way, single-cabinet reference monitor

Usable frequency response: 17Hz - 25kHz

Maximum SPL: 128dB @1metre

Effective TAdvanced Transmission Line Length: 4m (13ft)

Crossover frequencies: 380Hz & 3.8kHz

Drive unit complement:

  • LF PMC 380mm (15-inch) Radial driver
  • MF PMC hand-built 75mm soft-dome driver
  • HF PMC 34mm soft-dome tweeter with acoustic radiator

Amplifier power: LF 1 x 2400Wrms, MF 1 x 550Wrms, HF 1 x 275Wrms

I/O: Balanced analogue input, digital AES3 input

Digital input: AES3, 24-bit, 192kHz

Analogue input sensitivity: Adjustable +4dB to +20dBu

EQ: LF shelf +/-8dB, HF shelf +/-8dB

Remote control: Wired via RJ45, rotary volume -48.5dB to +15dB

Operational voltage: 115V/230V

Cabinet dimensions: H 1040mm (40.9 inches) W 432mm (17 inches) D 790mm (31.1 inches)

Weight: 73kg (161lbs) each

Available finishes: Studio black

3-way ATL™ active reference monitor
₹0.00
PMC Loudspeakers BB6 XBD-A Three-Way Active Studio Monitors (BB6 XBD-A Three-Way Active Studio Monitors)

PMC Loudspeakers BB6 XBD-A Three-Way Active Studio Monitors - Pair

The PMC BB6 XBD-A features all the clarity and power of the BB6 with the XBD Extended Bass Cabinet for even more dynamic range.

The PMC Loudspeakers  BB6 XBD-A Active Studio Monitors take the staggering performance specification of the BB6-A and add more low end range with the XBD-A Extended Bass Cabinet, taking distortion to new lows and pushing the maximum SPL output of this system to a powerful but tightly controlled 131dB thanks to its twin 15-inch Radial™ low frequency drivers, and creating a smoother in-room response, even in the most expansive of listening environments. The BB6 XBDC- A is available as the dedicated centre speaker for multi-channel systems, while the dedicated LFE inputs and effortlessly extended low-end response render stand-alone subwoofers unnecessary.

As with the MB3 XBD-A, the twin XBD cabinets can be freestanding or soffit-mounted, and positioned side by side or vertically. In the latter configuration, the BB6 XBD-A gives new meaning to the concept of the stand-alone tower speaker, reaching a height when floor-mounted of nearly seven feet.

BB6 XBD-A Key Features

  • Type: 3-way ATL™ active reference monitor
  • Frequency response: 17Hz-25kHz
  • Power per channel: 5625W (HF 275W, MF 550W, 2 x LF 2400W)
  • Effective ATL™ length: 2

ATL - Advanced Transmission Line

PMC’s unique ATL™ (Advanced Transmission Line) enclosures have taken loudspeaker design to the highest level, using sophisticated cabinet construction, proprietary drive units, and patented absorption materials and techniques. The benefits are enormous compared to the relatively simple sealed and ported designs currently available elsewhere.

PMC’s innovative approach places the bass driver near one end of a long cavity ATL™ (the Advanced Transmission Line). This cavity is heavily damped with acoustic material specified carefully to absorb the upper bass and higher frequencies radiating from the rear of the bass driver. The lowest frequencies are allowed to pass down the line and emerge from the large frontal vent in the same polarity as the driver’s direct radiation, the vent acting essentially as a second bass driver. An important benefit of the approach is that the air pressure inside the cabinet, which loads the bass driver, remains consistent. This helps to maintain control of the driver over a wide frequency range and significantly reduces LF distortion. Consequently, the upper bass and mid-range detail is not masked by harmonic distortion and the result is PMC’s characteristically transparent mid-range, fast, dynamic bass, and outstanding clarity.

A further advantage of the ATL™ design approach is greater bass extension and higher SPL capability compared to typical ported or sealed designs of a similar size and driver specification. Moreover, the very consistent bass driver loading brings the welcome benefit that the frequency response remains consistent regardless of listening level, and analytical auditioning can be conducted without the need for high replay volumes to achieve an optimal bass response. This tonal consistancy at all output levels is a unique and very valuable characteristic of PMC’s Advanced Transmission Line.

