“Focusrite Clarett 8Pre X 26x28 Thunderbolt Audio Interface” was added to the compare list
-
- 3-way ATL active reference monitor
- Frequency response: 20Hz–25kHz
- Custom triamplifaction: HF 275W, MF 550W, LF 1200W
- Maximum SPL: 126dB @ 1m
- Effective ATL length: 3 meters
- Crossover frequencies: 380Hz, 3.8kHz
Call for Price
-
- 3-way ATL active reference monitor with separate subwoofer cabinet
- Frequency response: 20Hz-25kHz
- Custom triamplifaction: 3225W (HF 275W, MF 550W, LF/LFX 2400W)
- Effective ATL length: 2 x 3 meters
- Maximum SPL: 129dB
Call for Price
-
- Type: 3-way ATL dynamic reference monitor.
- Frequency response: 17Hz-25kHz
- Force per channel: 3225W (HF 275W, MF 550W, LF 2400W)
- Compelling ATL length: 4 meters
- Greatest SPL: 128dB
Call for Price
-
- Type: 3-way ATL™ dynamic reference screen
- Recurrence reaction: 17Hz-25kHz
- Force per channel: 5625W (HF 275W, MF 550W, 2 x LF 2400W)
- Compelling ATL™ length: 2
Call for Price
-
- Compact true reference monitors with ATL bass-loading technology
- Powerful DSP engine controls driver response, crossover, and EQ
- Input impedance: 20kΩ balanced
- Sensitivity: adjustable from +4 to +15dBu
- Inputs: balanced analog XLR, unbalanced RCA; digital AES XLR
- Included IEC mains power cable, RJ45 control link cable, 4 M8 glide feet, 4 D-cup isolators
Call for Price
-
- Compact true reference monitors with ATL bass-loading technology
- Ultra-wide dispersion for a spacious image with perfect tonal balance over a large soundfield
- Class-leading connectivity, analog plus digital up to 192kHz
- High-efficiency audiophile-grade dual Class D amplification
- Versatile positioning for unerring accuracy in both vertical and horizontal orientation
- Precision drivers designed and built by PMC for superior neutrality and dynamics
Call for Price
-
-
- Available Finishes: Neo Black
- Crossover Frequency: 380Hz & 3.8kHz
- Dimensions: H 1040mm 40.94″ W 432mm 17.01″ D 790mm 31.10″
- Effective ATL™ Length: 4m 13feet
- Impedance: 4 Ohm nominal
Call for Price
-
- Compact, 2-way active monitor designs, employing unique technology in the form of PMC’s ATL design
- ATL improves more than just the bass response: because the low end is clean and clear
- Deeper,Clearer bass from a smaller cabinet
- Advanced Transmission Line (ATL) bass-loading technology, professionally proven all around the world.
Call for Price
-
- 1 x Pair of PMC IB1S-AIII Active Monitors (L/R)
- 1 x PMC IB1 SACIII (C)
- 2 x PMC Twotwo.SUB2 Active Subwoofer (S)
- 8 x ci45 custom install speakers (Surrounds/Overheads)
- 1 x Linea 88 C03 (Amp for ci45)
Call for Price
-
-
-
-
- The 8424 is designed to connect to and utilize all instruments and outboard equipment
- 2 x 500 series slots for internal expansion options
- Two Inputs Per Channel – Seamlessly switch from Mix to Record Inputs at the push of a button
- Third channel strip Input for dual-layer use
- Mix up to 48 Mono Signals at once
Call for Price
-
- Source selectable between Mix bus, Record bus and Monitor (pre level control) signals
- Connections: S/PDIF (TosLink optical) and AES-3 (male XLR). Signal available on both connectors at all times
- Sample rate – locks to selected digital input up to a maximum sample rate of 192kHz. In the absence of a valid digital input defaults to
- Dynamic range typically 116dB A-weighted, 111dB un-weighted. Worst case 109dB un-weighted
- THD < 0.001%
- 0dBFs switchable between +18dBu and +24dBu
Call for Price
-
- 16 dual-input mono line inputs channels with 100mm faders
- 4 stereo line-input channels with 100mm stereo faders
- Tricolor signal-level indication LED on every channel
- Phase invert switch
- CUE Stereo section, switchable between pre and post fader on each channel
- Direct Channel Output switchable between pre and post fader on each channel
Call for Price
-
- HPF—18dB/Octave high-pass filter with detente bypass position
- G-EQ Curve switch—toggles between the default E-Series and G-Series tonal characteristics and control interaction
- HF—High-frequency shelving equalizer switchable to fixed Q parametric response via the Bell switch
Call for Price
-
- Direct access to all major DAW mixing, editing and automation parameters via HUI and MCU protocols
- Direct control of plug-in settings
- Dedicated control processor to maximize console performance
- Integral color TFT display with dedicated control keys
Call for Price
-
- All fader moves are captured and played with the same accuracy as any other DAW automation parameter – moves are no longer quantized to Timecode frames and sub-frames
- True 10-bit fader resolution
- LMF—Low-frequency parametric mid-band EQ
- LF—Low-frequency shelving EQ Switchable to fixed Q parametric response via the Bell switch
Call for Price
-
- Split Signal Flow Channel Architecture: Unique dual path channel architecture provides unrivaled flexibility for placing processing in the record/monitor paths.
- Flexible Bussing: 3 stereo mix busses and 24 track busses for flexible routing. Internal busing feature allows patch-free sub groups by allowing channels inputs to be sourced from track bus outputs.
- A range of frame sizes: Available in 24, 48, 72 & 96 fader configurations, expandable in bays of 24 (up to 96) and with producer and patch options.
Call for Price