-
- The MicroMain 27 is a huge and uncommon nearfield monitor with remarkable bass extension and fidelity.
- Excellent transient detail, mid-range resolution, and bass timing.
- High SPL capabilities while maintaining spectral balance at low levels.
- 4 setting DSP voice emulation
- Analog and AES3 digital inputs and Hypex amplification
₹1099500
-
- MicroMain45 is a three-way active monitor. Controls include an input level stepped attenuator and a voice choice for Multi-Emphasis Monitor Emulation.
- 610W Active Studio Monitor Pair with 8″ Subwoofer, Dual 2.5″ MF Drivers, and 1″ HF Driver
- An 8-inch aluminum cone subwoofer creates tight, powerful low-end all the way down.
- All Barefoot Sound studio monitors include multi-emphasis Monitor
- Emulation, or MEME technology,. The MM45s have a very wide sweet spot for consistent sound in any position.
₹624500
-
- Classic vintage charm from the original Pultecs with the assurance of modern engineering.
- Achieving a pristine and pure sound with an exceptionally low noise floor.
- Effortlessly recall settings using the user-friendly 21-position stepped switches.
- Unleash the full potential of guitars, vocals, woodwinds, and other midrange-rich elements with this outstanding EQ.
- Discover new realms of creativity through the versatility of separate boost and cut bands.
Call for Price
-
- Choose from optical compression, VCA compression, or both in series, for unprecedented dynamic control with a mastering-grade signal path
- Optical section provides smooth, program dependent leveling, just like a classic audio leveler from the late-’60s
- Discrete section gives you the fast, precise sound of a classic VCA compressor
- Sidechain frequency filter prevents frequencies below 90Hz from triggering compression for tighter-sounding mixes
Call for Price
-
- 30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
- 30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
- 1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
- 5kHz, 10kHz shelf boost, 0–14dB
- 5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
- Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
- Input transformer: 600 ohms
- Output transformer: 600 ohms
₹111729
-
- 30Hz, 40Hz, 70Hz, 100Hz shelf boost, 0–13.5dB
- 30Hz, 40Hz, 70Hz, 100Hz shelf attenuate, 0–17.5dB
- 1kHz, 2kHz, 3kHz, 4kHz, 5kHz, 8kHz, 10kHz, 12kHz, 16kHz peak boost, 0–18dB
- 5kHz, 10kHz shelf boost, 0–14dB
- 5kHz, 10kHz, 20kHz shelf attenuate, 0–16dB
- Amplifier: 20Hz–20kHz; +0, -1dB (ref: 1kHz, including input/output transformers)
- Input transformer: 600 ohms
- Output transformer: 600 ohms
Call for Price
-
- Discrete construction in Class-A technology
- Combines the gain section of the Shadow Hills Mastering compressor with the detector circuitry of the Shadow Hills Optograph compressor
- Controls for compression, ratio, filter and output level
- 4 Selectable compression rates
- 4 Switchable side-chain filters
- Uses handmade iron core transformers
- Double module width (requires 2 slots)
Call for Price
-
- Superb sound quality and character
- Switchable output transformers
- Stepped attenuator for gain control
- Phase reversible and padable DI and engraved front panels
- 75 ma current draw per module
Call for Price
-
- Five selectable polar patterns: figure-8, supercardioid, cardioid, omnidirectional, and custom.
- Microprocessor-controlled polarization voltages for precision.
- Analog highpass filters: Choose from 40Hz, 80Hz, and 160Hz.
- 10dB and 20dB analog pads for handling high-volume sources.
- Dual outputs for independent recording of each diaphragm.
₹107682₹113350
-
- Matched pair of large-diaphragm condenser microphones.
- Cardioid polar pattern for focused sound capture.
- Handmade 1″ ceramic capsule for precise audio reproduction.
- Selectable pad at -10 or -20 dB for handling high sound pressure.
₹67849₹71420