No products in the cart.
Roll over image to zoom in
HEDD Type 20 MK2 3-way Powered Studio Monitors
₹198141
- 3-way Powered Studio Monitor with 7″ Woofer, 4″ Midrange,
- AMT Tweeter, CoP Technology, and DSP – Left Side, Black (each)
- Analog and AES digital inputs make system integration easy
- High-end, stepped aluminum potentiometers
- 3 Desk Filter options and 2 Shelving Filter options tailor the monitor to a room
HEDD Type 20 MK2 Active 3-way with Advanced DSP Summary:
HEDD’s unique Air Motion Transformer tweeters
When we tested the Type 20 MK2 here, we were blown away by the Air Motion Transformer (AMT) tweeter’s flawless transient response and ultra-high-frequency extension. This tweeter, handmade in Berlin, is one of the world’s most transparent. It reproduces high frequencies in an exceptionally linear manner, without distortion, and sounds wonderfully genuine. If you’re looking for a powered studio monitor that won’t create ear fatigue during long studio sessions, the Type 20 MK2 is a safe bet.
SHARC-powered HEDD linearizer processing.
The Type 20 MK2 features fully integrated HEDD linearizer processing. This SHARC-powered DSP eliminates time-related delays with imperceptible, 10-millisecond responsiveness. In practice, this results in excellent transient reproduction and a rock-solid, ultra-wide stereo image. Furthermore, you may synchronize the Type 20 MK2’s phase correction with a HEDD bass subwoofer to account for group delay in a satellite-sub arrangement. Do you want to hear your mix without DSP? Not an issue. The Type 20 MK2’s HEDD linearizer processing is simply deactivated.
Closed or ported, the decision is yours.
The Type 20 MK2, like other studio monitors, is built around a ported bass system, which generates a massive low-end response and remarkable low-frequency extension. However, sometimes you prefer accurate bass over enormous bass. That is why the Type 20 MK2 features HEDD’s Closed or Ported (CoP) technology. This groundbreaking function lets you select between two separate sounds. To achieve optimal accuracy, put the provided foam plug into the speaker’s bass port and select closed mode. Remove the foam plug and switch to ported mode for a loud, powerful bass sound.
HEDD Type 20 MK2 3-way Powered Studio Monitor Specifications:
Innovative 3-way design with a powerful 7-inch woofer and a separate 4-inch midrange driver.
The Air Motion Transformer (AMT) tweeter provides excellent transient response and ultra-high-frequency extension.
The HEDD linearizer processing offers excellent transient reproduction and rock-solid stereo imaging.
Closed or Ported (CoP) technology allows the speaker to operate in either closed or open-port mode.
Extend mode provides deeper low-frequency extension (at the cost of some SPL).
Adjustable volume and input sensitivity optimize speaker output and signal-to-noise ratio.
Specifications for drivers:
Woofer: 1 basket diameter: 7.2″ (182mm).
Voice coil diameter: 2″ (51mm).
Cone Material: UHC cone (Ultra Honeycomb Composite)
Midrange: 1 Basket diameter: 4.7″ (120mm).
Voice coil diameter: 1.25 inches (32mm)
Cone Material: UHC cone (Ultra Honeycomb Composite)
Tweeter: 1.
Type: HEDD AMT (Air Motion Transformer)
Equivalent Diaphragm Size: 2″ (56mm)
Input Connectors:
Analog connections include XLR or RCA. Digital/HEDD bridge options include AES67 Ravenna, Dante, and AES3/EBU.
General data:
- Amplification (ICEpower): 3 x 300 W
- Input gain is -30 dB + 6 dB.
- High Shelf EQ above 2kHz: ±4dB (at 20kHz)
- Low Shelf EQ (less than 200 Hz): ±4 dB (at 50 Hz).
- Frequency response: 32–50 Hz
- THD 90dB/1m > 100Hz: <0.5%.
- Maximum SPL sine wave (100 Hz–3 kHz/1 m): ≥110 dB
- The maximum SPL peak per pair at 1m is ≥120 dB.
- Crossover frequency: 250 Hz or 2.5 kHz.
- The input impedance can be balanced or unbalanced (10 kΩ or 47 kΩ).
- Weight: 15 kg.
- Dimensions: 280mm x 358mm x 338mm Technical specifications
- Powered:Yes
- Power Configuration: Tri-Amped
- Quantity: Single LF. Driver Size: 7″ and 4″ honeycomb woofers HF Driver Type: HED/AMT
- Total power: 3 * 300W.
- Frequency response: 32Hz to 40 Hz
- Crossover Frequency: 250Hz/3.200Hz.
- Maximum peak SPL: 120 dB at 1m.
- Input types include 2 x XLR (AES/Analog).
- Output type: 1 × XLR (AES pass-through).
- Other I/O: 1x RJ45.
- Enclosure Type:Front Ported Dimensions: Height: 02″, Width: 09″, Depth: 3″, Weight: 33.95 lbs.
Additional information
Powered | Yes |
---|---|
Power Configuration | Tri-amped |
Quantity | Single |
LF Driver Size | 7" and 4" Honeycomb Woofers |
HF Driver Type | HEDD AMT |
Total Power | 3 x 300W |
Frequency Response | 32Hz-40kHz |
Crossover Frequency | 250Hz/3.200Hz |
Maximum Peak SPL | 120dB SPL @ 1m |
Input Types | 2 x XLR (AES/Analog) |
Output Types | 1 x XLR (AES pass-through) |
Other I/O | 1 x RJ45 |
Enclosure Type | Front Ported |
Height | 11.02" |
Width | 14.09" |
Depth | 13.3" |
Weight | 33.95 lbs |
Reviews
There are no reviews yet.