Silent Cabinet

The highly engineered BB6 cabinets play an integral role in the overall superb performance of the loudspeakers. Aside from incorporating the Advanced Transmission Line itself, the enclosure has to be of a high standard to eradicate colouration and audible cabinet talk. Highly braced, resonance-damped Medite® is used with offset HF and MF drivers, radiused edges and acoustically absorbent StealthBaffles™ at the boundaries, as deployed in the QB1-A design, to minimise edge diffraction effects. These details were formulated with the aid of pioneering acoustic research and measurements undertaken by PMC in anechoic environments at the UK’s National Physical Laboratory, using opto-acoustic laser interferometry to map the soundfield and acoustic dispersion.

Sublime Highs and Mids

The BB6 features PMC’s hand-built, precision matched 34mm soft-dome HF driver and legendary 75mm fabric soft-dome mid-range driver, renowned for their natural, transparent sound and ultra-low distortion. The perforated acoustic lens on the high-frequency driver extends the treble response to well beyond the upper limit of human hearing, and controls dispersion to ensure close integration with the mid-range; the output of both drivers is meticulously combined to create an ultra-wide, stable image and entirely natural in-room response.

When designing the 75mm soft-dome, PMC’s aim was to create a driver capable of reproducing vocals, in particular, with unparallelled authenticity and transparency — but to high SPLs when required. Each handcrafted unit takes seven days to produce, and has to pass exceptionally tight matching and testing criteria. The result is an extremely clean, neutral and natural sounding mid-range driver, which means it can be used for long periods without inducing fatigue.

Deep and Meaningful Bass

High-performance bass drivers present serious engineering challenges. The power requirements, especially at higher SPLs, produce a rapid build-up of heat in poor designs. Heat is itself damaging to performance, causing power compression effects: rapid loss of efficiency, lower output levels and higher distortion. The Radial™ drivers employed in the PMC BB6 and BB6 are uniquely specified to drive ATL™ loudspeakers, using PMC’s own ultra-rigid, low-mass cone in a custom-built Radial basket. Not only is the chassis carefully constructed to conduct heat away from the driver’s voice coil, the design also vents hot air through the back of the driver assembly. In this way, heat is efficiently dissipated even when the speakers are operating at high level, ensuring that distortion is negligible, reliability stays high, and frequency response and performance remain consistent at all output levels — irrespective of how long the speakers have been in use.


Technical Specs:

Type: Active 3-way, twin-cabinet reference monitor

Usable frequency response: 17Hz - 25kHz

Maximum SPL: 131dB @1metre

Effective Advanced Transmission Line Length: 2 x 4m (13ft)

Crossover frequencies: 380Hz & 3.8kHz

Drive unit complement:

  • LF 2 x PMC 380mm (15-inch) Radial driver
  • MF PMC hand-built 75mm soft-dome driver
  • HF PMC 34mm soft-dome tweeter with acoustic radiator

Amplifier power: LF 2 x 2400Wrms, MF 1 x 550Wrms, HF 1 x 275Wrms

I/O: Balanced analogue input, digital AES3 input

Digital input: AES3, 24-bit, 192kHz

Analogue input sensitivity: Adjustable +4dB to +20dBu

EQ: LF shelf +/-8dB, HF shelf +/-8dB

Remote control: Wired via RJ45, rotary volume -48.5dB to +15dB

Operational voltage: 115V/230V

Cabinet dimensions: H 2080mm (81.8 inches) W 432mm (17 inches) D 790mm (31.1 inches)

Weight: 136kg (300lbs) each

Available finishes: Studio black

BB6 with the XBD Extended Bass Cabinet for even more dynamic range
₹0.00
PMC Loudspeakers twotwo.5 Active Studio Monitors - Pair ( Twotwo.5 Active Studio Monitors - Pair)

PMC Loudspeakers twotwo.5 Active Studio Monitors - Pair

The PMC twotwo.5 is a true compact reference monitors with ATL™ bass loading technology

ThePMC Loudspeakers twotwo.5 studio monitor combines hi-quality digital signal processing with active amplification, creating a remarkably accurate and versatile two-way reference grade monitor in a compact package.

