No products in the cart.
Roll over image to zoom in
Focal PRO SHAPE 50 (SINGLE) Powered Studio Monitor
₹86745₹91310 (-5%)
- Tweeter with low directivity for an adaptable listening position
- Planned without a port, however with a twofold detached radiator, permitting it to be put close to a divider.
- Various settings for ideal incorporation
- Precise control, even in the top of the line
Focal Pro Shape 50 (single)
Versatility,Adaptability and compatibility
The Shape 50 is a high-quality adaptable monitoring loudspeaker designed for professional audio applications. It is meant to be used as a nearfield monitor, providing accurate sound reproduction in small listening environments. The speaker is designed and manufactured in France and incorporates five key innovations to enhance its acoustic performance.
Key features of the Shape 50 include:
Adaptable Monitoring:
The Shape 50 is optimized for nearfield monitoring, which means it’s intended to be placed relatively close to the listener (around 30 inches or 80 cm away). This positioning helps provide accurate sound representation.
Extended Low-End Frequency Response:
The Shape 50 boasts an extended low-end frequency response down to 50Hz. This allows for clear and detailed reproduction of bass frequencies, contributing to a well-rounded sound experience.
Acoustic Design for Small Rooms:
The speaker is designed to address the acoustic challenges of small listening rooms (up to 130ft2 or 12m2). Its design takes into account the acoustics of such spaces, ensuring that the sound remains accurate and transparent even in constrained environments.
Innovative Acoustic Enhancements:
The Shape 50 incorporates five innovative developments to enhance its acoustic performance. While the specific details of these developments are not mentioned in your text, they contribute to noticeable improvements in terms of acoustic transparency, stereo imaging, bass articulation, and control over mid-range frequencies.
Precise Tweeter:
The new tweeter in the Shape 50 is a crucial element that contributes to the high-quality sound reproduction. It efficiently handles high-frequency details, revealing nuances and intricacies in the audio, and is particularly accurate in reproducing the upper frequency range.
Overall, the Shape 50 monitoring loudspeaker is designed to provide audio professionals with a reliable tool for accurate sound monitoring in small listening environments. Its thoughtful design, innovative features, and emphasis on acoustic transparency make it a suitable choice for critical listening applications where precise sound reproduction is essential.
Key Features
- Tweeter with low directivity for an adaptable listening position
- Planned without a port, however with a twofold detached radiator, permitting it to be put close to a divider.
- Various settings for ideal incorporation
- Precise control, even in the top of the line
- Flax sandwich cone: controlled and very much characterized bass, common and definite lower mid-reach and upper mid-range ranges.
Specifications:
- Frequency response (+/-3dB): 50Hz – 35kHz
- Maximum SPL (musical signal): 106dB SPL (peak @ 1m)
- Electronic section
- Inputs/ Impedance
- Type XLR: balanced 10kOhms
- Connectors RCA: unbalanced 10kOhms with sensitivity compensation
- Midrange and low frequency amplifier: 60W, class AB
- High frequency amplifier: 25W, class AB
- Automatic standby
- Standby on: After approximately 30 minutes with no signal
- Standby off: Signal detection > 3 mV
- Electrical supply
- Voltages 220-240V (T800mAL / 250V fuse) or 100-120V (T1.6AL / 250V fuse)
- Connection IEC plug and detachable power cord
- Settings
- High pass filter Adjustable Full range 45/60/90Hz
- Bass (0 – 250Hz) Adjustable, +/-6dB
- Midrange/bass (160Hz, Q=1) Adjustable, +/-3dB
- High (4.5 – 35kHz) Adjustable, +/-3dB
- Power On/Power Off On/off switch on rear panel
- Standby consumption: < 0.5W
- Displays and controls: LED for power on/off and standby
- Transducers
- Woofer: 5″ (13cm) Flax Cone
- Tweeter: 1″ (25mm) ‘M’ profile Aluminum-Magnesium
- Cabinet
- Construction: 0.6″ (15mm) MDF
- Finish: Vinyl, real walnut and black painting
- Dimensions with four rubber feet (HxWxD): 12.3 x 7.5 x 9.5″ (312 x 191 x 242mm)
- Weight: 20.7lb (6.5kg)
The ProAudio has a team of music gear experts who provide you with helpful advice and unparalleled service completely free of charge. Talk with the ProAudio Consultant today and we will assist in choosing the suitable outboard gear needed for your audio requirements.
Additional information
Powered | Yes |
---|---|
Power Configuration | Bi-amped |
Quantity | Single |
LF Driver Size | 5″ woofer |
LF Driver Type | Flax Sandwich Cone |
HF Driver Size | 1″ tweeter |
HF Driver Type | M profile aluminum-magnesium |
LF Driver Power Amp | 60W |
HF Driver Power Amp | 25W |
Total Power | 85W Class AB |
Frequency Response | 50Hz-35kHz (±3dB) |
Crossover Frequency | Adjustable |
Maximum Peak SPL | 106dB SPL @ 1m |
Input Types | 1 x XLR, 1 x RCA |
Features | 3-band EQ, High-pass filter, 5″ passive side radiator |
Enclosure Type | Passive radiator |
Enclosure Material | MDF with natural walnut veneer |
Height | 12.3″ |
Width | 7.5″ |
Depth | 9.5″ |
Weight | 20.7 lbs. |
Reviews
There are no reviews yet.