No products in the cart.
-
WesAudio MIMAS NG500 500 Series Analog Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like _TITAN or via USB connection
- 4 touch-sensitive encoders allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
- Compatible with any WesAudio NG500 chassis and many standard 500 series racks
₹157200 -
WesAudio Prometheus 500 Series Stereo Analog Equalizer with Digital Recall
- Requires compatible 500 Series chassis/power supply (not standalone).
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis.
- Passive stereo/dual-mono/mid–side 2-band analog EQ.
- 6 touch-sensitive encoders allow for automation of each parameter.
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement.
- Knob movement is noiseless, allowing for full automation without side effects.
₹152500 -
WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer with Digital Recall
- Not standalone — requires compatible 500 Series chassis/power supply
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis
- Fully analog stereo/dual-mono/mid–side 4-band analog EQ with highpass filter and digital recall
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement
- Because knob movement causes no noise, full automation is feasible without side effects
₹151500 -
Pultec MEQ-500 500 Series Parametric Equalizer – Jack Douglas Edition
- 30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
- 30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
- 1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
- 5kHz, 10kHz shelf boost, 0–14dB
- 5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
- Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
- Input transformer: 600 ohms
- Output transformer: 600 ohms
₹111729 -
Cranborne Audio Carnaby 500 Series Harmonic EQ
- 3-band Harmonic EQ with 10dB boost/cut per band
- Unique harmonic saturation types in each band (LO/HI shelf, MID peak)
- Wireless OPTOSYNC linking for stereo operation
- +/-20dB input/output gain controls and 41-position detented pots
- Versatile for instruments, vocals, mixes, and masters.
₹55935₹56500Cranborne Audio Carnaby 500 Series Harmonic EQ
₹55935₹56500 -
Cranborne Audio Camden 500 Series Microphone Preamp
- Ultra-clean mic/line/instrument preamp with variable coloration
- 3-way input type switch optimizes impedance/headroom for Mic, Line, and hi-Z source
- Bypassable Mojo circuit with Thump/Cream analog saturation types
- Maximum Gain: Mic = 68dB, Line = 60dB, hi-Z = 63dB
- 48V phantom power switch
- Vintage, Warm, and Coloured
₹32890₹33225Cranborne Audio Camden 500 Series Microphone Preamp
₹32890₹33225 -
Pultec EQP-500X 500 Series Program Equalizer
- 30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
- 30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
- 1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
- 5kHz, 10kHz shelf boost, 0–14dB
- 5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
- Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
- Input transformer: 600 ohms
- Output transformer: 600 ohms
Call for PricePultec EQP-500X 500 Series Program Equalizer
Call for Price -
WesAudio DIONE NG500 500 Series Analog Bus Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like TITAN, or via USB connection
- 3 touch-sensitive encoders (Threshold, Mix, Make Up) allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path.
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
Call for Price