The twotwo.5 combines a 27mm tweeter with a 140mm (5.5-inch) bass/mid driver housed in an Advanced Transmission Line labyrinth cabinet for a bass response that defies the monitor’s size.

Like the rest of the twotwo range, you can use the speakers vertically and horizontally without compromising on dynamics or frequency response. Plug in any audio in any room and let the onboard sample rate or A/D conversion take care of the rest. The twotwo’s powerful DSP engine will also take care of driver response, EQ and crossover so you can stay focused on the music.

This makes the twotwo.5 the ideal nearfield monitoring solution for small control rooms, project studios or anywhere where space is at a premium but quality is of utmost importance.


Technical Specs:


Available Finishes: Blackblue
Complementary Products: Digital Monitor Controller , rc1, Tube 104, twotwo wall bracket
Crossover Frequency: 1.8kHz
Dimensions: H 296 W 155 D 295 (mm)
Drive Units: LF 140mm (5.5 inch), HF 27mm Soft Dome
Effective ATL™ Length: 1.5m (4.92ft)
Frequency Response: 50Hz – 25kHz
Input Connectors: Balanced analogue XLR, unbalanced RCA-phono, AES3 digital XLR, (left/right channel selectable), All XLR-3F connectors wired Pin-1 screen, Pin-2 hot, Pin-3 cold, Each input has independent ±8dB trim range
Useable Frequency Response: 50Hz – 25kHz Peak SPL @ 1M: 111dB
Weight: 5.4kg

Compact reference monitors with ATL™ bass loading technology
₹0.00
PMC Loudspeakers twotwo.6 Active Studio Monitors - Pair (Twotwo.6 Active Studio Monitors - Pair)

PMC Loudspeakers twotwo.6 Active Studio Monitors - Pair

The PMC twotwo.6 is a true compact reference monitors with ATL™ bass loading technology

The PMC Loudspeakers twotwo.6 studio monitor is a mid-size, nearfield reference monitor that combines the same design quality and sophisticated digital signal processing as the smaller twotwo.5 monitor.

A larger Advanced Transmission Line labyrinth cabinet and 170mm (6.5”) bass driver gives the twotwo.6 a more extensive bass performance and higher SPLs.

Just like the rest of the twotwo range, the twotwo.6 sounds great in both vertical and horizontal orientation, without ever compromising on dynamics or frequency response. PMC’s class-leading connectivity means you can quickly and easily plug in any audio ¬– analog or digital (up to 192kHz) – and you’re ready to go: the onboard sample rate or A/D conversion will take care of the rest. No acoustic treatment in your room? No problem. The twotwo’s powerful DSP engine will also take care of driver response, EQ and crossover leaving you to stay focused on the music.

The twotwo.6 shares the same high-quality transparency and neutral balance as the rest of the range, and is an ideal monitor for use in medium-sized rooms where more power and dynamics are required.


Technical Specs:

Available Finishes: Blackblue
Crossover Frequency: 1.8kHz
Dimensions: H 406 W 194 D 364 (mm)
Drive Units: LF 170mm (6.5 inch) , HF 27mm Soft Dome
Effective ATL™ Length: 1.6m (5.25ft)
Frequency Response: 40 – 25kHz
Useable Frequency Response: 40 – 25kHz Peak SPL @ 1M: 113dB
Weight: 8.4kg



Compact reference monitors with ATL™ bass loading technology
₹600,000.00
PMC Loudspeakers twotwo.8 Active Studio Monitors - Pair (Twotwo.8 Active Studio Monitors - Pair)

PMC Loudspeakers twotwo.8 Active Studio Monitors - Pair

The PMC twotwo.8 is a true compact reference monitors with ATL™ bass loading technology

The PMC Loudspeakers twotwo.8 studio monitor is the flagship model of PMC’s twotwo series. It is the largest and most powerful monitor in the range, employing a large 20mm (8”) custom bass driver designed for dynamics and neutrality, housed within PMC’s trademarked Advanced Transmission Line labyrinth cabinet for a midfield monitor with superb transparency and depth.

