sE Electronics X1S Condenser Microphone

sE Electronics X1S Condenser Microphone Overview:

Gold Standard Affordable Condenser microphone:

The sE Electronics X1 S cardioid condenser microphone is a top-notch condenser microphone that can be used to capture anything in your studio. One of sE Electronics’ hand-crafted, gold-sputtered 1″ diaphragms and an all-metal capsule are featured in the X1 S, providing crystal-clear, lifelike sounds and long-lasting dependability. The sE Electronics X1 S is perfectly suited for routine studio work because of its two-position pad and low-cut controls, which let you fine-tune it for any sound source.

The perfect balance of tone and isolation:

A fixed cardioid condenser microphone like the X1 S offers consistency and a simpler, more direct signal route. Multi-pattern microphones are useful when the work requires extra variety. You will undoubtedly notice the clarity and low-noise performance as a result of your mix. Since you’ll typically want a cardioid polar pattern nonetheless, the X1 S gives you the performance you require without charging you for extras you might not use.

A Preferred option for all acoustic instruments and vocal styles:

One of the main reasons for recommending the sE Electronics X1 S condenser microphone is tracking vocal sounds. The gender of the user is irrelevant to the X1 S. Any vocal style can sound fuller thanks to its forgiving and smooth sound. The X1 S is a superb microphone choice for tracking acoustic instruments, especially when it comes to the wider range of the acoustic guitar, thanks to the same broad and rather pleasing tone.

Bass roll-off and switchable pads provide greater adaptability:

The X1 S provides a few tactics that will help you get the greatest sound possible, right at the source when you’re up against a very boomy or overpowering sound source, such as when you’re close-miking a guitar cabinet or acoustic drum kit. First off, there is a built-in two-position low-cut filter that does double duty by both removing any low-frequency vibrations coming up through the mic stand and reducing the proximity effect you will experience when placing your mic very close to a sound source. If it is insufficient to prevent your preamp from overloaded, just activate the X1 S’s 10dB or 20dB pad to provide the additional headroom you require. The X1 S can maintain sound sources up to 160dB SPL with a huge reduction in self-noise

Two Switchable Attenuation Levels:

The X1 S is a tuned version of sE’s best-selling X1, refined for better performance in every way possible way. Extended dynamic range is made possible through the -10 dB and -20 dB pad switches. This enables a variety of applications and close-mic techniques for even the loudest instruments, such as extremely powerful electric guitars, forte brass instruments, and heavy-footed kick drums.

Two Switchable Low-cut Filters:

These two filters, which are switchable between 80Hz and 160Hz, aid in removing low-frequency rumble or footfall noise and aid in reducing excessive bass (proximity effect) when using close-mic techniques.

Premium Finish and All-Metal Housing:

The X1 S’s all-metal chassis guarantees efficient rejection of any electrical interference and noise, in contrast to some other “entry-level” microphones’ flimsy-built bodies. Additionally, the high-quality finish ensures a great aesthetic for years to come.

Gold-plated Xlr Connector:

Ensures a reliable, loss-free signal connection. A mic clip that may be used to attach the X1 S to any mic stand is included as standard equipment.

Specifications of sE Electronics X1S:

• Type of Capsule: Hand-Crafted 1″ True Condenser
• Polar Pattern: Cardioid
• Range of Frequencies: 20 Hz – 20 kHz
• Sensitivity Rate: 30 mV/Pa (-30.5 dBV)
• Maximum SPL: 140 / 150 / 160 dB (0/10/20 dB pad) (0.5% THD @ 1kHz)
• Equivalent noise level: 9 dB(A)
• Dynamic ranges: 131 / 141 / 151 dB (0/10/20 dB Attenuation pad)
• Signal Noise Ratio: 85 dB
• Low-cut filter: Switchable 80 / 160 Hz, 6 dB/Oct
• Attenuation Pad: Switchable 10 / 20dB
• Power: According to IEC 6193848 Volts
• Impedance: 125 Ohms
• Preferred load impedance: >1k Ohms
• Power consumption: 6 mA
• Cable Connectivity: 3-pin male XLR connector
• Measurements: Diameter: 58mm (2.28 in), Length 169mm (6.65 in)
• Weight: 445 g (15.70 oz.)