Stereo or surround sound monitor controller
Transparent, flawless sound quality provides you with an accurate picture of your mix.
Numerous I/O choices support a broad variety of applications.
You may get the entire dynamic range at any volume level with analogue volume control.
Perfect for sound design, music production, and post-production
₹ 88228₹ 89120
A Monitor Controller with Talkback, Headphone Amplifier, and Phonitor Matrix
Superb talkback setup featuring an integrated condenser microphone
Three monitoring modes: LR Swap, Stereo, and Reverse Phase
When using headphones, Phonitor Matrix replicates speaker-like spatial effects.
You can connect a single full-range mono monitor speaker to the subwoofer’s output.
₹ 127430₹ 128725
High-performance transformer-less tube condenser microphone.
Ideal for vocals, drum overheads, and pianos.
31.25mm dual-diaphragm capsule captures intricate details.
Innovative dual-tube circuit design with NOS military-grade tube.
Variable 9-step polar patterns: Omni, Cardioid, Figure-8.
₹ 208500₹ 231600
Type: Mono Limiter/Compressor Module
Format: 500 Series (Compatible with most 500 Series chassis)
Construction: Handcrafted in England by Neve engineers
Sound Character: Retains the original 2264A’s unique sonic characteristics with the same architecture, matching components, and original hand-wound transformers
Circuit Design: Diode-bridge limiter/compressor with high-headroom Class A/B design
₹ 133750
Excellent active circuitry produces flawless sound quality.
Use the same monitor controller to operate headphones and speakers
Dual headphone amplifiers enable simultaneous monitoring by two people.
Headphone monitoring is highly precise with crossfeed control.
High-quality balancing stages do not require a direct box.
You may connect either business or personal devices thanks to the adjustable input sensitivity.
You can connect a single mono speaker or subwoofer using the separate mono speaker output.
Switches for the source, speaker, mono, and dim
₹ 71562₹ 72285
A dynamic range of 135 dB is feasible
With 270 degrees of side and rear rejection, off-axis sound is attenuated by up to 25dB
Lauten Audio LS-308 has independent multi-stage low- and highpass filters
Includes a road case, a foam windscreen, a threaded hard mount, and a swing-arm mount.
Great handling characteristics with its internally shockmounted transducer element
₹ 50935₹ 53570
Classic end-address dynamic microphones is equipped with two dedicated filters for instant sound-shaping.
Applications:In Vocals,broadcast,electric guitar and brass
The 50Hz setting naturally reduces low-end and boominess.
32mm capsule that is internally shock-mounted and has excellent off-axis rejection.
New LS-208 requires 48 Volts of Phantom Power to work.
₹ 58104₹ 61163
High-performance 32-bit DSP processing and 24-bit, 48KHz sampling
Over 100dB dynamic range with +22dBu headroom
Adjustable input and output levels for optimal signal to noise performance
Low power consumption for cool running
Independent control of each program’s reverberant parameters
Nudge Buttons for easy data adjustment
Alphanumeric program descriptions for effortless memory management
New rotary push encoder for intuitive parameter adjustments by ear.
Call for Price
Large-format 88RS console preamp.
Legendary Neve color for all inputs.
“Big iron” circuit paths balanced with Marinair transformers.
Reference-grade AD/DA conversion.
Superior instrument audio quality from Neve DI circuits.
₹ 125000
8 channels of remote-controlled 1073 mic/line/DI preamps.
Neve Marinair transformers on microphone inputs for classic warmth.
Class A transformer-less DI input for direct instrument recording.
Remote control software manages up to 8 racks simultaneously (64 preamps).
Automatic total recall of all settings for easy session replication.
₹ 510000₹ 605000
5-Band Fully Parametric EQ
Stepped Knobs for Recall, Rack-Mountable
Dual-Mono or Stereo Operation
120V Rail Technology, Mastering Grade
Proportional or Constant Q, Auto-Bypass Mode
₹ 655830₹ 662450
Tube compressor/limiter with stereo and dual-mono modes.
All controls are switches or detented knobs for easy repeatability.
High 120-volt operating voltage for ample headroom and ultra-low noise.
Achieve transparent to sonically colored compression.
Internal control signal limiting delivers musical, lively sound.
₹ 587200₹ 593135
Choose from optical compression, VCA compression, or both in series, for unprecedented dynamic control with a mastering-grade signal path
Optical section provides smooth, program dependent leveling, just like a classic audio leveler from the late-’60s
Discrete section gives you the fast, precise sound of a classic VCA compressor
Sidechain frequency filter prevents frequencies below 90Hz from triggering compression for tighter-sounding mixes
Call for Price
Handbuilt, hand-wired multichannel analog compressor for 5.1 surround applications
Eminent sound quality with 6 transformer-balanced audio paths, electronically balanced outputs, and post-output transformers
Flexible sidechain routing and filtering are ideal for broadcast and mastering applications
Threshold, Ratio, Attack, Recovery
Call for Price
Legendary 3-band EQ design with iconic Neve sound.
High-frequency control with +/-16dB shelving at 12kHz.
Highpass filter with selectable slopes (18dB/octave) at 50Hz, 80Hz, 160Hz, and 300Hz.
Midrange control with +/-18dB peaking and fixed Q at various frequencies.
Low-frequency control with +/-16dB shelving at 35Hz, 60Hz, 110Hz, and 220Hz.
Compact 500 Series format for easy integration.
Signal presence LED for monitoring input level.
Audio Processing Insert design for use with 1073LB mic preamp.
Ideal for adding warmth, depth, and character to various instruments and vocals.
Captures the essence of the classic Neve 1073 EQ circuit.
₹ 214045
Discrete construction in Class-A technology
Combines the gain section of the Shadow Hills Mastering compressor with the detector circuitry of the Shadow Hills Optograph compressor
Controls for compression, ratio, filter and output level
4 Selectable compression rates
4 Switchable side-chain filters
Uses handmade iron core transformers
Double module width (requires 2 slots)
Call for Price
Superb sound quality and character
Switchable output transformers
Stepped attenuator for gain control
Phase reversible and padable DI and e ngraved front panels
75 ma current draw per module
Call for Price
True Neve 88RS mic preamp in a 500-series format, with transformer-coupled Mic input, electronically balanced Line and DI inputs and Line output
REGeneration feature allows Line and DI inputs to be fed through the Mic input transformer to inject the legendary Neve sound
Sweepable high pass filter can be switched in or out
Intelligent 48v phantom power function
-20dB pad and phase reversal features for Mic, Line & DI inputs
Signal Presence LED illuminates green from a level of -25dB and red from a level of +26dB Front combi-XLR connector for Mic input (XLR) and Line & DI inputs (1/4” TRS jack – LIFT switch eliminates potential ground loops when using unbalanced jack connectors in the front input
Compatible 500-series rack/enclosure with Power Supply and line-level input/output connectors required, not supplied.
Call for Price