No products in the cart.
-
WesAudio ngBusComp Analog Bus Compressor with Digital Recall
- 100% analog device with +24dBu of headroom.
- Full digital control, automation, and recall via companion plug-in.
- Relative stereo channel linking with separate L/R settings.
- Mid-side operation for independent side and mid settings.
- Selectable output stages: normal (electronically balanced) and IRON (transformer balanced).
₹326900 -
WesAudio Prometheus 500 Series Stereo Analog Equalizer with Digital Recall
- Requires compatible 500 Series chassis/power supply (not standalone).
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis.
- Passive stereo/dual-mono/mid–side 2-band analog EQ.
- 6 touch-sensitive encoders allow for automation of each parameter.
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement.
- Knob movement is noiseless, allowing for full automation without side effects.
₹152500 -
WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer with Digital Recall
- Not standalone — requires compatible 500 Series chassis/power supply
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis
- Fully analog stereo/dual-mono/mid–side 4-band analog EQ with highpass filter and digital recall
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement
- Because knob movement causes no noise, full automation is feasible without side effects
₹151500 -
WesAudio MIMAS NG500 500 Series Analog Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like _TITAN or via USB connection
- 4 touch-sensitive encoders allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
- Compatible with any WesAudio NG500 chassis and many standard 500 series racks
₹157200 -
WesAudio DIONE NG500 500 Series Analog Bus Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like TITAN, or via USB connection
- 3 touch-sensitive encoders (Threshold, Mix, Make Up) allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path.
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
Call for Price -
Burl Audio B1D 500 Series Microphone Preamp with BX4 Iron Output Transformer
- BURL custom BX3 input transformer
- BURL custom BX4 iron output transformer
- Audiophile, discrete, Class A, direct-coupled, capacitor free circuit path
- Stepped gain control
- Independent output level control
- 70 dB gain
- Impedance select
- 1/4” front panel DI input
- 30 dB pad for hot signals and balanced line level input
Call for Price -
AEA RPQ500 – Series 2 Microphone Preamp
- One channel with 81dB of sweet and quiet JFET gain
- High-frequency CurveShaper™ EQ and low frequency proximity control
- Mic and line inputs for mixdown EQ versatility
- Switchable phantom power, polarity, line/mic
- NoLoad™ 10k Ohm high-impedance circuitry providing better overall transients, frequency response, and higher output sensitivity
- Made in the U.S.A.
Call for PriceAEA RPQ500 – Series 2 Microphone Preamp
Call for Price -
TK AUDIO S-BLENDER MINI MASTERING CONSOLE
- An internal, regulated power supply with a toroidal transformer and the ability to select between 115 and 230V.
- Features include gold-plated relays, a monitor section with volume control, and a mono-switch
- S-BLENDER UPDATE
- All controls are stepped
- Updated circuit for reduced noise.
- New, lighted in/out switch
- Mains on/off at the front
- Specifications: Solid State
₹126400 -
Miktek HM4 4 Channel Monitor Headphone Amp
- 4-channel stereo headphone amplifier.
- 4 1/4″ stereo headphone outputs and 1 parallel 3.5mm jack for OUTPUT 4.
- Individual volume controls for each headphone output.
- 1/4″ Stereo INPUT jack for versatile connectivity.
- MONO switch for easy summing of line level input.
₹5517 -
Miktek HM2 2 Channel Monitor Headphone Amplifier
- Balanced XLR microphone INPUT
- Balanced XLR microphone THRU to link signal to the main mixer
- 1/4″ Stereo INPUT for feeding a stereo monitor signal from the main mixer
- 1/4″ Stereo MIX THRU for sending the same stereo signal to multiple units
- MONO switch for summing line level input
- MIC GAIN to set the microphone at a desired level
- MIX GAIN to control the level of stereo input signal
- Headphone outputs on 1/4″ & 3.5mm jack connectors
₹5517