A powerful DSP engine controls driver response, crossover and room EQ, ensuring none of the detail and nuance is lost from the source.

As with the rest of the twotwo range, the twotwo.8 performs flawlessly whether in a vertical or horizontal position, with no compromise on dynamics or frequency response. The twotwo.8 boasts incredible midrange clarity and a powerful bass response for that can accurately reproduce any genre of music.

Whether you’re plugging in analog or digital, in a home studio or a professional control room, PMC’s twotwo.8 is a professional reference loudspeaker monitor you can count on.

Technical Specs:


Available Finishes: Blackblue
Complementary Products: twotwo.5, twotwo.6
Crossover Frequency: 1.8kHz
Dimensions: H 500 W 250 D 415 (mm)
Drive Units: LF 200mm (8"), HF 27mm Soft Dome
Effective ATL™ Length: 1.9m (6.2ft)
Useable Frequency Response: 35Hz - 25kHz
Weight: 12.2kg



Compact reference monitors with ATL™ bass loading technology
₹0.00
PMC Loudspeakers twotwo.5 Active Studio Monitors - B-Stock Deal (Twotwo.5 Active Studio Monitors - B-Stock Deal)

PMC Loudspeakers twotwo.5 Active Studio Monitors - B-Stock Deal

PMC B-Stock Deal twotwo.5 studio monitors can save you some money your studio speakers. B-Stock items are open box with full factory warranty, in perfect working order and in very good physical condition unless otherwise stated.

Feel free to contact us for specific condition of the exact pair that are currently available. We’re happy to send some pictures, too.

The PMC Loudspeakers twotwo.5 studio monitor combines hi-quality digital signal processing with active amplification, creating a remarkably accurate and versatile two-way reference grade monitor in a compact package.

The twotwo.5 combines a 27mm tweeter with a 140mm (5.5-inch) bass/mid driver housed in an Advanced Transmission Line labyrinth cabinet for a bass response that defies the monitor’s size.

Like the rest of the twotwo range, you can use the speakers vertically and horizontally without compromising on dynamics or frequency response. Plug in any audio in any room and let the onboard sample rate or A/D conversion take care of the rest. The twotwo’s powerful DSP engine will also take care of driver response, EQ and crossover so you can stay focused on the music.

This makes the twotwo.5 the ideal nearfield monitoring solution for small control rooms, project studios or anywhere where space is at a premium but quality is of utmost importance.



Technical Specs:


Available Finishes: Blackblue
Complementary Products: Digital Monitor Controller , rc1, Tube 104, twotwo wall bracket
Crossover Frequency: 1.8kHz
Dimensions: H 296 W 155 D 295 (mm)
Drive Units: LF 140mm (5.5 inch), HF 27mm Soft Dome
Effective ATL™ Length: 1.5m (4.92ft)
Frequency Response: 50Hz – 25kHz
Input Connectors: Balanced analogue XLR, unbalanced RCA-phono, AES3 digital XLR, (left/right channel selectable), All XLR-3F connectors wired Pin-1 screen, Pin-2 hot, Pin-3 cold, Each input has independent ±8dB trim range
Useable Frequency Response: 50Hz – 25kHz Peak SPL @ 1M: 111dB
Weight: 5.4kg








Hghi-quality digital signal processing with active amplification
₹0.00
PMC Loudspeakers twotwo.6 Active Studio Monitors - B-Stock Deal (Twotwo.6 Active Studio Monitors - B-Stock Deal)

PMC Loudspeakers twotwo.6 Active Studio Monitors - B-Stock Deal

PMC B-Stock Deal twotwo.6 studio monitors can save you some money your studio speakers. B-Stock items are open box with full factory warranty, in perfect working order and in very good physical condition unless otherwise stated.

Feel free to contact us for specific condition of the exact pair that are currently available. We’re happy to send some pictures, too.

