Neumann KH120 has fully documented extensive mounting hardware range
More flexibility in more diverse locations and backward compatibility to previous products
Easy, advanced planning for installations
Display dimmer and ground lift
₹ 206000
Neumann U87ai includes a large diaphragm FET condenser microphone and a pressure-gradient transducer with a double membrane capsule.
The studio microphone is traditional.
Three directional features: Omni, Cardioid, and Figure 8
Switchable low-frequency roll-off
Switchable 10 dB pre-attenuation.
₹ 272990₹ 289900
2 x 1/4″ Hi-Z Instrument/Line Inputs and 4 Line/Monitor Outputs, 2 Headphone Outs
24-Bit / 192 kHz AD/DA Conversion, Touchscreen UI, Mixing Console with DSP
4 Mixers, Talkback, Monitor Control
Pre-FX and Post-FX Recording and MIDI I/O, ADAT / S/PDIF, and AES67
Intuitive touchscreen user interface
DSP processing (EQ, dynamics, reverb)
4 independent mixers with integrated talkback
₹ 169900₹ 199000
All-passive circuitry for natural tone sculpting.
Unique Shelf curves using the “bandwidth” control.
Overlapping and interleaved frequency choices for precise shaping.
Each band switchable between shelf and bell modes.
Vacuum tube makeup gain and line drivers for warmth and clarity.
₹ 674842₹ 710360
SLAM means stereo limiter and microphone preamplifier
FET Limiters, Stereo Link, and VU Metering
No mic preamps or instrument inputs. Instead the tube sections are paralleled for lower noise and distortion
All pots are replaced with rotary switches for detented resettability and easier calibration
The mastering version has a true hard-wire bypass function, which is not possible on the regular version with mic preamps, etc. What was the Left Bypass, becomes the full Bypass (in stereo and hardwired). No separate L & R bypass buttons
Call for Price
Rotary switches with detented steps for precise channel matching and settings recall.
Switch steps constructed using 1% metal film resistors on sealed gold-contact Grayhill switches.
Manley input and output transformers featuring pure nickel laminations in mu-metal cases.
Flat frequency response spanning from 20Hz to 25kHz.
Balanced inputs and outputs for minimized noise and interference.
₹ 587404₹ 618320
4-channel stereo headphone amplifier.
4 1/4″ stereo headphone outputs and 1 parallel 3.5mm jack for OUTPUT 4.
Individual volume controls for each headphone output.
1/4″ Stereo INPUT jack for versatile connectivity.
MONO switch for easy summing of line level input.
₹ 5517
Balanced XLR microphone INPUT
Balanced XLR microphone THRU to link signal to the main mixer
1/4″ Stereo INPUT for feeding a stereo monitor signal from the main mixer
1/4″ Stereo MIX THRU for sending the same stereo signal to multiple units
MONO switch for summing line level input
MIC GAIN to set the microphone at a desired level
MIX GAIN to control the level of stereo input signal
Headphone outputs on 1/4″ & 3.5mm jack connectors
₹ 5517