All-passive circuitry for natural tone sculpting.
Unique Shelf curves using the “bandwidth” control.
Overlapping and interleaved frequency choices for precise shaping.
Each band switchable between shelf and bell modes.
Vacuum tube makeup gain and line drivers for warmth and clarity.
₹ 674842₹ 710360
SLAM means stereo limiter and microphone preamplifier
FET Limiters, Stereo Link, and VU Metering
No mic preamps or instrument inputs. Instead the tube sections are paralleled for lower noise and distortion
All pots are replaced with rotary switches for detented resettability and easier calibration
The mastering version has a true hard-wire bypass function, which is not possible on the regular version with mic preamps, etc. What was the Left Bypass, becomes the full Bypass (in stereo and hardwired). No separate L & R bypass buttons
Call for Price
Rotary switches with detented steps for precise channel matching and settings recall.
Switch steps constructed using 1% metal film resistors on sealed gold-contact Grayhill switches.
Manley input and output transformers featuring pure nickel laminations in mu-metal cases.
Flat frequency response spanning from 20Hz to 25kHz.
Balanced inputs and outputs for minimized noise and interference.
₹ 587404₹ 618320
Five selectable polar patterns: figure-8, supercardioid, cardioid, omnidirectional, and custom.
Microprocessor-controlled polarization voltages for precision.
Analog highpass filters: Choose from 40Hz, 80Hz, and 160Hz.
10dB and 20dB analog pads for handling high-volume sources.
Dual outputs for independent recording of each diaphragm.
₹ 107682₹ 113350
Matched pair of large-diaphragm condenser microphones.
Cardioid polar pattern for focused sound capture.
Handmade 1″ ceramic capsule for precise audio reproduction.
Selectable pad at -10 or -20 dB for handling high sound pressure.
₹ 67849₹ 71420
Single-channel 500 Series saturator module.
Adds low-order harmonics and evens out the signal for a vintage tube console and tape recorder sound.
Increases RMS level, adding impact and punch to your audio.
LO SAFE option prevents low-frequency distortion, ideal for bass guitar, kick drum, and full mixes with prominent lows.
BAND SPLIT option allows selective saturation of low frequencies while preserving high-frequency clarity.
₹ 59885
Analog dynamics processor with compressor, limiter, and harmonics distortion capabilities.
Intuitive control panel without distracting meters for focused sound shaping.
Adds warmth, brightness, and character to audio with customizable DRIVE settings.
Vintage-inspired design with a FET transistor for subtle sound reduction and harmonics.
Two independent filters for precise timbre shaping without phase shifting.
₹ 74860
4-channel stereo headphone amplifier.
4 1/4″ stereo headphone outputs and 1 parallel 3.5mm jack for OUTPUT 4.
Individual volume controls for each headphone output.
1/4″ Stereo INPUT jack for versatile connectivity.
MONO switch for easy summing of line level input.
₹ 5517
Balanced XLR microphone INPUT
Balanced XLR microphone THRU to link signal to the main mixer
1/4″ Stereo INPUT for feeding a stereo monitor signal from the main mixer
1/4″ Stereo MIX THRU for sending the same stereo signal to multiple units
MONO switch for summing line level input
MIC GAIN to set the microphone at a desired level
MIX GAIN to control the level of stereo input signal
Headphone outputs on 1/4″ & 3.5mm jack connectors
₹ 5517