No products in the cart.
-
Barefoot Sound MicroMain27 Gen2 10 Inch Active Studio Monitor
- The MicroMain 27 is a huge and uncommon nearfield monitor with remarkable bass extension and fidelity.
- Excellent transient detail, mid-range resolution, and bass timing.
- High SPL capabilities while maintaining spectral balance at low levels.
- 4 setting DSP voice emulation
- Analog and AES3 digital inputs and Hypex amplification
₹1099500 -
Barefoot Sound MicroMain45 Gen 2 Studio Monitor Pair
- MicroMain45 is a three-way active monitor. Controls include an input level stepped attenuator and a voice choice for Multi-Emphasis Monitor Emulation.
- 610W Active Studio Monitor Pair with 8″ Subwoofer, Dual 2.5″ MF Drivers, and 1″ HF Driver
- An 8-inch aluminum cone subwoofer creates tight, powerful low-end all the way down.
- All Barefoot Sound studio monitors include multi-emphasis Monitor
- Emulation, or MEME technology,. The MM45s have a very wide sweet spot for consistent sound in any position.
₹624500 -
Pultec MEQM-5: Amazing Mastering Midrange Equalizer
- Classic vintage charm from the original Pultecs with the assurance of modern engineering.
- Achieving a pristine and pure sound with an exceptionally low noise floor.
- Effortlessly recall settings using the user-friendly 21-position stepped switches.
- Unleash the full potential of guitars, vocals, woodwinds, and other midrange-rich elements with this outstanding EQ.
- Discover new realms of creativity through the versatility of separate boost and cut bands.
Call for PricePultec MEQM-5: Amazing Mastering Midrange Equalizer
Call for Price -
IsoAcoustic Puck 76 ISO Puck Series Speaker Vibration Isolators
- Ideal for heavy guitar and bass cabinets and PA speakers.
- Enhances the sound of existing amps and speakers.
- Decouples speakers from supporting surfaces.
- Minimizes vibrational resonance into coupled surfaces and mic stands.
- Features a suction cup flange on top and bottom for secure mounting.
- Each pack includes 2 ISO-Puck 76 discs for a pair of speakers or equipment.
₹6490₹7100 -
WesAudio ngBusComp Analog Bus Compressor with Digital Recall
- 100% analog device with +24dBu of headroom.
- Full digital control, automation, and recall via companion plug-in.
- Relative stereo channel linking with separate L/R settings.
- Mid-side operation for independent side and mid settings.
- Selectable output stages: normal (electronically balanced) and IRON (transformer balanced).
₹326900 -
Pultec MEQ-500 500 Series Parametric Equalizer – Jack Douglas Edition
- 30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
- 30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
- 1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
- 5kHz, 10kHz shelf boost, 0–14dB
- 5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
- Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
- Input transformer: 600 ohms
- Output transformer: 600 ohms
₹111729 -
Pultec EQP-500X 500 Series Program Equalizer
- 30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
- 30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
- 1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
- 5kHz, 10kHz shelf boost, 0–14dB
- 5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
- Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
- Input transformer: 600 ohms
- Output transformer: 600 ohms
Call for PricePultec EQP-500X 500 Series Program Equalizer
Call for Price -
WesAudio Prometheus 500 Series Stereo Analog Equalizer with Digital Recall
- Requires compatible 500 Series chassis/power supply (not standalone).
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis.
- Passive stereo/dual-mono/mid–side 2-band analog EQ.
- 6 touch-sensitive encoders allow for automation of each parameter.
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement.
- Knob movement is noiseless, allowing for full automation without side effects.
₹152500 -
WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer with Digital Recall
- Not standalone — requires compatible 500 Series chassis/power supply
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis
- Fully analog stereo/dual-mono/mid–side 4-band analog EQ with highpass filter and digital recall
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement
- Because knob movement causes no noise, full automation is feasible without side effects
₹151500 -
WesAudio MIMAS NG500 500 Series Analog Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like _TITAN or via USB connection
- 4 touch-sensitive encoders allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
- Compatible with any WesAudio NG500 chassis and many standard 500 series racks
₹157200 -
WesAudio DIONE NG500 500 Series Analog Bus Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like TITAN, or via USB connection
- 3 touch-sensitive encoders (Threshold, Mix, Make Up) allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path.
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
Call for Price -
Burl Audio B1D 500 Series Microphone Preamp with BX4 Iron Output Transformer
- BURL custom BX3 input transformer
- BURL custom BX4 iron output transformer
- Audiophile, discrete, Class A, direct-coupled, capacitor free circuit path
- Stepped gain control
- Independent output level control
- 70 dB gain
- Impedance select
- 1/4” front panel DI input
- 30 dB pad for hot signals and balanced line level input
Call for Price -
IsoAcoustics ISO-PUCK mini Isolator for Monitors(8 Piece Pack)
Weight capacity of 6 lbs per unit (18 lbs with 3 units, 24 lbs with 4 units).
Patented IsoAcoustics isolation for superior performance.
Energy management to reduce vibrations and dissonance.
Reduces internal reflections for a natural stereo sound.
Compact dimensions: 1.7″ wide x 0.9″ high.
Ideal for studio monitors on various surfaces.
Suction cup design for secure attachment.
Comes in a pack of 8 for multiple applications.₹8490₹9300 -
IsoAcoustics ISO 430 Stand for Studio Monitors – Single
- Dual-purpose design for both floor and desktop use.
- Suitable for studio monitors and amplifiers.
- Constructed from durable aluminum.
- Maximum height of 3.5 inches for optimal positioning.
₹9990₹11200 -
ISO 200 SUB
- Desktop subwoofer stand made of aluminum.
- Supports up to 75 lbs. of subwoofer weight.
- Maximum height of 5 inches.
- Compact design with a width of 7.8 inches and depth of 10 inches.
₹5990₹6500ISO 200 SUB
₹5990₹6500 -
IsoAcoustics ISO-200 Isolation Stands for Studio Monitors – Pair
- Floor/Desktop: Desktop
- Application: Studio Monitors
- Material: Aluminum
- Maximum Height: 8.75″
- Weight Limit: 60 lbs.
- Width: 7.8″
- Depth: 10″
₹15990₹17700 -
IsoAcoustics ISO-155 Isolation Stands for Studio Monitors – Pair
- Lets you properly position and isolate your monitors for more accurate performance
- Better focus and deeper, tighter bass
- Isolation-enhancing design
- Tilt adjustment
- Height adjustment
- Width: 6.1″
- Depth: 7.5″
₹10990₹12200 -
IsoAcoustics ISO-130 Small Monitor Stand – Pair
- Floor/Desktop: Desktop
- Application: Studio Monitors
- Material: Aluminum
- Maximum Height: 8″
- Weight Limit: 20 lbs.
- Width: 5.1″
- Depth: 6″
₹9490₹10300IsoAcoustics ISO-130 Small Monitor Stand – Pair
₹9490₹10300