Kali Audio LP 6 6.5 Powered Studio Monitor Pair

3190035900 (-11%)

In stock

  • 6.5” powered studio monitor with 1” soft-dome tweeter
  • Bi-amped design with integrated Class D power amp
  • Ruler-flat frequency response — there’s nothing hyped about this speaker
  • Exhibits negligible levels of distortion — a full 6dB lower than its nearest competitor
  • Boasts 20dB of headroom while playing continuously at 85dB
  • Large magnets and voice coils produce super-accurate low-end response and impressive low-frequency extension
  • Cutting-edge waveguide design creates a massive soundstage with spot-on imaging

Cutting-edge waveguide design yields rock-solid imaging

When you listen to a speaker, you hear both its direct sound and its reflections. When the reflections are consistent with the direct sound, the speaker sounds better. Its stereo image will sound three-dimensional, enabling you to observe subtle details, such as spatial information and microphone placement. The Kali Audio LP-6’s cutting-edge waveguide design minimizes unwanted reflections, thereby preventing the smeared sound stage that’s inherent in many low-cost studio monitors. With the LP-6, you’ll know the exact location of every instrument in your mix’s stereo field. You’ll mix faster, and produce better results.

This starts with an exceptionally accurate frequency response. Whatever is present on your mix is what you’ll hear in these monitors. Nothing is boosted or suppressed to cover flaws or try to sound more pleasing.

With the LP-6, you can mix with more confidence, and you can also be assured that your mix will translate as best as possible to whatever systems your audience is using.

3-D Imaging Waveguide

The waveguide on Project Lone Pine monitors allows you to hear spatial details and a soundstage that is wider, taller, and deeper than the space between the speakers themselves.

High dynamic range, low distortion

The dual layer, large diameter voice coil on the LP-Series helps keep the sound clear and free of distortion.

Low noise port tube

The LP-6 and LP-8 both have the clean, punchy bass of a front-ported speaker with very low noise from the port tube.

High Output

At continuous reference-level output, the LP-Series monitors have at least 20 dB headroom at the listening position. The LP-6 has enough output for most 1-2 person setups, and LP-8 can handle larger setups easily.

Ample headroom ensures that even loud mixes with high dynamic range will come through clearly.

Bass Power

Bass on the LP-Series monitors is delivered by larger magnets and larger voice coils than any comparable speakers on the market. This gives you more accurate bass response that extends lower, so you can dial in exactly the low end sound you need.

Boundary EQ ensures optimal sound in any environment

A speaker’s position in a room drastically affects its frequency response. Even if your room is acoustically treated, your studio monitor’s sound will change if you place it near a wall or on a desk. What’s more, hard surfaces like walls and the top of your console will skew your monitor’s frequency response, degrade its sound, and give you false auditory information. The engineers at Kali Audio understand this, and they baked a solution directly into the LP-6 — its Boundary EQ. Tuned to perfection at The Village Studios in Los Angeles, the LP-6’s Boundary EQ supplies you with presets that are tailored to eight common speaker placements. You also get LF/HF trims for fine-tuning the speaker’s response. With the LP-6, you’ll be able to optimize its response, no matter what environment you’re mixing in.


Easy Connections

  • The LP-6 feature balanced XLR and TRS inputs, and an unbalanced RCA input.
  • The RCA input can be set to -10 dBu sensitivity when you’re using consumer devices like a laptop or smartphone’s headphone jack.

Class D Power

  • The integrated Class D Power amp delivers clean, reliable power that’s optimized to this speaker.
  • Both models use 40W for the 1” soft dome tweeter. The LP-6 uses 40W for the 6.5-Inch woofer, and the LP-8 uses 60W for the 8-Inch woofer.
  • Powered: Yes
  • Amplifier Class: D
  • Power Configuration: Bi-Amped
  • LF Power: 40 W
  • HF Power: 40 W
  • Total Power: 80 W
  • LF Driver: 6.5″ Woofer
  • HF Driver: 1″ Soft Dome Tweeter
  • Freq. Response: (-10 dB) 39 Hz – 25 kHz
  • Frequency Range: (±3 dB) 47 Hz – 21 kHz
  • Crossover: 1.5 kHz
  • Listening Distance: (85 dB Continuous, 20 dB headroom) 2.2 Meters
  • Max SPL:112 dB
  •  Balanced Inputs:  1 x TRS 1 x XLR
  • TRS/XLR Input Sensitivity: +4 dB
  • RCA Input Sensitivity: -10 dB
  • HF Trim: -2 dB, ±0 dB, +2 dB
  • LF Trim: -2 dB, ±0 dB, +2 dB















Powered Yes
Power Configuration Bi-amped
LF Driver Size 6.5″ Woofer
LF Driver Type
HF Driver Size 1″ tweeter
HF Driver Type Silk dome
LF Driver Power Amp 40W
HF Driver Power Amp 40W
Total Power 80W Class D
Frequency range
Frequency Response 38Hz-25kHz
Crossover Frequency 24 dB/octave @ 1500Hz
Maximum Peak SPL 112 dB SPL @ 1m
Input Types 1 x XLR, 1 x RCA , 1 x 1/4″
Enclosure Type Front Ported
Height 14.125″
Width 8.75″
Depth 10.25″
Weight 15.54 lbs.
Enclosure Material


The ProAudio has a team of music gear experts who provide you with helpful advice and unparalleled service completely free of charge. Talk with the ProAudio Consultant today and we will assist in choosing the suitable outboard gear needed for your audio requirements.


Be the first to review “Kali Audio LP 6 6.5 Powered Studio Monitor Pair”

Your email address will not be published. Required fields are marked *


There are no reviews yet.

Main Menu

Kali Audio LP 6 Lone Pine 6.5 - Inch Active Near Field Studio Monitor Speaker- Pair

Kali Audio LP 6 6.5 Powered Studio Monitor Pair

3190035900 (-11%)

Add to Cart