No products in the cart.
-
ADAM Audio T8V 8-inch Powered Studio Monitor Single
- Vertical 2-way system with 8″ polypropylene woofer and U-ART tweeter.
- U-ART accelerated-ribbon tweeter with precision HPS waveguide.
- Large rear-firing bass reflex port.
- Highly efficient 90W Class D bi-amplification.
- Linear frequency response of 36Hz–25kHz.
₹38500₹45000ADAM Audio T8V 8-inch Powered Studio Monitor Single
₹38500₹45000 -
Adam Audio T7V Nearfield Powered Studio Monitor Single
- U-ART 1.9″ Accelerated Ribbon Tweeter with HPS Waveguide for precise high-frequency reproduction.
- 7″ Polypropylene woofer and rear-firing bass-reflex port for extended bass response.
- Cumulated Amp. Power RMS of 70W for ample power and clarity.
- Wide Frequency Response: 39 Hz – 25 kHz for accurate sound reproduction.
- Max. SPL Per Pair at 1 m: ≥110 dB for loud and clear monitoring.
₹29800₹35400 -
Adam Audio T5V Active Studio Monitor
- U-ART 1.9” Accelerated Ribbon Tweeter with HPS Waveguide
- 5” Polypropylene Woofer and Rear-Firing Bass-Reflex Port
- Cumulated Amplifier Power RMS: 70W
- Wide Frequency Response: 45 Hz – 25 kHz
- Impressive SPLs of up to 106 dB per pair
₹26000₹30400Adam Audio T5V Active Studio Monitor
₹26000₹30400 -
WesAudio ngBusComp Analog Bus Compressor with Digital Recall
- 100% analog device with +24dBu of headroom.
- Full digital control, automation, and recall via companion plug-in.
- Relative stereo channel linking with separate L/R settings.
- Mid-side operation for independent side and mid settings.
- Selectable output stages: normal (electronically balanced) and IRON (transformer balanced).
₹326900 -
WesAudio Prometheus 500 Series Stereo Analog Equalizer with Digital Recall
- Requires compatible 500 Series chassis/power supply (not standalone).
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis.
- Passive stereo/dual-mono/mid–side 2-band analog EQ.
- 6 touch-sensitive encoders allow for automation of each parameter.
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement.
- Knob movement is noiseless, allowing for full automation without side effects.
₹152500 -
WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer with Digital Recall
- Not standalone — requires compatible 500 Series chassis/power supply
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis
- Fully analog stereo/dual-mono/mid–side 4-band analog EQ with highpass filter and digital recall
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement
- Because knob movement causes no noise, full automation is feasible without side effects
₹151500 -
WesAudio MIMAS NG500 500 Series Analog Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like _TITAN or via USB connection
- 4 touch-sensitive encoders allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
- Compatible with any WesAudio NG500 chassis and many standard 500 series racks
₹157200 -
WesAudio DIONE NG500 500 Series Analog Bus Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like TITAN, or via USB connection
- 3 touch-sensitive encoders (Threshold, Mix, Make Up) allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path.
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
Call for Price -
Miktek HM4 4 Channel Monitor Headphone Amp
- 4-channel stereo headphone amplifier.
- 4 1/4″ stereo headphone outputs and 1 parallel 3.5mm jack for OUTPUT 4.
- Individual volume controls for each headphone output.
- 1/4″ Stereo INPUT jack for versatile connectivity.
- MONO switch for easy summing of line level input.
₹5517 -
Miktek HM2 2 Channel Monitor Headphone Amplifier
- Balanced XLR microphone INPUT
- Balanced XLR microphone THRU to link signal to the main mixer
- 1/4″ Stereo INPUT for feeding a stereo monitor signal from the main mixer
- 1/4″ Stereo MIX THRU for sending the same stereo signal to multiple units
- MONO switch for summing line level input
- MIC GAIN to set the microphone at a desired level
- MIX GAIN to control the level of stereo input signal
- Headphone outputs on 1/4″ & 3.5mm jack connectors
₹5517