Neumann KH120 has fully documented extensive mounting hardware range
More flexibility in more diverse locations and backward compatibility to previous products
Easy, advanced planning for installations
Display dimmer and ground lift
₹ 206000
Neumann U87ai includes a large diaphragm FET condenser microphone and a pressure-gradient transducer with a double membrane capsule.
The studio microphone is traditional.
Three directional features: Omni, Cardioid, and Figure 8
Switchable low-frequency roll-off
Switchable 10 dB pre-attenuation.
₹ 272990₹ 289900
On-board drum recording and MIDI out
Drum throne and the kick pedal are not Included
Acoustic Drums/Cymbals (Stereo), Percussion (Stereo), eKick/eSnare, and Attack Elements are the instruments.
Dual-sensor kick drum pad for single or double beater(s)
Ideal for daily exercise, instruction, recording, and small performances
Tru-Aco sound technology provides realistic acoustic drum and cymbal sounds
₹ 216130₹ 218148
4-piece cymbal set and 6-piece shell set, includes the real hi-hat, bigger cymbals and high-sensitivity drum pads.
Bluetooth audio-in provides you to play along with Spotify™ / YouTube™ with your smartphone
Tru-Motion™ technology for expressiveness leap
The Swap feature makes it easy to swap each sound of toms or cymbals.
Off-the-shelf drum hardware available
User Inst Library enables you to store 128 customized instruments
₹ 266495₹ 268500
Drum module for the EFNOTE 5 with Bluetooth, practice tools, and recording options
Two-zone toms (head/rim) with a 3-zone snare drum (head/rim/side-rim)
Every drum uses multi-sensor hot-spot-less sensing.
All drums have sturdy 6-ply wood shells with hoop rubber in a “warm-gray” tint and a Black Oak finish.
Drums come in the following dimensions: 12×5″ Snare, 10×7″ Rack tom, 13×13″ and 12×12″ Floor toms.
Kit includes the snare stand, cymbal stands/mounts, and the snare stand
Great Cymbals: Stunning “warm-gray” colored cymbals with excellent engraving, weight simulation with a thin edge for the right hitting feel, 360° flat sensing with multi-sensor
₹ 369070₹ 371500
2 x 1/4″ Hi-Z Instrument/Line Inputs and 4 Line/Monitor Outputs, 2 Headphone Outs
24-Bit / 192 kHz AD/DA Conversion, Touchscreen UI, Mixing Console with DSP
4 Mixers, Talkback, Monitor Control
Pre-FX and Post-FX Recording and MIDI I/O, ADAT / S/PDIF, and AES67
Intuitive touchscreen user interface
DSP processing (EQ, dynamics, reverb)
4 independent mixers with integrated talkback
₹ 163000₹ 199000
100% analog device with +24dBu of headroom.
Full digital control, automation, and recall via companion plug-in.
Relative stereo channel linking with separate L/R settings.
Mid-side operation for independent side and mid settings.
Selectable output stages: normal (electronically balanced) and IRON (transformer balanced).
₹ 326900
Requires compatible 500 Series chassis/power supply (not standalone).
ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis.
Passive stereo/dual-mono/mid–side 2-band analog EQ.
6 touch-sensitive encoders allow for automation of each parameter.
Innovative analog circuit control eliminates glitches and artifacts due to pot movement.
Knob movement is noiseless, allowing for full automation without side effects.
₹ 152500
Not standalone — requires compatible 500 Series chassis/power supply
ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis
Fully analog stereo/dual-mono/mid–side 4-band analog EQ with highpass filter and digital recall
Innovative analog circuit control eliminates glitches and artifacts due to pot movement
Because knob movement causes no noise, full automation is feasible without side effects
₹ 151500
Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like _TITAN or via USB connection
4 touch-sensitive encoders allow you to draw automation into your DAW
True bypass completely removes the circuit from your signal path
Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
Compatible with any WesAudio NG500 chassis and many standard 500 series racks
₹ 157200
Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like TITAN, or via USB connection
3 touch-sensitive encoders (Threshold, Mix, Make Up) allow you to draw automation into your DAW
True bypass completely removes the circuit from your signal path.
Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
Call for Price
Single-channel 500 Series saturator module.
Adds low-order harmonics and evens out the signal for a vintage tube console and tape recorder sound.
Increases RMS level, adding impact and punch to your audio.
LO SAFE option prevents low-frequency distortion, ideal for bass guitar, kick drum, and full mixes with prominent lows.
BAND SPLIT option allows selective saturation of low frequencies while preserving high-frequency clarity.
₹ 59885
Analog dynamics processor with compressor, limiter, and harmonics distortion capabilities.
Intuitive control panel without distracting meters for focused sound shaping.
Adds warmth, brightness, and character to audio with customizable DRIVE settings.
Vintage-inspired design with a FET transistor for subtle sound reduction and harmonics.
Two independent filters for precise timbre shaping without phase shifting.
₹ 74860