The PMC Loudspeakers twotwo.6 mid-size, nearfield reference monitor combines the same design quality and sophisticated digital signal processing as the smaller twotwo.5 monitor.

A larger Advanced Transmission Line labyrinth cabinet and 170mm (6.5”) bass driver gives the twotwo.6 a more extensive bass performance and higher SPLs.

Just like the rest of the twotwo range, the twotwo.6 sounds great in both vertical and horizontal orientation, without ever compromising on dynamics or frequency response. PMC’s class-leading connectivity means you can quickly and easily plug in any audio ¬– analog or digital (up to 192kHz) – and you’re ready to go: the onboard sample rate or A/D conversion will take care of the rest. No acoustic treatment in your room? No problem. The twotwo’s powerful DSP engine will also take care of driver response, EQ and crossover leaving you to stay focused on the music.

The twotwo.6 shares the same high-quality transparency and neutral balance as the rest of the range, and is an ideal monitor for use in medium-sized rooms where more power and dynamics are required.


Technical Specs:


Available Finishes: Blackblue
Crossover Frequency: 1.8kHz
Dimensions: H 406 W 194 D 364 (mm)
Drive Units: LF 170mm (6.5 inch) , HF 27mm Soft Dome
Effective ATL™ Length: 1.6m (5.25ft)
Frequency Response: 40 – 25kHz
Useable Frequency Response: 40 – 25kHz Peak SPL @ 1M: 113dB
Weight: 8.4kg



Nearfield reference monitor combines sophisticated digital signal processing
₹0.00
PMC Loudspeakers twotwo.8 Active Studio Monitors - B-Stock Deal (Twotwo.8 Active Studio Monitors - B-Stock Deal)

PMC Loudspeakers twotwo.8 Active Studio Monitors - B-Stock Deal

PMC B-Stock Deal twotwo.8 studio monitors can save you some money your studio speakers. B-Stock items are open box with full factory warranty, in perfect working order and in very good physical condition unless otherwise stated.

Feel free to contact us for specific condition of the exact pair that are currently available. We’re happy to send some pictures, too.

The PMC Loudspeakers twotwo.8 studio monitor is the flagship model of PMC’s twotwo series. It is the largest and most powerful monitor in the range, employing a large 20mm (8”) custom bass driver designed for dynamics and neutrality, housed within PMC’s trademarked Advanced Transmission Line labyrinth cabinet for a midfield monitor with superb transparency and depth.

A powerful DSP engine controls driver response, crossover and room EQ, ensuring none of the detail and nuance is lost from the source.

As with the rest of the twotwo range, the twotwo.8 performs flawlessly whether in a vertical or horizontal position, with no compromise on dynamics or frequency response. The twotwo.8 boasts incredible midrange clarity and a powerful bass response for that can accurately reproduce any genre of music.

Whether you’re plugging in analog or digital, in a home studio or a professional control room, PMC’s twotwo.8 is a professional reference loudspeaker monitor you can count on.



Technical Specs:


Available Finishes: Blackblue
Complementary Products: twotwo.5, twotwo.6
Crossover Frequency: 1.8kHz
Dimensions: H 500 W 250 D 415 (mm)
Drive Units: LF 200mm (8"), HF 27mm Soft Dome
Effective ATL™ Length: 1.9m (6.2ft)
Useable Frequency Response: 35Hz - 25kHz
Weight: 12.2kg
Flagship model of PMC’s twotwo series
₹0.00
PMC result6 Loudspeakers Active Studio Monitors - Pair (Result6 Active Studio Monitors - Pair)

PMC Loudspeakers result6 Active Studio Monitors - Pair

The PMC result6, PMC's newest studio monitor in India now available in Chennai, is the “result” of 26 years of painstaking development, and is a high resolution compact reference monitor at an affordable price.

