Vertical 2-way system with 8″ polypropylene woofer and U-ART tweeter.
U-ART accelerated-ribbon tweeter with precision HPS waveguide.
Large rear-firing bass reflex port.
Highly efficient 90W Class D bi-amplification.
Linear frequency response of 36Hz–25kHz.
₹ 38500₹ 45000
U-ART 1.9″ Accelerated Ribbon Tweeter with HPS Waveguide for precise high-frequency reproduction.
7″ Polypropylene woofer and rear-firing bass-reflex port for extended bass response.
Cumulated Amp. Power RMS of 70W for ample power and clarity.
Wide Frequency Response: 39 Hz – 25 kHz for accurate sound reproduction.
Max. SPL Per Pair at 1 m: ≥110 dB for loud and clear monitoring.
₹ 29800₹ 35400
U-ART 1.9” Accelerated Ribbon Tweeter with HPS Waveguide
5” Polypropylene Woofer and Rear-Firing Bass-Reflex Port
Cumulated Amplifier Power RMS: 70W
Wide Frequency Response: 45 Hz – 25 kHz
Impressive SPLs of up to 106 dB per pair
₹ 26000₹ 30400
16 x 16 I/O on balanced TRS
Front-panel stereo TRS Headphone jack
2 x 4 ADAT TOSlink optical ports
SFP port for optional expansion module
Optional Optical MADI I/O upgrade (SFP module available separately)
₹ 160700
Seamless Dante Network Integration: Connect via 2 x RJ-45 Ethernet connectors using CAT5/6 cables.
Built-In Brooklyn II Board: 64 x 64 channel capacity for Dante audio.
Intuitive Control: 4 x TFT screens provide complete control over analog I/O levels and unit settings.
High-Performance DSP: Equipped with powerful DSP for optimal audio performance and processing.
MIDI I/O: Offers MIDI over MADI and remote control capabilities.
Plug and Play: Easily integrates into Dante networks for hassle-free setup and configuration.
₹ 280243
All-passive circuitry for natural tone sculpting.
Unique Shelf curves using the “bandwidth” control.
Overlapping and interleaved frequency choices for precise shaping.
Each band switchable between shelf and bell modes.
Vacuum tube makeup gain and line drivers for warmth and clarity.
₹ 674842₹ 710360
SLAM means stereo limiter and microphone preamplifier
FET Limiters, Stereo Link, and VU Metering
No mic preamps or instrument inputs. Instead the tube sections are paralleled for lower noise and distortion
All pots are replaced with rotary switches for detented resettability and easier calibration
The mastering version has a true hard-wire bypass function, which is not possible on the regular version with mic preamps, etc. What was the Left Bypass, becomes the full Bypass (in stereo and hardwired). No separate L & R bypass buttons
Call for Price
Rotary switches with detented steps for precise channel matching and settings recall.
Switch steps constructed using 1% metal film resistors on sealed gold-contact Grayhill switches.
Manley input and output transformers featuring pure nickel laminations in mu-metal cases.
Flat frequency response spanning from 20Hz to 25kHz.
Balanced inputs and outputs for minimized noise and interference.
₹ 587404₹ 618320
Single-channel 500 Series saturator module.
Adds low-order harmonics and evens out the signal for a vintage tube console and tape recorder sound.
Increases RMS level, adding impact and punch to your audio.
LO SAFE option prevents low-frequency distortion, ideal for bass guitar, kick drum, and full mixes with prominent lows.
BAND SPLIT option allows selective saturation of low frequencies while preserving high-frequency clarity.
₹ 59885
Analog dynamics processor with compressor, limiter, and harmonics distortion capabilities.
Intuitive control panel without distracting meters for focused sound shaping.
Adds warmth, brightness, and character to audio with customizable DRIVE settings.
Vintage-inspired design with a FET transistor for subtle sound reduction and harmonics.
Two independent filters for precise timbre shaping without phase shifting.
₹ 74860