-
- The EQ section functions autonomously from the preamp, allowing separate operation.
- A center-chassis mounted tube design effectively isolates heat, preventing interference with other 500 modules in the power rack.
- Swappable tubes offer the ability to achieve diverse sonic variations.
- This amplifier features genuine vacuum tube technology and offers fully adjustable input/output controls.
- Equipped with an 80% nickel output transformer and boasting a clean, attractive layout.
Call for Price
-
- FET compressor with Zener and Germanium diode knee curve options
- Input control for signal level adjustment
- Gain make-up control for post-compression volume adjustment
- Attack control and 3-position ratio selection
- Sidechain filter for precise compression triggering
₹124431₹130980
-
- Vintage-inspired EQ for 500 Series rack
- English-style console EQ design
- Treble and bass shelf: +/- 18dB
- Treble at 12k, bass selectable 50Hz-110Hz
- Hi- and Lo-mid: +/-18dB, 7-selection “Q” switch
₹145730₹153400
-
- 30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
- 30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
- 1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
- 5kHz, 10kHz shelf boost, 0–14dB
- 5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
- Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
- Input transformer: 600 ohms
- Output transformer: 600 ohms
₹111729
-
- 30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
- 30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
- 1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
- 5kHz, 10kHz shelf boost, 0–14dB
- 5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
- Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
- Input transformer: 600 ohms
- Output transformer: 600 ohms
Call for Price
-
- First tube preamplifi er in 500 series format
- Burr-Brown and THAT balanced line drivers
- CineMag CMOQ nickel alloy output transformer
- Fully variable potentiometers for input and output gain stages
- 48V phantom power, 20dB input pad, and polarity reverse
- Front-panel, auto-switching transformerless hi-Z input for instruments
- Enclosed chassis, for superior cooling flow and interference characteristics
Call for Price
-
- Topology based closely on the original EMI TG12428 at EMI/Abbey Road studio
- Discrete transformer-balanced amplifiers produce a warm tone with clear highs and rich lows
- 48V phantom power, phase reverse, and an impedance switch
- Impedance switch toggles between 300 ohms and 1200 ohms, to match any mic
- Channel output gain control lets you run the input gain hot for extra color
₹112100₹118000
-
- Premium single-channel microphone preamplifier for 500 series chassis.
- Offers up to +60 dB of gain for versatile signal amplification.
- Switchable +48V phantom power for condenser microphones.
- Wide frequency response of 10 Hz to 140 kHz for accurate audio capture.
- Ideal for studio and remote recordings with high common-mode rejection.
- Polarity invert for phase adjustment and creative sound shaping.
- Custom Lundahl input transformer maintains signal integrity.
- Carnhill output transformer supports long cable runs without quality loss.
- Gold-plated Grayhill switch for precise 6 dB stepped gain control.
- Exceptionally low noise and distortion for clean audio recordings.
- Crafted in the UK with top-notch components and design expertise.
₹76074₹80078
-
- Inspired by EMI TG12413 compressor in historic TG12345 consoles.
- Selectable sharp and rounded knees for aggressive or subtle compression.
- Continuous controls: input, attack, release, and output (makeup gain).
- Vintage styling with VU meter.
- True bypass for signal comparison.
₹141246₹148680