The PMC Loudspeakers result6 is an active two-way reference monitor offering all of the attributes for which PMC is world-renowned: high resolution and detail, accurate, extended bass, consistent tonal balance at all levels, and wide dispersion and sweet spot. result6 features a 27mm fabric soft-dome with D-Fins for superior HF dispersion and a 6.5" Mid/Bass driver with ATL technology, the proprietary bass-loading system that provides exceptional LF extension in a small cabinet, with no coloration. With an emphasis on elegant simplicity, result6 is a compact nearfield that allows you to work faster and more confidently; in short, to see, hear and achieve results more quickly.

result6 features no overly complex DSP-based user options or room profiles; instead, the result6 achieves its characteristically neutral, dependable PMC reference sound solely on the strength of its engineering. Honed to the fundamentals of PMC's design philosophy, it's devoted to getting you the best sounding results in the shortest possible time.

PMC result6 Key Features:

  • D-Fins for superior HF dispersion giving you an extra-wide stereo sweet spot.
  • PMC Patented ATL (Advanced Transmission Line) technology provides exceptional LF extension in a small footprint, with no coloration
  • Laser measurement ensures optimal performance by rapidly and repeatedly scanning the surface of the drive unit during operation, measuring every micro-movement with phenomenal accuracy
  • High-power amplification: HF 65W, LF 100W
  • Cabinet Decoupling Bands prevent the result6 from slipping, and also decouple it acoustically, preventing unwanted vibrations from coloring your sound.
  • Anchor Points allowing the speakers to be wallmounted and precisely positioned.

D-Fins create a bigger, more detailed stereo image

PMC engineered the distinctive, finned HF driver surround — known on the result6 as the D-Fins — to resolve both of these issues, delivering major sonic benefits. The design widens the stereo sweet spot (which is already generous, in keeping with other PMC designs). The result is an excellent off-axis response over a wider area. The D-Fins also eradicate the cabinet edge effects, ensuring high-frequency sound remains razor-sharp and unsmeared. This means that you have greater freedom to change your position as you work without adversely affecting what you hear, and that the frequency response of the speakers is flat and natural-sounding.

ATL provides sonically superior bass

PMC’s unique ATL (Advanced Transmission Line) places the bass driver near one end of a long tunnel (the Advanced Transmission Line), which is heavily damped with acoustic material carefully specified to absorb the upper bass and higher frequencies radiating from the rear of the bass driver. The lowest frequencies are allowed to pass down the line and emerge from the front vent in the same polarity as the bass unit’s output, so that the vent acts like a second LF driver

ATL bass-loading technology offers exceptional LF extension with no colouration, identical tonal balance at all levels, and higher SPLs without compression or listener fatigue.

Laser Measurement — for the ultimate precision

The result6 is the first PMC product to benefit from their groundbreaking laser-based measurement system. This performs extremely accurate assessments of the drivers’ performance by rapidly and repeatedly scanning the surface of the drive unit during operation, measuring every micro-movement with phenomenal accuracy.

In PMC's two-stage driver refinement process, the design of the bass unit is first optimized following a series of laser measurements conducted in free space. At the second stage, the driver is fitted into the loudspeaker cabinet and ATL. The laser measurement system is then used again, this time on the complete loudspeaker, and the drivers, cabinet and ATL are honed in situ, the process being repeated until their optimum performance is attained. In particular, the ATL and bass driver are tuned so that the driver produces the maximum possible output for the minimum possible excursion, which eradicates distortion and colouration.


Technical Specs:


Usable frequency response:
45Hz - 22kHz
Maximum SPL:
112dB @1metre
Effective ATL length:
1.5m (4.9ft)
Crossover frequency:
2kHz
Drive units:
LF 170mm (6.5 inch), doped natural fibre cone
HF 27mm fabric soft dome
Cabinet dimensions:
H380 x W199 x D360 (mm)
Weight:
8kg (17.6lbs)
Input connectors:
Balanced analogue XLR, wired Pin-1 screen, Pin-2 hot, Pin-3 cold
Mains power:
IEC connector, 90-260V
Amplifier section:
LF 100Wrms, HF 65Wrms
Gain trim:
-10dB to +10dB
Input impedance:
> 8kΩ


High resolution and detail, accurate, extended bass, consistent tonal balance at all levels
₹265,000.00
PMC Loudspeakers IB1S-AIII Three-Way Active Studio Monitors - Pair (IB1S-AIII Three-Way Active Studio Monitors - Pair)

PMC Loudspeakers IB1S-AIII Three-Way Active Studio Monitors - Pair

High Resolution, plug and play studio monitors.

