-
- The MicroMain 27 is a huge and uncommon nearfield monitor with remarkable bass extension and fidelity.
- Excellent transient detail, mid-range resolution, and bass timing.
- High SPL capabilities while maintaining spectral balance at low levels.
- 4 setting DSP voice emulation
- Analog and AES3 digital inputs and Hypex amplification
₹1099500
-
- MicroMain45 is a three-way active monitor. Controls include an input level stepped attenuator and a voice choice for Multi-Emphasis Monitor Emulation.
- 610W Active Studio Monitor Pair with 8″ Subwoofer, Dual 2.5″ MF Drivers, and 1″ HF Driver
- An 8-inch aluminum cone subwoofer creates tight, powerful low-end all the way down.
- All Barefoot Sound studio monitors include multi-emphasis Monitor
- Emulation, or MEME technology,. The MM45s have a very wide sweet spot for consistent sound in any position.
₹624500
-
- Classic vintage charm from the original Pultecs with the assurance of modern engineering.
- Achieving a pristine and pure sound with an exceptionally low noise floor.
- Effortlessly recall settings using the user-friendly 21-position stepped switches.
- Unleash the full potential of guitars, vocals, woodwinds, and other midrange-rich elements with this outstanding EQ.
- Discover new realms of creativity through the versatility of separate boost and cut bands.
Call for Price
-
- 16 x 16 I/O on balanced TRS
- Front-panel stereo TRS Headphone jack
- 2 x 4 ADAT TOSlink optical ports
- SFP port for optional expansion module
- Optional Optical MADI I/O upgrade (SFP module available separately)
₹160700
-
- Seamless Dante Network Integration: Connect via 2 x RJ-45 Ethernet connectors using CAT5/6 cables.
- Built-In Brooklyn II Board: 64 x 64 channel capacity for Dante audio.
- Intuitive Control: 4 x TFT screens provide complete control over analog I/O levels and unit settings.
- High-Performance DSP: Equipped with powerful DSP for optimal audio performance and processing.
- MIDI I/O: Offers MIDI over MADI and remote control capabilities.
- Plug and Play: Easily integrates into Dante networks for hassle-free setup and configuration.
₹280243
-
- 30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
- 30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
- 1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
- 5kHz, 10kHz shelf boost, 0–14dB
- 5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
- Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
- Input transformer: 600 ohms
- Output transformer: 600 ohms
₹111729
-
- 30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
- 30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
- 1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
- 5kHz, 10kHz shelf boost, 0–14dB
- 5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
- Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
- Input transformer: 600 ohms
- Output transformer: 600 ohms
Call for Price
-
- Single-channel 500 Series saturator module.
- Adds low-order harmonics and evens out the signal for a vintage tube console and tape recorder sound.
- Increases RMS level, adding impact and punch to your audio.
- LO SAFE option prevents low-frequency distortion, ideal for bass guitar, kick drum, and full mixes with prominent lows.
- BAND SPLIT option allows selective saturation of low frequencies while preserving high-frequency clarity.
₹59885
-
- Analog dynamics processor with compressor, limiter, and harmonics distortion capabilities.
- Intuitive control panel without distracting meters for focused sound shaping.
- Adds warmth, brightness, and character to audio with customizable DRIVE settings.
- Vintage-inspired design with a FET transistor for subtle sound reduction and harmonics.
- Two independent filters for precise timbre shaping without phase shifting.
₹74860