No products in the cart.
Roll over image to zoom in
Focal Alpha 80 Evo 8-inch Powered Studio Monitor
₹139336₹146670 (-5%)
- The line’s flagship monitoring loudspeaker, the Alpha 80, is best suited for producing music with lots of bass or large power reserves.
- Midrange speaker with a Polyglass cone loaded in a large laminar port
- Damping and rigidity: impartiality, absence of distortion
- The tonal balance remains constant between high and low levels, with minimal susceptibility to wall effects.
- Reduced directivity: maintains a consistent sound throughout the space
Focal’s Next-gen Alpha 80 Evo
We at Pro Audio are thrilled to introduce to you the next generation of monitors from Focal’s Alpha series. The Alpha 80 Evo design pushes the boundaries of studio monitoring by utilising state-of-the-art engineering and materials. This small active 2-way monitor was designed and manufactured by Focal in their Saint-Étienne, France plant. It uses an 8-inch woofer with a Slatefiber cone and a 1-inch aluminium tweeter. With a 115-watt Class D bi-amplification power source and a flat tonal balance and exceptional dynamic range, the Alpha 80 Evo boasts superior performance compared to its predecessor, the Alpha monitor. The durable, adaptable Focal Alpha 80 Evo speaker system will blend in with your contemporary production space and offer the truthful, precise monitoring you
You can trust Focal monitors
Focal’s Alpha 80 Evo 2 way active studio monitor is designed to reproduce your audio signal with unwavering accuracy thanks to its extended frequency response and excellent imaging. Beyond its outstanding performance, however, this monitor is made to integrate easily and adaptably into your studio. In addition to balanced XLR, TRS, and unbalanced RCA inputs, the Alpha 80 Evo has rear-panel HF/LF shelving to optimise the system for any acoustic setting. It also includes the convenient energy-saving feature of Focal’s automatic sleep mode, which turns off the power after 30 minutes of inactivity. ‘s engineers depend on Focal monitors to provide them with accurate recording information. You are also able to trust them.
Unerring accuracy, outstanding performance
The new Slatefiber LF driver is the brains behind the Alpha 80 Evo.When comparing the Alpha 80 Evo to its Alpha series predecessor, the unique properties of the Slatefiber material utilised for the cone have significantly increased the low frequency extension, dynamic range, and sheer impact. Additionally, the 1inch aluminium inverted dome tweeter has been modified to precisely express even the smallest details in playback material without causing any harshness or listening fatigue, which is a common problem with many high-definition tweeter designs.
Focal Alpha 80 Evo 8-inch Powered Studio Monitor Features:
- Optimized LF extension, dynamic range, and sheer impact
- Frequency response: 38Hz–22kHz (+/- 3dB)
- Maximum SPL: 106dB SPL (peak @ 1 m)
- Mid-/low-frequency amplifier: 80W, Class D
- High-frequency amplifier: 35W, Class D
- Wide dispersion for accurate sound throughout the room
- HF/LF shelving optimizes the system for any acoustic environment
- Slatefiber cone handcrafted in France: sonic neutrality, no distortion
- Identical tonal balance at both low and high volume
Important Points:
- Reduced directivity: maintains a consistent sound throughout the space Damping and rigidity: impartiality, absence of distortion
- The tonal balance remains constant between high and low levels, with minimal susceptibility to wall effects.
- Link two or more audio sources.
- Optimal blending of sounds
- Decreased energy usage
Specifications
- Frequency response (+/- 3dB): 35Hz – 22kHz
- 140W of Power (100W+40W)
- SPL Maximum: 109dB SPL (picture @ 1m)
Electronic section
- Inputs Connectors: XLR balanced 10kOhms RCA unbalanced 10kOhms with sensitivity compensation
- LF amplifier stage: class AB, 100W
- Stage A HF amplifier: 40W, class A
- In standby mode In reserve
- Turning on the watch:After not using the monitor for roughly thirty minutes Using signal detection >3 mV
- Power supply: 220-240V (fuse T1.6AL/250V) or 100-120V (fuse T3.15AL/250V) (the voltage cannot be changed).
- IEC inlet and detachable power cord connection
User controls
- Sensitivity: Adjustable, 0 or +6dB
- LF shelving (0 – 300Hz): Adjustable, +/-6dB
- HF shelving (4.5 – 22kHz): Adjustable, +/-3dB
- Power ON/OFF: Switch on rear panel
- Standby mode power consumption: < 0,5W
- Indicators: Power ON/OFF LED – Standby LED
Transducers
- Woofer: 8″ (21cm) drive unit – Polyglass cone
- Tweeter: 1″ (25mm) drive unit. Aluminium inverted dome
Cabinet
- Construction: 0.6″ (15mm) MDF
- Finish: Vinyl and Black painting
- Dimensions with 4 rubber pads (HxWxD): 15.6×11.3×13.7″ (397 x 287 x 348mm)
- Weight: 28.2lb (12.8kg)
Additional information
Powered | Yes |
---|---|
Power Configuration | Bi-amped |
Quantity | Single |
LF Driver Size | 8" Woofer |
LF Driver Type | Slatefiber Cone |
HF Driver Size | 1" Tweeter |
HF Driver Type | Aluminum Inverted Dome |
LF Driver Power Amp | 80W |
HF Driver Power Amp | 35W |
Total Power | 115W Class D |
Frequency Response | 38Hz-22kHz |
Maximum Peak SPL | 106 dB SPL @ 1m |
Input Types | 1 x XLR, 1 x RCA, 1 x 1/4" TRS |
Features | High/Low Frequency Boost/Cut, Sensitivity Switch, Auto Standby Mode |
Enclosure Type | Front Ported |
Enclosure Material | Solid MDF wood cabinet with black vinyl wrap |
Height | 15.35" |
Width | 11.65" |
Depth | 13" |
Weight | 21.6 lbs. |
Reviews
There are no reviews yet.