No products in the cart.
Roll over image to zoom in
PMC 6-2 XBD Active Studio Monitor Pair
Call for Price
- Combines the PMC 6-2 midfield studio monitor with two PMC 8-2 Sub
- To create a powerful, full-range monitoring system with superior clarity and resolution.
- 3-way active, twin cabinet, mid-field reference monitor with ATL bass loading
- Frequency response: 25Hz – 25kHz (- 3dB @1m full space, on-axis)
- Optional dedicated 19” floor stands
- Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
PMC 6-2 XBD Active Studio Monitor Pair Overview:
The PMC 6-2 XBD System combines the PMC 6-2 midfield studio monitor with two PMC 8-2 Sub to create a powerful, full-range monitoring system with superior clarity and resolution.
The PMC 6-2 XBD system extends the frequency response down to 25Hz and increases headroom and clarity by reducing low-frequency load occurring in the midrange driver. The result is a more realistic sound and greater depth.
Configuration of the PMC 6-2 XBD is simple and consists of connecting the input to the PMC 6-2 studio monitors and linking the main speakers to the 8-2 subwoofer via the AES digital cable “through” output. Both cabinets can also be linked via LAN or chained together directly via their Network ports.
The XBD mode combines speakers and corresponding sub into a single large-scale full-range monitor. Additional DSP controls can also be accessed via the rear panel or via the SoundAlign software via a LAN connection. When linked, each speaker and relative sub appears as one PMC 6-2 XBD speaker in the software.
Combining a PMC 8-2 SUB unit with a PMC 6-2 monitor easily reconfigures them as PMC’s renowned and flexible twin-cabinet format PMC 6-2 XBD monitor system.
This system combines the PMC 6-2’s unrivalled clarity and resolution with an active sub to form a perfectly integrated full-range monitoring system that is ideal for all high-end music production.
In the case of the PMC 6-2, configuring it as an XBD system reinforces the bass output of the main speaker’s LF drivers, greatly increasing headroom and extending the bass down to 25Hz, creating a system with a sense of effortless capability.
Configuring the PMC 6-2 XBD system is to connect the input directly to the PMC 6-2, and add an AES3 digital cable to carry the main monitor’s ‘through’ output down to the PMC 8-2 SUB. The two cabinets can be connected either to a LAN or directly to each other via their network ports. When you select the dedicated ‘XBD’ mode the DSP seamlessly combines both units into a single, larger-scale monitor. Further detailed configuration can be carried out from the rear-panel controls or using the intuitive SoundAlign browser-based software via the LAN connection, where both speakers appear as a single PMC 6-2 XBD unit when linked.
The PMC 8 SUB can be used as a compact stand-alone subwoofer within conventional multichannel systems, or as an XBD cabinet, creating a full-range PMC 6-2 XBD midfield monitor. When used in this way, the dedicated ‘XBD’ DSP mode marries the speakers and sub unit together, creating a coherent full-range system. Our subs are also perfectly suited to use in multi-channel and immersive systems, as our ATL bass-loading technology provides a gentler low-order LF roll-off than conventional ported cabinets, allowing a smoother, seamless integration between the height and surround channels and the sub.
Features of PMC 6-2 XBD:
- Short Description: Combines the PMC 6-2 midfield studio monitor with two PMC 8-2 Sub to create a powerful, full-range monitoring system PMC 6-2 xbd with superior clarity and resolution.
- Powered, Passive: Powered
- Type: Nearfield
- HF Driver:1″
- LF Driver: Size8″
- Speaker Design: 2-way
- Ported: Transmission Line
- EQ Correction: No
Specifications of PMC6-2-XBD:
PMC 6-2 SPECIFICATIONS
Type: PMC 6-2 xbd is active 3-way nearfield reference monitor with ATL bass loading
Drive Unit Complement: LF 2 x PMC 150mm (6”) studio 6 drivers
MF PMC 55mm (2”) soft dome mid-range
HF PMC 27mm (1”) soft dome tweeter
Effective ATL Length:2m (6.6ft)
Frequency Response:33Hz – 25kHz (- 3dB) (@1m full space, on-axis)
Sensitivity:+4dBu input signal = 98dB SPL @ 1m
Max continuous :SPL109dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
Max Peak SPL:121dB @1m(Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
Directivity:H +/-50 degrees +60/-40 degrees (-6dB off-axis @10kHz)
Input: XLR switchable between analogue & digital AES3Analogue input- +20/+24dBu max. input level (selectable)- 22K ohm input impedance digital input- 16/24-bit AES3 signal, left, right or left + right- 18 – 192kHz Sample Rate- 110-ohm input impedanceExpansion card slot- For future connectivity upgrades
Output:XLR digital AES3 (fixed 24-bit @ 96kHz)
Network: RJ45 for use with PMC SoundAlign web interface
Features: Level Trim (+/-10dB)High-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS)Phase (normal or inverted)LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)User presets (3 + factory defaults)
Latency:2.4mS
Amplifier power per channel:LF 2 x 400WrmsMF 1 x 400WrmsHF 1 x 400Wrms
Mains:100 – 240VAC auto-switching, 50-60Hz (IEC C14)
Power consumption (idle):50W
Power consumption (max):1500W
Cabinet dimensions:H 400mm (15.7”)W 430mm (16.9”)D 372mm (14.6”)
Weight21.3kg (47lbs) each
Available Finishes: Studio black
PMC 8-2 SUB SPECIFICATIONS
Type: Active subwoofer with twin 8-inch bass drivers and ATL bass loading
Drive Unit: ComplementLF PMC 200mm (8”) studio 8 driver
Effective ATL Length:3m (9.8ft)
Frequency Response:25Hz – 500Hz (- 3dB) (@1m full space, on-axis)
Sensitivity:+4dBu input signal = 98dB SPL @ 1m
Max continuous SPL:109dB @1m(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
Max Peak SPL:121dB @1m(Quarter space value calculated as +3dB from half space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
Input: XLR switchable between analogue & digital AES3Analogue input- +20/+24dBu max. input level (selectable)- 22K ohm input impedance digital input- 16/24-bit AES3 signal, left, right or left + right- 18 – 192kHz, Sample Rate- 110-ohm input impedance, Expansion card slot- For future connectivity upgrades
Output:XLR digital :AES3 (fixed 24-bit @ 96kHz)
Network: RJ45 for use with PMC SoundAlign web interface
Features: Level Trim (+/-10dB)High-pass/Low-pass filter (20 – 200Hz, 12dB/Oct)Delay (0 – 30mS)Phase (normal or inverted)LF & HF shelving filters (20Hz – 20kHz, +/- 10dB, Q 0.707)Parametric EQ (5 bands, 20Hz – 20kHz, +/- 10dB)User presets (3 + factory defaults)
Latency:2.4mS
Amplifier power per channel:300Wrms
Mains:100 – 240VAC auto-switching, 50-60Hz (IEC C14)
Power consumption (idle):25W
Power consumption (max):300W
Cabinet dimensions: H 266mm (10.5”)W 551mm (21.7”)D 440mm (17.3”)
Weight18.5kg (40.8lbs) each
Reviews
There are no reviews yet.