The PMC Loudspeakers IB1S-AIII 'Activated' Studio Monitor is a high resolution 3-way speaker that combines flexible plug and play design with PMC's unsurpassed audio transparency and accuracy.

Ideally suited audio professionals working in small to medium sized control rooms, the IB1S-AIII provides a natural, compression-free flat response at all levels.

The newest monitor from PMC features precision soft dome 27mm HF and 75mm MF drivers, providing an extremely wide dispersion and creating a vivid soundstage over a vast listening area. The combination of PMC's 10" carbon fibre and Nomex LF piston driver paired with the company's Advanced Transmission Line bass-loading technology provides an unmatched response down to 25Hz.

The IB1S-AIII also features a hand-built precision passive 24dB per octave crossover network, which utilizes 31 carefully selected components to divide the amplifier’s output signal into three frequency bands and ensures each drive unit is working within its optimal range, both in frequency and dispersion.


Technical Specs:


Available Finishes: Studio black
Crossover Frequency: 380Hz & 3.8kHz
Dimensions: H 740mm (29.1") x W 330mm (12.9") x D 510mm (20")
Distortion: <0.05% 20hz - 20kHz
Drive Units: LF PMC 250mm/10” Carbon Fibre/Nomex™ piston driver, MF 75mm doped fabric soft dome, HF 27mm fabric soft dome
Effective ATL™ Length: 2.4m (8ft)
Impedance: 16.5k Ω
Input Connectors: Balanced XLR, Mains input IEC connector, 100V - 240V
Peak SPL: 116dB @ 1m
Sensitivity: Variable 17dB-37dB
Useable Frequency Response: 25Hz-25kHz
Weight: 45kg 99.2lbs


High Resolution, plug and play studio monitors
₹0.00
PMC Loudspeakers IB2S-AII Three-Way Active Studio Monitors - Pair (IB2S-AII Three-Way Active Studio Monitors - Pair)

PMC Loudspeakers IB2S-AII Three-Way Active Studio Monitors with Stands

Three-way high performance active monitor with included stands. Features DSP-Controlled, Class-D powered cabinets and PMC's patented ATL bass-loading technology.

The PMC Loudspeakers IB2S-AII Active Studio Monitor is a three-way mid-field monitor that provides the same attributes as PMC’s large Advanced Transmission Line reference active monitors in a more compact package.

The three-way IB2S-AII offers discerning users all the attributes of PMC’s large ATL™ reference active monitors but in a more compact form. They are ideal for high-end reference monitoring in both stereo and surround formats.

The DSP-controlled, Class-D powered cabinets make use of PMC’s ATL™ (Advanced Transmission Line) bass-loading technology, providing a smoothly controlled, high-resolution low-frequency response. Each cabinet features PMC’s hand-built preparatory drivers - the 10-inch carbon-fibre/Nomex™ piston, 75mm fabricdome mid, and the 34mm soft-dome tweeter. The power is supplied by PMC’s ultra-low distortion devices that are conveniently rack mountable, providing HF 275W, MF 550W and LF 1200W of acoustically transparent power.

This single cabinet monitor features user-adjustable HF and LF shelving filters, ±8dB input level trim, and an AES3 digital input, as standard. The input sensitivity of the balanced analogue inputs can also be adjusted from +4dB to +16dB. In addition, the EQ, level trims and analogue/digital input election settings can be adjusted from a distance using an RJ45-connected remote, which is supplied as standard.

