No products in the cart.
-
Barefoot Sound MicroMain27 Gen2 10 Inch Active Studio Monitor
- The MicroMain 27 is a huge and uncommon nearfield monitor with remarkable bass extension and fidelity.
- Excellent transient detail, mid-range resolution, and bass timing.
- High SPL capabilities while maintaining spectral balance at low levels.
- 4 setting DSP voice emulation
- Analog and AES3 digital inputs and Hypex amplification
₹1099500 -
Barefoot Sound MicroMain45 Gen 2 Studio Monitor Pair
- MicroMain45 is a three-way active monitor. Controls include an input level stepped attenuator and a voice choice for Multi-Emphasis Monitor Emulation.
- 610W Active Studio Monitor Pair with 8″ Subwoofer, Dual 2.5″ MF Drivers, and 1″ HF Driver
- An 8-inch aluminum cone subwoofer creates tight, powerful low-end all the way down.
- All Barefoot Sound studio monitors include multi-emphasis Monitor
- Emulation, or MEME technology,. The MM45s have a very wide sweet spot for consistent sound in any position.
₹624500 -
WesAudio ngBusComp Analog Bus Compressor with Digital Recall
- 100% analog device with +24dBu of headroom.
- Full digital control, automation, and recall via companion plug-in.
- Relative stereo channel linking with separate L/R settings.
- Mid-side operation for independent side and mid settings.
- Selectable output stages: normal (electronically balanced) and IRON (transformer balanced).
₹326900 -
WesAudio MIMAS NG500 500 Series Analog Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like _TITAN or via USB connection
- 4 touch-sensitive encoders allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
- Compatible with any WesAudio NG500 chassis and many standard 500 series racks
₹157200 -
WesAudio Prometheus 500 Series Stereo Analog Equalizer with Digital Recall
- Requires compatible 500 Series chassis/power supply (not standalone).
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis.
- Passive stereo/dual-mono/mid–side 2-band analog EQ.
- 6 touch-sensitive encoders allow for automation of each parameter.
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement.
- Knob movement is noiseless, allowing for full automation without side effects.
₹152500 -
WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer with Digital Recall
- Not standalone — requires compatible 500 Series chassis/power supply
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis
- Fully analog stereo/dual-mono/mid–side 4-band analog EQ with highpass filter and digital recall
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement
- Because knob movement causes no noise, full automation is feasible without side effects
₹151500 -
Miktek HM4 4 Channel Monitor Headphone Amp
- 4-channel stereo headphone amplifier.
- 4 1/4″ stereo headphone outputs and 1 parallel 3.5mm jack for OUTPUT 4.
- Individual volume controls for each headphone output.
- 1/4″ Stereo INPUT jack for versatile connectivity.
- MONO switch for easy summing of line level input.
₹5517 -
Miktek HM2 2 Channel Monitor Headphone Amplifier
- Balanced XLR microphone INPUT
- Balanced XLR microphone THRU to link signal to the main mixer
- 1/4″ Stereo INPUT for feeding a stereo monitor signal from the main mixer
- 1/4″ Stereo MIX THRU for sending the same stereo signal to multiple units
- MONO switch for summing line level input
- MIC GAIN to set the microphone at a desired level
- MIX GAIN to control the level of stereo input signal
- Headphone outputs on 1/4″ & 3.5mm jack connectors
₹5517 -
WesAudio DIONE NG500 500 Series Analog Bus Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like TITAN, or via USB connection
- 3 touch-sensitive encoders (Threshold, Mix, Make Up) allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path.
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
Call for Price