No products in the cart.
-
HiFiMan Sundara Over-ear Planar Magnetic Headphone
- HIFIMAN Sundara is ideal for audiophiles
- Headphone which gives Balanced Sound Signature
- Ideal for desktop use and metal made
- Open back design with planar magnetic drivers
- A pair of headphones with a replaceable cable has many benefits
₹23990₹28000HiFiMan Sundara Over-ear Planar Magnetic Headphone
₹23990₹28000 -
Antelope MRC Multichannel USB Remote Controller
- Designed for Galaxy 32 Synergy Core
- Multichannel monitoring System
- Tactile and straightforward monitoring workflow
- Seamless support for over 23 formats, from stereo to 9.1.6 Dolby Atmos
- Flexible 5-preset recall system at your fingertips
₹71999₹79999Antelope MRC Multichannel USB Remote Controller
₹71999₹79999 -
Antelope Audio Edge Solo Condenser Modeling Microphone
- 18 Iconic Microphones in one body
- Cardioid Polar Pattern
- 1.3″ Gold-Sputtered Capsule
- Models Vintage Cardioid Microphones
- 20 Hz to 20 kHz Frequency Response
- Included FPGA Native Emulations and hard Mount
- Included Case
₹49999 -
Antelope Edge Note Condenser Modeling Microphone
- 13 microphone emulations of classic microphone models
- Back-electret design provides transparent, balanced sound and accurate transient responses
- Cardioid polar pattern suitable for a wide variety of recording scenarios
- The frequency response of 20 Hz to 20 kHz covers the audible spectrum
- Signal-to-noise ratio of 69 dB
₹14999 -
Antelope Audio Zen Q Thunderbolt 3 Audio Interface
- Thunderbolt 3 Connectivity
- Ins: 2 Mic / Line / Hi-Z, 2 Line / Hi-Z
- Outs: 2 Headphone, 2 Monitor, 2 Line
- Up to 24-Bit / 192 kHz Resolution
- Bus Powered / Mac and Windows
- ADAT In and S/PDIF I/O for More Channels
- Color LCD, Onboard DSP, and FPGA Chips
₹69999₹89999Antelope Audio Zen Q Thunderbolt 3 Audio Interface
₹69999₹89999 -
Antelope Audio Orion Studio Synergy Core Thunderbolt/USB Audio Interface
- Rackmount audio interface with 12 discrete mic preamps that supports Thunderbolt 3 and USB
- Processing platform Synergy Core with two FPGA and six DSP chips
- Two monitor output pairs with a dynamic range of 130 dB operate simultaneously or in A/B mode.
- 30 concurrent inputs and 22 concurrent outputs
- DC-coupled I/O for analogue modular synths’ CV control
- crafted by hand in Europe to serve as the focal point of your professional studio for many years.
₹320999 -
Antelope Audio Zen Go Synergy Core 4×8 USB Audio Interface
- Antelope Zen Go is a bus-powered USB-C desktop interface packed with tech featured only in high-end professional studios, giving premium sound quality.
- 64-bit AFCTM clocking technology gives increased separation and sound width
- Class-leading AD/DA conversion for the most accurate music.
- Switchable mic, line, and Hi-Z modes with two discrete ultra-linear preamps with 65 dB gain
- Digitally expandable over S/PDIF
₹49900₹72000 -
IsoAcoustic Puck 76 ISO Puck Series Speaker Vibration Isolators
- Ideal for heavy guitar and bass cabinets and PA speakers.
- Enhances the sound of existing amps and speakers.
- Decouples speakers from supporting surfaces.
- Minimizes vibrational resonance into coupled surfaces and mic stands.
- Features a suction cup flange on top and bottom for secure mounting.
- Each pack includes 2 ISO-Puck 76 discs for a pair of speakers or equipment.
₹6490₹7100 -
WesAudio ngBusComp Analog Bus Compressor with Digital Recall
- 100% analog device with +24dBu of headroom.
- Full digital control, automation, and recall via companion plug-in.
- Relative stereo channel linking with separate L/R settings.
- Mid-side operation for independent side and mid settings.
- Selectable output stages: normal (electronically balanced) and IRON (transformer balanced).
₹326900 -
WesAudio Prometheus 500 Series Stereo Analog Equalizer with Digital Recall
- Requires compatible 500 Series chassis/power supply (not standalone).
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis.
- Passive stereo/dual-mono/mid–side 2-band analog EQ.
- 6 touch-sensitive encoders allow for automation of each parameter.
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement.
- Knob movement is noiseless, allowing for full automation without side effects.
₹152500 -
WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer with Digital Recall
- Not standalone — requires compatible 500 Series chassis/power supply
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis
- Fully analog stereo/dual-mono/mid–side 4-band analog EQ with highpass filter and digital recall
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement
- Because knob movement causes no noise, full automation is feasible without side effects
₹151500 -
WesAudio MIMAS NG500 500 Series Analog Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like _TITAN or via USB connection
- 4 touch-sensitive encoders allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
- Compatible with any WesAudio NG500 chassis and many standard 500 series racks
₹157200 -
WesAudio DIONE NG500 500 Series Analog Bus Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like TITAN, or via USB connection
- 3 touch-sensitive encoders (Threshold, Mix, Make Up) allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path.
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
Call for Price -
IsoAcoustics ISO-PUCK mini Isolator for Monitors(8 Piece Pack)
Weight capacity of 6 lbs per unit (18 lbs with 3 units, 24 lbs with 4 units).
Patented IsoAcoustics isolation for superior performance.
Energy management to reduce vibrations and dissonance.
Reduces internal reflections for a natural stereo sound.
Compact dimensions: 1.7″ wide x 0.9″ high.
Ideal for studio monitors on various surfaces.
Suction cup design for secure attachment.
Comes in a pack of 8 for multiple applications.₹8490₹9300 -
IsoAcoustics ISO 430 Stand for Studio Monitors – Single
- Dual-purpose design for both floor and desktop use.
- Suitable for studio monitors and amplifiers.
- Constructed from durable aluminum.
- Maximum height of 3.5 inches for optimal positioning.
₹9990₹11200 -
ISO 200 SUB
- Desktop subwoofer stand made of aluminum.
- Supports up to 75 lbs. of subwoofer weight.
- Maximum height of 5 inches.
- Compact design with a width of 7.8 inches and depth of 10 inches.
₹5990₹6500ISO 200 SUB
₹5990₹6500 -
IsoAcoustics ISO-200 Isolation Stands for Studio Monitors – Pair
- Floor/Desktop: Desktop
- Application: Studio Monitors
- Material: Aluminum
- Maximum Height: 8.75″
- Weight Limit: 60 lbs.
- Width: 7.8″
- Depth: 10″
₹15990₹17700 -
IsoAcoustics ISO-155 Isolation Stands for Studio Monitors – Pair
- Lets you properly position and isolate your monitors for more accurate performance
- Better focus and deeper, tighter bass
- Isolation-enhancing design
- Tilt adjustment
- Height adjustment
- Width: 6.1″
- Depth: 7.5″
₹10990₹12200