“Beyerdynamic DT 700 Pro X Closed-back Studio Mixing Headphones” already exists in your wishlist
3-way ATL active reference monitor
Frequency response: 20Hz–25kHz
Custom triamplifaction: HF 275W, MF 550W, LF 1200W
Maximum SPL: 126dB @ 1m
Effective ATL length: 3 meters
Crossover frequencies: 380Hz, 3.8kHz
Call for Price
3-way ATL active reference monitor with separate subwoofer cabinet
Frequency response: 20Hz-25kHz
Custom triamplifaction: 3225W (HF 275W, MF 550W, LF/LFX 2400W)
Effective ATL length: 2 x 3 meters
Maximum SPL: 129dB
Call for Price
Type: 3-way ATL dynamic reference monitor.
Frequency response: 17Hz-25kHz
Force per channel: 3225W (HF 275W, MF 550W, LF 2400W)
Compelling ATL length: 4 meters
Greatest SPL: 128dB
Call for Price
Type: 3-way ATL™ dynamic reference screen
Recurrence reaction: 17Hz-25kHz
Force per channel: 5625W (HF 275W, MF 550W, 2 x LF 2400W)
Compelling ATL™ length: 2
Call for Price
Compact true reference monitors with ATL bass-loading technology
Powerful DSP engine controls driver response, crossover, and EQ
Input impedance: 20kΩ balanced
Sensitivity: adjustable from +4 to +15dBu
Inputs: balanced analog XLR, unbalanced RCA; digital AES XLR
Included IEC mains power cable, RJ45 control link cable, 4 M8 glide feet, 4 D-cup isolators
Call for Price
Compact true reference monitors with ATL bass-loading technology
Ultra-wide dispersion for a spacious image with perfect tonal balance over a large soundfield
Class-leading connectivity, analog plus digital up to 192kHz
High-efficiency audiophile-grade dual Class D amplification
Versatile positioning for unerring accuracy in both vertical and horizontal orientation
Precision drivers designed and built by PMC for superior neutrality and dynamics
Call for Price
Available Finishes: Neo Black
Crossover Frequency: 380Hz & 3.8kHz
Dimensions: H 1040mm 40.94″ W 432mm 17.01″ D 790mm 31.10″
Effective ATL™ Length: 4m 13feet
Impedance: 4 Ohm nominal
Call for Price
Compact, 2-way active monitor designs, employing unique technology in the form of PMC’s ATL design
ATL improves more than just the bass response: because the low end is clean and clear
Deeper,Clearer bass from a smaller cabinet
Advanced Transmission Line (ATL) bass-loading technology, professionally proven all around the world.
Call for Price
1 x Pair of PMC IB1S-AIII Active Monitors (L/R)
1 x PMC IB1 SACIII (C)
2 x PMC Twotwo.SUB2 Active Subwoofer (S)
8 x ci45 custom install speakers (Surrounds/Overheads)
1 x Linea 88 C03 (Amp for ci45)
Call for Price
The 8424 is designed to connect to and utilize all instruments and outboard equipment
2 x 500 series slots for internal expansion options
Two Inputs Per Channel – Seamlessly switch from Mix to Record Inputs at the push of a button
Third channel strip Input for dual-layer use
Mix up to 48 Mono Signals at once
Call for Price
Source selectable between Mix bus, Record bus and Monitor (pre level control) signals
Connections: S/PDIF (TosLink optical) and AES-3 (male XLR). Signal available on both connectors at all times
Sample rate – locks to selected digital input up to a maximum sample rate of 192kHz. In the absence of a valid digital input defaults to
Dynamic range typically 116dB A-weighted, 111dB un-weighted. Worst case 109dB un-weighted
THD < 0.001%
0dBFs switchable between +18dBu and +24dBu
Call for Price
16 dual-input mono line inputs channels with 100mm faders
4 stereo line-input channels with 100mm stereo faders
Tricolor signal-level indication LED on every channel
Phase invert switch
CUE Stereo section, switchable between pre and post fader on each channel
Direct Channel Output switchable between pre and post fader on each channel
Call for Price
HPF—18dB/Octave high-pass filter with detente bypass position
G-EQ Curve switch—toggles between the default E-Series and G-Series tonal characteristics and control interaction
HF—High-frequency shelving equalizer switchable to fixed Q parametric response via the Bell switch
Call for Price
Direct access to all major DAW mixing, editing and automation parameters via HUI and MCU protocols
Direct control of plug-in settings
Dedicated control processor to maximize console performance
Integral color TFT display with dedicated control keys
Call for Price
All fader moves are captured and played with the same accuracy as any other DAW automation parameter – moves are no longer quantized to Timecode frames and sub-frames
True 10-bit fader resolution
LMF—Low-frequency parametric mid-band EQ
LF—Low-frequency shelving EQ Switchable to fixed Q parametric response via the Bell switch
Call for Price
Split Signal Flow Channel Architecture: Unique dual path channel architecture provides unrivaled flexibility for placing processing in the record/monitor paths.
Flexible Bussing: 3 stereo mix busses and 24 track busses for flexible routing. Internal busing feature allows patch-free sub groups by allowing channels inputs to be sourced from track bus outputs.
A range of frame sizes: Available in 24, 48, 72 & 96 fader configurations, expandable in bays of 24 (up to 96) and with producer and patch options.
Call for Price