PMC 6-2 XBD Active Studio Monitor Pair

Call for Price

In stock

  • Combines the PMC6-2 midfield studio monitor with two PMC 8-2 Sub
  • To create a powerful, full-range monitoring system with superior clarity and resolution.
  • 3-way active, twin cabinet, mid-field reference monitor with ATL bass loading
  • Frequency response: 25Hz – 25kHz (- 3dB @1m full space, on-axis)
  • Optional dedicated 19” floor stands
  • Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
Compare

The PMC6-2-XBD System combines the PMC6-2 midfield studio monitor with two PMC 8-2 Sub to create a powerful, full-range monitoring system with superior clarity and resolution.

The PMC6-2-XBD system extends the frequency response down to 25Hz and increases headroom and clarity by reducing low-frequency load occurring in the midrange driver. The result is a more realistic sound and greater depth.

Configuration of the PMC 6-2-XBD is simple and consists of connecting the input to the PMC6-2 studio monitors and linking the main speakers to the 8-2 subwoofer via the AES digital cable “through” output. Both cabinets can also be linked via LAN or chained together directly via their Network ports.

The XBD mode combines speakers and corresponding sub into a single large scale full-range monitor. Additional DSP controls can also be accessed via the rear panel or via the SoundAlign software via LAN connection. When linked, each speaker and relative sub appears as one PMC 6-2-XBD speaker in the software.

Combines a PMC8-2 SUB unit to a PMC6-2 monitor easily reconfigures them as PMC’s renowned and flexible twin-cabinet format XBD monitor system.

This system combines the PMC6-2’s unrivalled clarity and resolution with an active sub to form a perfectly integrated full-range monitoring system that is ideal for all high-end music production.
In the case of the PMC6-2, configuring it as an XBD system reinforces the bass output of the main speaker’s LF drivers, greatly increasing headroom and extending the bass down to 25Hz, creating a system with a sense of effortless capability.

Configuring the PMC6-2 XBD system is to connect the input directly to the PMC6-2, and add an AES3 digital cable to carry the main monitor’s ‘through’ output down to the PMC8-2 SUB. The two cabinets can be connected either to a LAN or directly to each other via their network ports. When you select the dedicated ‘XBD’ mode the DSP seamlessly combines both units into a single, larger-scale monitor. Further detailed configuration can be carried out from the rear-panel controls or using the intuitive SoundAlign browser-based software via the LAN connection, where both speakers appear as a single PMC6-2 XBD unit when linked.

The PMC8 SUB can be used as a compact stand-alone subwoofer within conventional multichannel systems, or as an XBD cabinet, creating a full-range PMC6 XBD midfield monitor. When used in this way, the dedicated ‘XBD’ DSP mode marries the speakers and sub unit together, creating a coherent full-range system. Our subs are also perfectly suited to use in multi-channel and immersive systems, as our ATL bass-loading technology provides a gentler low-order LF roll-off than conventional ported cabinets, allowing a smoother, seamless integration between the height and surround channels and the sub.

Features of PMC6-2-XBD:

  • Short Description: Combines the PMC6-2 midfield studio monitor with two PMC 8-2 Sub to create a powerful, full-range monitoring system with superior clarity and resolution.
  • Powered, Passive: Powered
  • Type: Nearfield
  • HF Driver:1″
  • LF Driver : Size8″
  • Speaker Design: 2-way
  • Ported: Transmission Line
  • EQ Correction: No

Specifications of PMC6-2-XBD:

PMC6-2 SPECIFICATIONS

Type:Active 3-way nearfield reference monitor with ATL bass loading

Drive Unit Complement:LF 2 x PMC 150mm (6”) studio 6 drivers

MF PMC 55mm (2”) soft dome mid-range

HF PMC 27mm (1”) soft dome tweeter

Effective ATL Length:2m (6.6ft)

Frequency Response:33Hz – 25kHz (- 3dB) (@1m full space, on-axis)

Sensitivity:+4dBu input signal = 98dB SPL @ 1m

Max continuous :SPL109dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Max Peak SPL:121dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Directivity:H +/-50 degreesV +60/-40 degrees (-6dB off axis @10kHz)

Input:XLR switchable between analogue & digital AES3Analogue input- +20/+24dBu max. input level (selectable)- 22K ohm input impedanceDigital input- 16/24-bit AES3 signal, left, right or left + right- 18 – 192kHz Sample Rate- 110 ohm input impedanceExpansion card slot- For future connectivity upgrades

Output:XLR digital AES3 (fixed 24-bit @ 96kHz)

Network:RJ45 for use with PMC SoundAlign web interface

Features:Level Trim (+/-10dB)High-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS)Phase (normal or inverted)LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)User presets (3 + factory defaults)

Latency:2.4mS

Amplifier power per channel:LF 2 x 400WrmsMF 1 x 400WrmsHF 1 x 400Wrms

Mains:100 – 240VAC auto-switching, 50-60Hz (IEC C14)

Power consumption (idle):50W

Power consumption (max):1500W

Cabinet dimensions:H 400mm (15.7”)W 430mm (16.9”)D 372mm (14.6”)

Weight21.3kg (47lbs) each

Available Finishes:Studio black

PMC8-2 SUB SPECIFICATIONS

Type:Active subwoofer with twin 8-inch bass drivers and ATL bass loading

Drive Unit :ComplementLF PMC 200mm (8”) studio 8 driver

Effective ATL Length:3m (9.8ft)

Frequency Response:25Hz – 500Hz (- 3dB) (@1m full space, on-axis)

Sensitivity:+4dBu input signal = 98dB SPL @ 1m

Max continuous SPL:109dB @1m(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Max Peak SPL:121dB @1m(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)

Input:XLR switchable between analogue & digital AES3Analogue input- +20/+24dBu max. input level (selectable)- 22K ohm input impedanceDigital input- 16/24-bit AES3 signal, left, right or left + right- 18 – 192kHz ,Sample Rate- 110 ohm input impedance ,Expansion card slot- For future connectivity upgrades

Output:XLR digital :AES3 (fixed 24-bit @ 96kHz)

Network:RJ45 for use with PMC SoundAlign web interface

Features:Level Trim (+/-10dB)High-pass/Low-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS)Phase (normal or inverted)LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)User presets (3 + factory defaults)

Latency:2.4mS

Amplifier power per channel:300Wrms

Mains:100 – 240VAC auto-switching, 50-60Hz (IEC C14)

Power consumption (idle):25W

Power consumption (max):300W

Cabinet dimensionsH 266mm (10.5”)W 551mm (21.7”)D 440mm (17.3”)

Weight18.5kg (40.8lbs) each

Be the first to review “PMC 6-2 XBD Active Studio Monitor Pair”

Reviews

There are no reviews yet.

error: Content is protected !!

Main Menu

PMC 6-2 XBD Active Studio Monitor Pair

Call for Price

Add to Cart
×