No products in the cart.
-
LaChapell Audio Model 583e 500 Series 3 – Band Equalizer – Amazing Facts!
- The EQ section functions autonomously from the preamp, allowing separate operation.
- A center-chassis mounted tube design effectively isolates heat, preventing interference with other 500 modules in the power rack.
- Swappable tubes offer the ability to achieve diverse sonic variations.
- This amplifier features genuine vacuum tube technology and offers fully adjustable input/output controls.
- Equipped with an 80% nickel output transformer and boasting a clean, attractive layout.
Call for Price -
Genelec S360AP Two-Way Smart Active Monitor
- Active crossovers for precise frequency distribution.
- Directivity Control Waveguide (DCW) technology for controlled dispersion.
- Intelligent Signal Sensing (ISS) Technology and iso-Pod Stand for efficient power management and vibration isolation.
- Laminar Integrated Port (LIP) Technology for improved bass response.
- Optimized amplifiers for enhanced audio performance.
- Protection circuitry to safeguard the speakers and maintain reliability.
₹489700₹495500Genelec S360AP Two-Way Smart Active Monitor
₹489700₹495500 -
Genelec W371AP Adaptive Dual Subwoofer System
- Smart Active Monitor (SAM) Systems
- 14″ (front) and 12″ (rear) bass drivers
- Optimized amplifiers, 400W per driver
- Active crossovers; protection circuitry
- Intelligent Signal Sensing (ISS) Technology
₹1129260₹1140576Genelec W371AP Adaptive Dual Subwoofer System
₹1129260₹1140576 -
Genelec 8361A SAM Three-way Coaxial Monitor System
- Dual 10.4″ Acoustically Concealed Woofers for extended bass response.
- Minimum Diffraction Coaxial Driver accepts Analog or AES/EBU Signal for versatile connectivity.
- Outputs AES/EBU Signal for seamless linking with other devices.
- Minimum Diffraction Coaxial (MDC) driver ensures exceptional imaging quality.
- Maximized Directivity Control Waveguide (MaxDCW) technology for enhanced dimensional imaging.
₹606520₹620578Genelec 8361A SAM Three-way Coaxial Monitor System
₹606520₹620578 -
WesAudio ngBusComp Analog Bus Compressor with Digital Recall
- 100% analog device with +24dBu of headroom.
- Full digital control, automation, and recall via companion plug-in.
- Relative stereo channel linking with separate L/R settings.
- Mid-side operation for independent side and mid settings.
- Selectable output stages: normal (electronically balanced) and IRON (transformer balanced).
₹326900 -
WesAudio Prometheus 500 Series Stereo Analog Equalizer with Digital Recall
- Requires compatible 500 Series chassis/power supply (not standalone).
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis.
- Passive stereo/dual-mono/mid–side 2-band analog EQ.
- 6 touch-sensitive encoders allow for automation of each parameter.
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement.
- Knob movement is noiseless, allowing for full automation without side effects.
₹152500 -
WesAudio Hyperion NG500 500 Series Stereo Analog Equalizer with Digital Recall
- Not standalone — requires compatible 500 Series chassis/power supply
- ng500 compatible with full support for WesAudio’s _TITAN Recall Chassis
- Fully analog stereo/dual-mono/mid–side 4-band analog EQ with highpass filter and digital recall
- Innovative analog circuit control eliminates glitches and artifacts due to pot movement
- Because knob movement causes no noise, full automation is feasible without side effects
₹151500 -
WesAudio MIMAS NG500 500 Series Analog Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like _TITAN or via USB connection
- 4 touch-sensitive encoders allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
- Compatible with any WesAudio NG500 chassis and many standard 500 series racks
₹157200 -
WesAudio DIONE NG500 500 Series Analog Bus Compressor with Digital Recall
- Full session recall and support for DAW automation when loaded in an NG500-compatible chassis like TITAN, or via USB connection
- 3 touch-sensitive encoders (Threshold, Mix, Make Up) allow you to draw automation into your DAW
- True bypass completely removes the circuit from your signal path.
- Switchable side chain filters for fine-tuning how the compressor reacts to bass frequencies
Call for Price -
LaChapell Audio 583S MK2 500 Series Tube Microphone Preamp
- First tube preamplifi er in 500 series format
- Burr-Brown and THAT balanced line drivers
- CineMag CMOQ nickel alloy output transformer
- Fully variable potentiometers for input and output gain stages
- 48V phantom power, 20dB input pad, and polarity reverse
- Front-panel, auto-switching transformerless hi-Z input for instruments
- Enclosed chassis, for superior cooling flow and interference characteristics
Call for PriceLaChapell Audio 583S MK2 500 Series Tube Microphone Preamp
Call for Price -
Miktek HM4 4 Channel Monitor Headphone Amp
- 4-channel stereo headphone amplifier.
- 4 1/4″ stereo headphone outputs and 1 parallel 3.5mm jack for OUTPUT 4.
- Individual volume controls for each headphone output.
- 1/4″ Stereo INPUT jack for versatile connectivity.
- MONO switch for easy summing of line level input.
₹5517 -
Miktek HM2 2 Channel Monitor Headphone Amplifier
- Balanced XLR microphone INPUT
- Balanced XLR microphone THRU to link signal to the main mixer
- 1/4″ Stereo INPUT for feeding a stereo monitor signal from the main mixer
- 1/4″ Stereo MIX THRU for sending the same stereo signal to multiple units
- MONO switch for summing line level input
- MIC GAIN to set the microphone at a desired level
- MIX GAIN to control the level of stereo input signal
- Headphone outputs on 1/4″ & 3.5mm jack connectors
₹5517