PMC IB1S-AII Features
  • Type: 3-way ATL™ active reference monitor
  • Frequency response: 25Hz-25kHz
  • Analogue & digital (up 192kHz) inputs
  • Power per channel: 2025W (HF 275W, MF 550W, LF 1200W)
  • Effective ATL™ length: 2.4m(8ft)
  • Maximum SPL: 125dB
  • Three personal balance presets for multiple users

IB1S-AII Options:

  • Dedicated vertical and horizontal centre channel versions
  • Tailor made, high mass, 33” Studio Frame Stands


Technical Specs:


Amplifier Power per Channel: HF 200W , MF 200W, LF 565W
Available Finishes: Neo Black, Nextel R Cobalt Blue
Crossover Frequency: 380Hz & 3.8kHz
Dimensions: H 740mm 29.1” W 330mm (13.0”) D 549mm 21.6”
Drive Units: LF 250mm/10” PMC Carbon Fibre /Nomex™ piston driver , MF 75mm soft Dome Midrange 200W, HF 34mm Soft Dome Tweeter 200W
Effective ATL™ Length: 2.4m (8ft)
Input Connectors: Balanced Analogue Main Input/Through Balanced Analogue LFE Input/Through Digital AES3 Main Input/Through Digital AES3 LFE Input/Through , Digital input:AES3 192kHz 24bit , Analogue input sensitivity selectable: +4dB to +20dB
Useable Frequency Response: 25Hz-25kHz
Weight: 46.5kg 102.3lbs



DSP-Controlled, Class-D powered cabinets and PMC's patented ATL
₹0.00
PMC Loudspeakers DB1-Gold Passive Studio Monitor- Pair (DB1-Gold Passive Studio Monitor- Pair)

PMC Loudspeakers DB1-Gold Passive Studio Monitor- Pair

DB1 Gold - the finest version of the DB1 studio monitor made to date.

The PMC Loudspeakers DB1 Gold Passive Reference Monitor combines the same ultra-high definition sound quality made famous by PMC’s professional studio monitors with a refined look and feel at price intended to provide an incredible value to music lovers.

This hand-built, limited edition update to the DB1 monitor provides more than just a glimpse into the world of professional recording. The DB1 Gold delivers the exact sound intended by the recording artist, capturing every subtle detail and nuance of the music.

The compact cabinet features a textured black front baffle with a smooth silk main body, delivering an impressive amount of power that defies the monitor’s size. PMC are so confident in the design and engineering of the DB1 Gold that the warranty has been extended to an unheard of 20 years.



Technical Specs:


Crossover Frequency: 2kHz
Dimensions: H 290mm 11.4” x W 155mm 6.1” x D 234mm 9.19” (+ grille)
Drive Units: LF - PMC Doped 140mm cast alloy chassis, HF - 27mm fabric soft dome
Effective ATL™ Length: 1.5m 4.92ft
Frequency Response: 50Hz-25kHz
Input Connectors: 2 pairs 4mm sockets
Sensitivity: 87dB 1w 1m
Weight: 4.5kg (9.9lbs)


DB1 Gold - the finest version of the DB1 studio monitor made to date.
₹0.00
PMC Loudspeakers BB5 Passive Range Studio Monitors - Pair (BB5 Passive Range Studio Monitors - Pair)

PMC Loudspeakers BB5 Passive Range Studio Monitors - Pair

The PMC Loudspeakers BB5 Passive Studio Monitors employs much of the technology and hardware of the MB2 and is equally happy in a soffit or in free space.

The BB5 offers higher SPL’s and a vastly improved frequency range that extends lower than any other monitor available.

The BB5's astute design has a narrow front baffle that eradicates the problems of diffraction usually associated with a large main monitor. The BB5 can be matched with the XB3 subwoofer to complete a surround sound.



Technical Specs:

Available Finishes: Neo Black
Crossover Frequency: 380Hz & 3.8kHz
Dimensions: H 1040mm 40.94" W 432mm 17.01" D 790mm 31.10"
Effective ATL™ Length: 4m 13ft
Impedance: 4 Ohm nominal
Input Connectors: 3 Pairs 4mm Sockets (Tri-wire or Tri-Amp)
Recommended Amp Power: 
200-1000W
Sensitivity: 
91dB 1W 1m
Useable Frequency Response: 17Hz-25kHz Peak SPL @ 1M: 124dB
Weight: 73kg 160lbs
Design has a narrow front baffle that eradicates the problems of diffraction
₹0.00
Per Page      1 - 15 of 15
  • 1