sE Electronics X1S Vocal Pack Microphone with Popfilter and Shockmount

Overview of the sE Electronics X1S Vocal Pack:

Everything you need to build an excellent recording chain, including sE’s straightforward yet incredibly effective metal pop shield.

X1S condenser microphone from SE Electronics:

Gold-sputtered real big diaphragm capsule manufactured by hand
modern SMT components for a short signal route, the biggest dynamic range, and the highest level of reliability
Very balanced and smooth sound
Two interchangeable attenuation pads
two low cut switchable filters

Handcrafted, Custom-designed Capsule

The X1 S uses a hand-made condenser capsule, which was painstakingly built and calibrated in sE’s capsule chamber by professionals with decades of experience.As a result, the capsule is constructed to be as capable of recording excellent musical instruments as any in the world.

Meet the X1 S,reasonably priced condensers:

The best-selling X1 from sE has been improved with the X1 S, which has been optimised for superior performance in every aspect imaginable.
In 2010, sE unveiled the X1, redefining the potential of an accessible hand-made condenser microphone.

High Efficient Electronics

The revised electronics of the X1 S increase its performance to a completely new level, giving it the highest dynamic range in its class, while the original X1 was already powerful.

Improved sensitivity, significantly higher SPL handling (up to 160dB! ), and a significant decrease in self-noise are also made possible by its internal layout.

Attenuation Levels ,Two Switchable

Extended dynamic range is made possible by the -10 dB and -20 dB pad switches. This enables a variety of applications and close-mic techniques for even the loudest instruments, such as extremely powerful electric guitars, forte brass instruments, and heavy-footed kick drums.

TWO LOW-CUT SWITCHABLE FILTERS

These two filters, which may be set to 80Hz or 160Hz, assist reduce low-frequency rumble or footfall sounds and help balance out too much bass (proximity effect).

Specifications:

Hand-crafted 1″ True Condenser capsule type
Pattern Cardioid
Range of frequencies: 20 Hz to 20 kHz
Sensitivity: 30.5 dBV (-30 mV/Pa)
Max SPL: 140, 150, or 160 dB (0, 10, 20, or 0.5% THD at 1 kHz), respectively.
9 dB(A) is the equivalent noise level.
Dynamic range: 0/10/20 dB Attenuation pad, 131/141/151 dB
85 dB Signal to Noise Ratio
Low-cut filter: switchable, 6 dB/oct, 80/160 Hz.
Attenuation Pad: switchable 10/20dB
Powering: IEC 61938-compliant 48 volts
125 Ohms electrical impedance
>1k Ohms is the suggested load impedance.
6 mA of current consumption
3-pin male XLR connection for connectivity
Size: 58mm (2.28 in) in diameter and 169mm (6.65 in) in length.
Weight: 15.70 oz or 445 g.

In the Box:

X1 S microphone
Isolation pack for the X1 S microphone (with pop shield)
Mic cable – 3 metres